Roberta W Barclay
2025-07-26 15:05:02
These outdoor bar stools are very comfortable! The chairs are taller than what I envisioned so the seats are higher than what is ideal for a countertop table, but they work fine for my space nonetheless. The instructions for putting the chairs together were straightforward and the swivel works great. These bar stools are the perfect addition to my backyard patio.
J. Chevalier
2025-07-25 16:54:03
I’m enjoying this set of table and chairs. The chairs were a bit tough to put together but it’s worth the effort. I work from home and it’s comfortable to sit and and work on this table/chairs.
NC
2025-07-22 11:07:46
First of all, this is a very nice looking patio set. Looks a lot more expensive than it is from a distance. And seems of good quality. We have a small deck space and it works great with two chairs and a good sized table. Everything seems very solid and well-built.Please be aware of this is made of steel and not aluminum. So this will not be as light as some and it will not last as long as aluminum.I docked this one star because the armrest are not as solid as I would like at the front so when you start to get into the chair, those will move apart a little bit.Assembly: use some patience! make sure to get everything out and on the floor with instructions ready to go. Only take out the bolts and washers as needed (everything is clearly labeled). It takes some time.Contrary to some comments, this is not hard to put together, even with just one person which is what I did. It takes patience, planning and simple working knowledge of how things should go together in which order. If you don’t plan to follow the instructions or get very impatient quickly on things like that, this is not for you.The table comes in one box, which is the table top, the four legs and two centerpieces that you have to install.The chairs in another box. The seat bottom, seat back and legs. You’ll need to install the seat back, the legs and then attach it to the seat bottom. Last step can be the toughest.When putting things together, if you cannot screw the bolts pretty far in by hand, then you have it either misthreaded or not aligned properly.For seat bottom attached to legs you might need a rubber mallet to encourage some bolts to drop in the holes.Tip: before putting it all together, use some car wax on all the metal. It’ll make it last longer and not rust due to scratches and generally makes the paint look a lot better.
CC Guy
2025-05-07 17:38:31
Took awhile to put together but once done they are very comfortable. Quality material gives them a strong and firm feeling. Good looking chairs.
Randy P.
2025-04-28 16:36:02
Very comfortable, very sturdy and easy to move around. Not too heavy.
beau
2025-04-21 13:11:50
My first impression was positive. The product was meticulously packed and looked of good quality. I ran across a few problems when assembling, though. The assembly is not for the faint of heart. Several of the female threads were not accepting the screws. The threads were obviously stripped. I had to re-tap a couple of the M6-mounted female threads. Fortunately, I am an AC / Refrigeration contractor and have tools and know-how to improvise. I think that this would be a very frustrating problem for the average homeowner who couldn’t figure out why the screw was so hard to tighten. Had I continued without re-tapping the holes, I’m sure the screw head would’ve broken completely off or at the very least stripped out. Be aware of this and be careful if you’re using a cordless drill to tighten the screws. Always hand-tighten as much as you can before using the drill. This way, you can detect a problem with the threads before you torque them down and risk stripping or breaking them. I also found a couple of the lock nuts with threads that were also a problem. Fortunately, I had extra lock nuts on hand. Once assembled, the product looks great, but it’s these kinds of little problems that can stop the average DIY person dead in their tracks and lead to an unsatisfactory outcome. The product is good, but they obviously need a little bit better quality control over there in China. I also would’ve liked to have seen leg levelers on the table. They have them on the chairs but not the table
April G.
2025-02-02 12:22:46
Much bigger and sturdier than expected. Reviews scared me a little but decided to try. Very happy I did. This set is very nice and worked perfectly. Assembly was easier than expected.
Steve Renker
2025-01-04 17:19:46
Thank you!
Dan Rose
2024-12-29 12:23:24
We are very happy that we bought this set. I added shelving to the table (for storage of napkins, or whatever you want at hand. We also added an eight by twelve indoor/outdoor carpet so the bottom of the chair legs would not wear out with the movement on the concrete pad (rough surface. Now we enjoy it with our friends.
Steve
2024-12-10 18:28:20
Well they showed up a day late , not a big dealOpened boxes assembled , disappointed that once all together we noticed the arm cap was missing on one arm, we hunted through the boxes no luckIf not for that likely would have rated higherHopefully they will ship one expectation is low
Kathy L.
2024-11-26 12:47:58
Confusing!