Mom of 3 Monkey Boys
2025-08-30 21:16:56
Perfect size for shower stool to replace disintegrated ones. They feel heavy-duty, so maybe get another 20 years out of this unconventional family "heirloom" that is priceless when one of us needs it, be it from age-related aches to youthful rugby injury.
NG
2025-08-26 11:40:40
Arrived on time and well packaged...fit the "feet" on a very old iron chair that happens to be a favorite. Can use this chair again!!!
WB Morton
2025-08-01 15:04:21
These leg tips replaced the cheap plastic ones that are taped on my ironing board. The fit was perfect, snug and sufficient length on the metal leg. I ended up buying another set for my drying rack that had the same problem. Unfortunately, this size was a little big. I returned the larger legs and bought a slightly smaller one (from 1 1/8" to 1"). The return process was flawless. The new set came in quickly...PERFECT FIT! I am definitely happy with these two purchases.
W Holmes
2025-07-28 10:55:13
This rubber tip goes on my wooden walking stick. Gives a little grip and also preserves the wood. I have tried different ones and this one lasts reasonably long. When the wood starts to show through, I just put on another one. Good value and does the job.
Randy Welch
2025-07-27 14:50:07
Good fit for my ironing board.
A Colorado Shopper
2025-07-05 18:29:14
This size of 1 1/8†ironing board keg caps fit my board and makes it very stable to iron in now. The instructions in the site say to measure inside diameter of leg. That ur incorrect. Measure outside edge diameter (side to side straight across with a ruler) and the 4 caps fit over each leg. Easy to install and balance is perfect! A great buy, reasonable price to fix my board!
MomC
2025-06-20 20:13:47
Worked perfect!
JW, PA
2025-06-16 16:08:00
My ironing board (old) was very unstable and this worked well. If I had a newer board it would be flatter.
Angela
2025-06-15 10:41:45
Não pedi isso e veio trocado
Kerry I.
2025-05-29 14:36:32
Purchased them to replace rubber feet on the bottom of a chair that is used in the bath. They fit well and the chair doesn't slip on the porcelain bath surface. Needed to drill a hole in the bottom to let the water drain out after a shower.
Beto Villa
2025-03-12 10:03:27
El material es muy resistente y quedaron a la medida.
Ani T
2025-02-20 13:46:19
Escogà tamaño Perfecto para patas de una cama de hierro forjado que pinte en color beige, pasa desapercibida la goma porque se disimula con el tono de la pata. Gracias por tener opciones de color
Ilpo
2024-12-25 16:20:56
This it's being used for a mobility assisting chair for a shower. We aren't using that chair in a shower so the original feet, made for a flat surface, punctured the bottoms in a bath tub. These are slightly curved and not designed for only a flat surface (chairs often have legs at a slight angle, normally) and being a slip on fit do the job admirably.The only improvement would be if they had tiny bumps of the rubber inwards to assist in retaining these on the legs. This isn't a deal breaker because it assists in removal to clear any water that collected within, so it wouldn't be stinky. They can be knocked off while lifting if they catch anything.