Your cart is empty.
Your cart is empty.This is a lot of jointer in a small-package. It features a spiral-style cutterhead with indexable carbide inserts, knob-adjustable infeed table with lock for ultra-precision cutting depth adjustments, an in. and metric cut depth indicator and an east-to-adjust extruded-aluminum fence. You won't find a more feature-packed 6 in. benchtop jointer anywhere else.
Dan Man
2025-07-14 11:50:21
First time buying one and I'm really impressed with it. I'm not a professional or anything, but like wood working in my spare time. This tool has taken that hobby to the next level! My boards are awesomely smoothe after passing and it's so sexy. This is gonna make jointing boards so easy.
Lincoln Badger
2025-06-27 21:40:28
Great little planer. Easy to assemble and was parallel and square right out of the box. Makes nice smooth cuts. The only gripe I had was the manual said the bolt downs were 3/8. They are actually 5/16.
Justin Leonard
2025-06-03 20:12:24
Definitely not the simplest tool to setup - it took several tries to parallel the infeed and outfeed tables. The manual isn't very clear on the procedure and tech support is outright useless - the important point the manual fails to make is you want the outfeed table at the *lowest* parallel plane to the cutterhead, if you make it parallel in a higher position you won't be able to match the outfeed table without increasing the cut depth above zero. The pictures in the manual are too small to be helpful.Note the fence isn't easy to setup either - the locking mechanism can push it out of alignment, so double check it's flush to the outfeed before attempting to square it.Once all that is done... it seems to work quite well! The cuts are quite clean - comparable to the feel of sharp hand plane. I was able to face joint and edge joint 8' long boards with some practice, although a dedicated floor stand unit is probably appropriate if you do long jointing frequently.You need some kind of dust collection for this to work well - I wouldn't want to use a shop-vac for anything more than a board or two.The manual isn't clear regarding the mounting hardware - it indicates 3/8" hardware, but the holes in the base are 3/8" wide - so you actually need something closer to 1/2" screws. I'd wouldn't recommend using it without some kind of attached base, otherwise it's prone to tipping in operation.
Ex Walmart shopper
2025-04-30 13:50:58
The assembly was easy as long as you don’t try to use the useless instructions. Just looking at the picture of the assembled item was more useful. Not as well built as some other machines that I was considering but as long as I don’t abuse it I think that it will last. The other ones that I was considering cost two to three times as much. If I was buying it for commercial use I probably would have got a more expensive one but for a DIY tool this is a good alternative. This one has a carbide cutter head and some of the more expensive ones don’t. This was the reason why I picked this one. I was impressed by how it cut square and straight right out of the box. Being a machinist for 42 years has made me a perfectionist. I have gauges that reads in increments of .0001â€. I was prepared to spend as much time as it took to calibrate it but I didn’t have to!
Freelance
2025-04-04 18:16:10
Super awesome find. I’ve done my research I could’ve bought a more expensive tool. But this one does the same job as one twice the cost. Awesome quality I have no regrets would buy the same one again. I use it every week.
keyriverguy
2025-03-29 13:29:56
I have am very happy with this jointer. It required me to make no adjustments to get a nice clean cut right out of the box. If needed both side of the jointer can be adjusted. Two cut pieces fit together perfectly. I am hoping for many years of wood working with no issues.
scott
2025-03-19 12:10:27
The media could not be loaded.
Captneddy
2025-02-28 14:24:09
Love this little guy. I went through it for build and calibrating and found it for quality. Easy to set up and built solid enough for my birch and hard maple requirements. I purchased this at a price point being cheaper than retail and "used". It came within a week to my door in the original box having been opened (the original box was in a padded Amazon box). The unit had been used what appeared to be once but all in all excellent condition having taken it down myself for inspection. I do this like a lot of you guys do just to see what these things are made of and how they operate. This unit uses the four sided small flat razor sharp blades situated in a pattern to accommodate a helical cutting effect. I need a joiner to produce the smoothest cuts possible and this gem does the trick. I mounted it on a DeWalt portable stand from hell and couldn't be more pleased.
JONATAN
2025-02-17 17:06:35
lo primero las bases no estan 100% rectas, no es exagerado el desnivel pero para exigentes si lo es yo cambie las bases deje la mas pareja en la salida la otra es la valla tambien esta desnivelada y esta es la que mas me molesto por que tiene pansa en medio sobre toda la longitud y eso hace que batalles para alienarla a 90° y al hacer pruebas si la pieza es chica da un resultado diferente a si es alta, además que si ejerces presión en la valla con piezas grandes si se flexiona un poco, otra desventaja pero no es queja es que para piezas largas es muy difÃcil y con resultados no muy buenos yo me apoye de unos rodillos ayudan pero no mucho si el nivel del piso no es parejo además de que se ocupa apoyar la pieza siempre sobre algo plano estoy pensando agregarle unas extensiones de triplay, en conclusión no estoy desanimado se que estas canteadoras son asà algunas son peor como la knova, pienso rectificar la valla y bases con lijas sobre un vidrio para mejorar los resultados ya que me gusto que no hace tanto ruido y deja buenos acabados
Recommended Products
$1,999.99
$ 99 .00 $99.00
$719.99
$ 99 .00 $99.00