Your cart is empty.
Your cart is empty. Products with Luminlay inserted in Black pipe.
The pipe material is hard so the sanding finish will be beautiful.
These products fit to maple or light colored wood fingerboards.
SBM series Glow BLUE long time glow type
SGM series Glow GREEN strong glow type
Luminlay materials are made of highly mixed high quality glow in the dark materials and high clear PMMA plastics.
The outside is painted white so as not to lose the glow.
SB series Glow BLUE long time glow type
SG series Glow GREEN strong glow type
General Q & A
Q:How long will the Luminlay continue emitting light ?
A:If you charge a Luminlay dot just for several seconds, you can have enough emission of
light for about 20 minutes. The emission will be weaker as time passes, but, when in a
really dark room, you can see that the Lumilay dots continue to be luminous all night
long. Actually, on a stage, the darkness will not continue so long, and when the stage is
lighted, Luminlay can be charged also by the stage lights. The fact that many
professional guitar/bass players love using Luminlay proves the effectiveness.
Q:How long and how many times can Luminlay be effective?
A:Once Luminlay is installed, you can use it semi-permanently.
Q:What are the characteristics of “blue” and “green” A:“green” is brighter at the beginning, but “blue” is better in persistence. Anyway, you can obtain enough brightness from both, and you can choose the color as you like.
John Toner
2025-07-12 12:48:00
My client came in with an American Fender Precision Bass. It was less than a year old. He's in a busy gigging band. He requested larger side dots, as the factory ones were difficult to see on stage. I suggested a few options and included glow-in-the-dark side dots. He liked the idea of the glow-in-the-dark dots. I was going to order the 2.5mm ones from AllParts, but they were temporarily out of stock. I thought checking on Amazon would have results. I found the Luminlay SBM & SGM series/with black pipe / 60mm length (inner 2.5mm, outside 4mm, in glow Green and Blue). They are the same GITD side dots found on the Charvel San Dimas Pro Mods. My client was excited and chose the blue. The final result looks stunning (the black ring around the center really makes it pop visually), and my client was thrilled.
Furious Screed
2025-06-30 12:30:31
I already have the white pipe on my pau ferro fret boarded Dingwall D Roc. I got the black pipe for my maple fretboard/maple neck Combustion. A handy guy could probably do this at home, but it's worth the extra cost to me to have it done by a real pro, so mine is going to The Low End bass shop out here by Nashville.
Andrew H.
2025-06-13 18:02:59
This product comes with a small pipe of Luminlay that is enough to do up to 12 side dots for a 24 fret instrument with just a bit left over. I used a couple drill bits, one to make a pilot hole and then one that was the width of the Luminlay inlay, going about 3 to 4mm deep. Super glued the piece of luminlay into the neck using a small hammer to seat it in the hole. Clipped the protruding pipe with wire cutters as close to the neck as I could. I used a small fine toothed file and extra fine grit sandpaper to get the inlays flush with the neck. Extremely pleased with how these look and function. I use a small black light LED flashlight (that was also purchased from Amazon) to “charge†the dots and they glow nice and bright (as you can see in the pictures) for quite a long time.
Lionel D'abreu De Paulo
2025-04-06 10:24:50
Prompt delivery and product as described
Chris Jewell
2025-03-27 11:23:23
Replaced the white 2.5mm side marker inlays on my Jim Root Telecaster with these 3mm Luminlay with black outlines. Hand drilled out the old fret markers then pre cut the Luminlay to 3mm depth and pre polished with 1200 grit wet sand. Used super thin CA glue with whip tip.
MackenzieLeigh
2025-03-26 14:03:27
Patick Huffschmidt has so many colors - why doesn' luminlay?? Need red, pink, yellow, white etc...
Kevin
2025-03-05 16:14:20
Meh, I wasn’t impressed with it. I don’t think this is worth the money they ask for, it’s ridiculous. I ended up buying some glow in the dark dust here on Amazon for $12 mixed it with epoxy and it glows exactly like this rod, and I mean exactly. The only difference here is the black cover around it, but I made it with piece of 14-12 gauge cable insulation, filled it with the epoxy mix and it turned out exactly like this one. Just offering an option here.
Crystal Jones
2024-12-27 12:02:17
Ive bought this type of product in the past and have always been happy with this vendor.
Recommended Products
$26.67
$ 12 .99 $12.99