Shopping Cart

Your cart is empty.

Your cart is empty.

Sali 20PCS Brad Point Wood Drill Bit Set 1/8” Carbon Steel Wood Drill Bit Set for Hardwood, Plywood, Plastic Round Holes in All Types of Wood Perfect for DIY Woodworking Carving Engraving Drilling

4.9 (13) Write Review
Free shipping on orders over $29.99

$6.99

$ 2 .99 $2.99

In Stock

About this item

  • What you get: 20pcs 1/8" Brad point drill . The diameter of the drill bit and shank is 1/8" / 3 mm, the total length of the drill bit is 2.56" / 65mm，and drilling depth is 1.42"/36mm the quantity is enough for your daily use.
  • Brad-point design -the brad-point design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in centering and no skid
  • Smooth surface - fully ground smooth drill bit body for less effort and higher accuracy. Titanium coating for higher wear resistance, ability to withstand higher temperatures, and increased durability
  • Perfect for all types of wood - these specially engineered drill bits are specifically made to reduce chipping and splintering. Easily drill into natural woods like pine, maple, cedar, oak, ash, and more. These also work will on all types of engineered woods.
  • Wide application - perfect for soft, hard materials like wood, fiberboard, particleboard, plywood, plastic, pvc, mdf, acrylic, nylon, rubber etc. They can also be used for drilling soft metal sheets. A must-have for any woodworker.


Product Description

1

Description

1

MATERIAL

  • Made of CRV Steel/High Carbon Steel with Heat-Treatment for High Hardness and Tensile Strength for Drilling.
  • For use in soft, hard, exotic, veneered, and laminated wood, plus MDF and acrylic glass

1

CUTTING POINT

  • With Center Cutting Point with 2 Side Spur Cutting Edge Enable Quick Drilling and Easy Pisitioning.
  • Optimized spurs ensure fast and easy cutting of wood fibers before hole is drilled

1

Parabolic Double Flute

  • Improved chip evacuation leads to a ultra smooth surface finish
1

A variety of electric drills for you to choose from

1

Cordless Electric Drill And Corded Electric Drill

  • Can Be used in Cordless or Corded Drill: Make sure the electric cordless or Corded drill is fully charged before application.

1

Easy to Use：

  • Step1: Adjust the chamfering，Rotate the Hex Wrench to adjust the length you need, according to the length of the screw.
  • Step2: Insert the countersink bit into your drill/driver. Please ensure that the drill bit is clamped!
  • Step3: Vertical drilling the drill bit during the operation, otherwise the drill bit would be bended or the chamfer surface is uneven. The depth only needs to allow the screw head to sink below the surface.

1

Attention

  • The drill must be kept completely vertical when drilling, so as not to be uneven.Otherwise, it will be easy to break the bit.

1

The Ultimate Drilling Technology

  • Cylindrical shaft
  • Hardwoods and softwoods
  • Beveled edge

1

ROUND SHANK

  • Round Shank Is Right Fitting with Various of Chucks of Electric Drills and Machines Tools.

1

Special design

  • SALI point drill tip design to provide easy positioning and accurate starts, made of carbon steel and heat treatment.
  • Multiple sizes for easy selection

Philip J. Smart
September 4, 2025
Very nice quality, really sharp, 1 bit still going strong!!!!!Over 100 holes!!!!!!!!
R. Southworth
June 14, 2025
Needed to drill holes 0.25 diameter. Plugs fit perfectly. Super sharp.
Customer
June 4, 2025
Ok, you've got a full set of drill bits. From 1/8" up to 1/2". Nice little stand up box. But if you use these for a while, I guarantee that during repetitive drilling, you will break the 1/8" bit. Unless built out of titanium or tensile strength A2 steel, these well made bits get more delicate as the size gets smaller. Why? Even though this is tool steel, you have to cut flutes in the shaft to clear your hole of the drilling shavings. That's a circular cut up the length of the drilling area of the bit. The slightest pressure in any other direction besides straight down will snap the bit. Buying spare bits at a reasonable prices will keep you on task when the inevitable happens. I only gave these 4 stars as even the best of bits will break and these cut well and break less often than others.
Gary R.
May 24, 2025
These seem to be good quality. I do a lot of cabinets with adjustable shelves so drill many many holes for shelves pins. These do the job great. Fast clean hole. Can’t comment on life as I have only had them for a few weeks but have drill 87 holes in oak plywood and solid oak and still going on first drill bit. I’m very pleased.
Travis Persinger
May 20, 2025
These are great bits. Especially for the price. Perfect for drilling pilot holes. No wobble in the bit from poor manufacturing, and hold their edge well. Especially for a Brad tip bit.
Dtlaw
April 9, 2025
Used to pre drill a couple thousand holes. Store bought would break sometimes after 20-30 uses and these averaged lasting a couple hundred uses each. I know breakage has more to do with angle of drill but also quality of bit. Good product.
Joe
April 7, 2025
They only got three stars from me because they kept breaking. I needed pilot holes drilled and instead I would have bits broken off where I needed to put a screw. I would have expected maybe two bits to break but broke seven.
Benny
March 28, 2025
These drills are sharp. Flutes are ground and run true in the chuck. Fair price for the quality
Klaus S.
March 24, 2025
Gute Qualität
JJ
March 20, 2025
Da kleine Holzbohrer zum Vorbohren bei uns immer verschwinden, habe ich einen größeren Pack für einen schmalen Taler bestellt. Was die Maßhaltigkeit angeht, kann ich keine Aussage treffen. Zum Vorbohren reicht es allemal.
Dennis
January 15, 2025
Habe diese Bohrer mir gekauft um Topfuntersetzer zu Bauen da ich 3mm Bohrer braucht mit Spitzte.
Andreas
January 6, 2025
Für normales Handwerken, gut geeignet.
Gerd B.
December 21, 2024
Klasse Holzbohrer die wirklich gerade sind. Kein eiern.