Your cart is empty.
Your cart is empty.Product Description
Why Choose Suprwin Clamps?
Strict Process & Sharp Tooth Tips
After the production grid processing technology, the teeth are in an inverted cone shape and are evenly arranged.
The depth of the teeth is large, and the tips of the teeth are very sharp to ensure that the jaws are clamped when clamping the car.
Can firmly grasp the iron sheet without falling off.
After special quenching and tempering, high-frequency equipment processing, the jaw hardness can reach
Above HRC55 degrees, the jaw teeth are not easy to wear and have a longer service life.
The jaw bite force is not strong
The jaw bite force is not strong, it is easy to fall off when stretched, and it is often processed
defect. The hardness of the product is low, and it will wear out after a period of use.
If you live in a maintenance vehicle, you will also need to replace the clamp with a new one.
Why Choose Suprwin Clamps?
Highest Strength Bolts
The highest-strength 12.9-grade bolts are used, and 12.9-grade bolts are used.
The tensile strength of the bolt is 1.7 times that of the 8.8-grade bolt, and it will never deform during normal use.
Common strength class 8.8 bolts
Using ordinary strength 8.8 bolts, after a long time of use,
The bolt will be bent and deformed, resulting in the jaw not being clamped tightly. If it is not replaced in time, the
Change, there is a danger of being caught in the process of stretching.
01/saving manpower
Clipper design to make operators do not need fixed by screws. Humanization design, very suitable for use in narrow space.
02/Increase efficiency
The small protrusion on the back of the jaw prevents the bolt from turning during the tightening process, without the need to tighten with two wrenches;
03/Big head pull ring
The front end and the mating surface of the jaws are tapered to ensure that during the stretching process, the tighter the pull.
04 / sharp cone tip
The jaw teeth are processed into sharp cone tips, with strong bite force, and after high frequency quenching, good wear resistance
Milton M. Oshiro
July 18, 2025
I didn’t use it for its intended purpose but it sure satisfied my requirement. I had to clear a piece of property with 3-5 foot brush. I just clamped the main stem and jacked away pulling them out. Made short of the job and I’m happy.
Roger Bertrand
July 15, 2025
Worked well unloading barrel out of my truck.
mark torke
June 27, 2025
Works very well form lifting 50 bags and no delicate items
Gene Littig
June 22, 2025
does not hold on sheet metal. Slips off. Dangerous
sarah
June 19, 2025
It strips the bark off the little bushes and isn't pulling the roots up.The teeth are too short to grab deep enough to make a secure grip.It slides right through the grip is supposed to have.I am not satisfied.I really wanted it to work to grab up small bushes with our farm jack.
Kindle Customer
March 31, 2025
picking up half inch plate steel weighed 300 lbs dropped on my feet
David R. Hicks
March 25, 2025
This tool was exactly what I needed to pull out part of the body of my Toyota. Great price and quality!
Coffe Lunch and Crab
January 22, 2025
This tool combined with high-lift Tpost puller easily removes 3ft concrete stakes.
Recommended Products
$24.25
$ 10 .99 $10.99