Your cart is empty.
Your cart is empty.Reeka Rose
2025-09-02 17:38:42
for all the reviews getting upset that this dies after 3 months, it is a little $20 heater, and for those getting mad it does not put out much heat, it is a small $20 heater. on a smaller space closed up a bit it will help worm up what you need. I use it to heat the space for my 3d printers and this is perfect to get a nice warmth in there and keep it that way.What is more important is has not sparked or melted as i have seen other tiny heaters to in reviews.Don't expect it to last forever or put out a massive amount of heat. again a tiny $20 heater that is safe to use i am perfectly fine with getting another one in a few month if needed.
Jennifer Gilbert
2025-08-26 09:12:25
To be so small, it really kicks out good heat.
Michael Lamond
2025-07-10 11:18:52
I used this as the heater for a hermit crab enclosure. I had it hooked up to a thermostat that kept the tank at 80F. After 11 months the fan stopped spinning. Not bad, not great. It does work.
Kathrine Williams
2025-07-04 11:10:01
I needed a small heater to warm up my hands cause my office is an icebox all year round! This was the perfect fit and keeps my hands warm while I’m working.
Zach
2025-05-15 12:19:20
my partner wanted a portable heater for their golf cart at work etc. so I surprised them with this little heater. It works just not powerful for what he needed and felt more like a brief warm breeze than heat. Im sure it would work well in a more confined space that is small.
JDM
2025-04-26 12:31:53
I live in New England and bought this Feb, 2020 as my home office is in my basement and it gets cold down there during the winter. My use case for this little heater was to warm my hands while typing, similar to what a few others have purchased this for on here as well. I only run it for maybe and hour or two a day as it does get quite hot and my keyboard space is minimal so I don't want to melt my hands off. The hot air doesn't disperse too far away from the unit to warm the surroundings, rather it just intensely heats items within about a foot of it's front radiator outlet. I just turn it on for about 10 minutes, turn it off for an hour and repeat. Once April came I didn't use it for months until around late November/early December 2020. That is, until yesterday, Jan 19, 2021, when I heard the fan wind down and that was it. It appears to have died on me.After unplugging it and checking it out visually and with a can of compressed air to make sure it wasn't a power issue or something got in there and seized the fan (dust/dirt/etc.) I noticed that the heating element still works, but it just start baking the unit as the fan is what died and now the heat has no way to get extracted (pretty dangerous if someone wasn't present to notice this, in my opinion, as it has no auto shut off).I checked my "warranty" and saw I had 180 Days that was long past so I popped the grille off the fan and gave it a spin. It does indeed spin freely and I could detect the heating element warming up instantly, per usual. My manual spin actually brought the fan back to life, but at a fraction of the RPMs it was working at earlier in the day, and not nearly enough to push the generating heat out of the little unit.I may tinker with it later as it really does appear that the issue is just a cheap fan motor or some related part that died out, but it's a shame as the unit was exactly what I was looking for, did get nice and hot, and wasn't noisy or distracting while I was working or on calls.For the price and purpose I'd easily give it 5 Stars, but having the fan motor die, and thus the unit's usefulness negated and liability increased, after only have a few dozen hours under its belt is very disappointing.If the Manufacturer ever reads this I'd be more than happy to exchange it for another/newer model and re-review it if at all possible. Like I said, it was just what I needed while it lasted; which wasn't that long at all, unfortunately.
Brad B.
2025-04-23 16:01:09
Over all very nice little heater. I've run it for 5 hours straight and had no issues. I opened it up to see if there were any safety features and it does have a thermal switch in it. So it won't over heat and cause a fire! Which Is good in an office application. It does not have a tip over switch but at this price I doubt anything will. In my case I will actually be using this for a project. So for me less is actually more. For the average user this will be a nice little desk heater for your hands. Keep in mind this is not ul listed. However the over all quality of the internal components doesn't leave me with any concerns. If you are using it for a 3d printer enclosure heater then it will with out a doubt be a good choice. Something to note. The cord has a straight connector on the end of it not a 90°. Not a huge deal but if you are planning on using this for a project just keep that in mind.
djtrob
2025-03-19 15:06:55
The media could not be loaded.
ANA MONTELONGO
2025-02-17 13:24:52
me gusto mucho, ya mantengo mis pies calentitos en la oficina, su tamaño es pequeño asà que para mis pies esta genial, muy practico
Rafael araujo
2025-02-16 13:35:50
Fácil de usar ideal para espacios pequeños,lo puedes tener guardado en un cajón sin problema, muy fácil de usar
Juan Oviedo
2025-02-07 16:10:52
Buen producto, generador de calor personal, aunque nivel de intensidad bajo, buen producto, buena calidad, portabilidad, pero... la radiacion de calor es relativamente suave.
David Azr
2025-02-05 14:47:09
Lanza poco calor y se descompone a los 3 meses de uso.
Félix Cruz
2025-01-24 16:25:06
Si todavÃa pudiera lo devolverÃa, considero que no lo utilice mucho.
Recommended Products