Your cart is empty.
Your cart is empty.Product Description
40CrMo Alloy Steel
Firecore SDS Max ground rod drivers are made from high grade, forged steel, providing longer life.
Heat-treated Handle
The proprietary heat-treatment process provides enough hardness to withstand frequent use without easily breaking.
Drives 5/8” & 3/4” Rods
10"(250mm) long, 13/16"(20mm) socket opening diameter, 3"(75mm) socket depth. Designed to drive 5/8” and 3/4” ground rods.
SDS Max Shank
Standard 18mm diameter SDS-Max shank. Compatible with Bosch, Dewalt, Milwaukee, Hilti, Makita, Hitachi and other SDS-Max rotary hammers & Hammer Drill
FS24250
Firecore SDS Ground Rods
SDS Max | Shank Type | SDS Plus |
40CrMo Alloy Steel | Material | 40CrMo Alloy Steel |
13/16"(20mm) | Socket Diameter | 13/16"(20mm) |
3"(75mm) | Socket Depth | 3"(76mm) |
10"(250mm) | Total Length | 6-11/16"(170mm) |
5/8" & 3/4" Rods | Ground Rods Size | 5/8" & 3/4" Rods |
SDS Max | Shank Type | SDS Plus |
40CrMo Alloy Steel | Material | 40CrMo Alloy Steel |
13/16"(20mm) | Socket Diameter | 13/16"(20mm) |
3"(75mm) | Socket Depth | 3"(76mm) |
10"(250mm) | Total Length | 6-11/16"(170mm) |
5/8" & 3/4" Rods | Ground Rods Size | 5/8" & 3/4" Rods |
- FS23170
- FS23170
pepik
2025-08-02 17:44:45
good product
Customer
2025-07-24 14:38:20
Great tool makes fast work in driving ground rods
Sam
2025-07-20 11:42:10
Product worked as described. Drove an 8' copper coated grounding rod into the ground very easily using my roto hammer.
A1Fence
2025-06-24 18:12:09
We use these to drive rebar dowels into concrete, and set steel form stakes (pins). Much faster and easier on your back than a sledge hammer all day!
Customer
2025-06-14 17:26:27
Solid piece of steel. Worked as designed. Fit my Bauer sds max hammer drill perfect.
Dick
2025-06-09 12:46:12
Used to set rebar using epoxy filled glass tubes. Ensured rebar driven to bottom of hole.
Misty Woosley
2025-05-28 13:41:33
This has worked well for both 5/8" and 3/4" ground rods. We were using a smaller driver with only a sds plus drill and it was ok unless you were in hard ground then a hammer. Boy this sure makes a big difference. The extra oomph from the big hammer drill does wonders. The bit works well on both size rods very well. We have done few 3/4" rods before but had to use a sledge for all of it and does that give you out quick. We have really enjoyed using the ground rod driver in the bigger hammer drill. Would defiantly buy again. Not sure on longevity but how can you tear it up.
Roilan duque
2025-05-26 15:15:56
Works well and fits correctly but if you are using a thicker ground rod make sure you screw on the coupling because if you hammer it directly it will flatten out and get stuck
pepik
2025-04-22 20:29:41
good product
Customer
2025-04-10 17:55:49
Great tool makes fast work in driving ground rods
Sam
2025-04-06 15:12:40
Product worked as described. Drove an 8' copper coated grounding rod into the ground very easily using my roto hammer.
A1Fence
2025-02-17 11:56:02
We use these to drive rebar dowels into concrete, and set steel form stakes (pins). Much faster and easier on your back than a sledge hammer all day!
Customer
2025-02-05 17:47:29
Solid piece of steel. Worked as designed. Fit my Bauer sds max hammer drill perfect.
Dick
2025-01-31 13:51:33
Used to set rebar using epoxy filled glass tubes. Ensured rebar driven to bottom of hole.
Misty Woosley
2024-12-30 18:15:05
This has worked well for both 5/8" and 3/4" ground rods. We were using a smaller driver with only a sds plus drill and it was ok unless you were in hard ground then a hammer. Boy this sure makes a big difference. The extra oomph from the big hammer drill does wonders. The bit works well on both size rods very well. We have done few 3/4" rods before but had to use a sledge for all of it and does that give you out quick. We have really enjoyed using the ground rod driver in the bigger hammer drill. Would defiantly buy again. Not sure on longevity but how can you tear it up.
Roilan duque
2024-11-28 17:13:00
Works well and fits correctly but if you are using a thicker ground rod make sure you screw on the coupling because if you hammer it directly it will flatten out and get stuck
Recommended Products