Your cart is empty.
Your cart is empty.MorFlex technology is used for high flexibility and kink resistance, lightweight polyester braid for easy handling. The MorFlex hose is equipped with threaded fittings with dual O-ring design to fit both 14mm and 15mm connections and includes a 14/15mm threaded hose connector. Polyurethane outer jacket is non-marring, abrasion resistant, and designed to fit most gas pressure washers with standard threaded connections. Up to 140°F maximum temperature, these are used as original hose replacement or an extension of an existing hose. 90 Day limited accessory warranty
J. Sterling
June 24, 2025
I bought this to replace the factory hose that came with my 3400 PSI Ryobi Pressure Washer (Auto-Idle version). The factory hose ended up leaking, even after multiple attempts to fix the leaks. The leaks were so bad, that the pressure washer wasn't able to idle, not to mention the length of the hose was too short for me to wash my cars.This hose, however, is awesome. Very durable, does not leave marks on the ground, does not leak, easy to use, and it is very long. I can practically put my pressure washer at the end of the driveway, and wash all the cars in it without having to move the unit. It doesn't leak, and what I found most interesting in their hose ends, vs. the Ryobi factory one, is that the Simpson has 2 O-rings per end, and the connections actually screw on deeper than the factory Ryobi hose. Pretty much, if it leaks, it will be because this hose is very very old or the o-rings go bad. Because of the attempts to reduce the leaks, the Ryobi pressure washer can deal out quite a bit of water now, and it can idle like it is supposed to without issues.The only downside vs. the Ryobi factory hose is the thickness of the hose. Granted, the diameter of the Ryobi hose was about the size of my pinky, but with this hose, you will have to unwind it every once in a while when using it. However, it does not kink, and that is a good thing. However, all of this is expected for a hose built with this kind of heavy duty quality. It did come with extension adapters, but I have not used them. I threw my old hose out due to the leaks it had, and currently I don't need to add any more hose.
TonyD
June 22, 2025
This is my second hose purchase, the first one was 25 feet second 50 feet. Rolls up easily and does not kink.No leaks, adapter included, much better than the hoses that come with the power washer
Jbrad
June 15, 2025
Still runs great haven't had an issue.
delump
June 11, 2025
It's a good quality hose, just a little stiff. Functional, just not the most flexible.
Shutterbug Guy
June 10, 2025
This is a high quality pressure washer hose, identical to the original supplied with the OEM sprayer from this manufacturer. It does include a male to male coupler, so with the original pressure washer hose, you can have a 75 ft hose to use. I chose to just remove the original 25 ft hose and use the 50 ft hose alone for now.The only frustration I have is that this hose is a little bit unwieldy because it is strong and a bit stiff. But I'm sure it will become a little bit more flexible over time. I prefer the strength and durability, rather than having too thin of a hose that would not last.
Steve
May 26, 2025
It takes a little longer to purge and roll up, but it's well worth it. You don't have to move the washer, for the bigger jobs.
Customer
May 17, 2025
This hose is great. It is the same type as provided with Simpson Pressure washers. For the price, these are great for residential and light commercial applications. Same applies to the type of pressure washer that this would be used on. I had my last one for 10 years and it still works just fine. I purchased a larger PSI washer and had to upgrade to the larger hose. The only complaint I have is that the adapter that comes with the hose is a 14MM x 15MM adapter, not 14MM x 14MM. Rendering this adapter useless as a hose x hose connector (per the instructions provided). I checked at Lowes and all of their Simpson hoses have the same adapter. From what I have found the 15MM size is used on electric washer hoses. Beware if you are purchasing this as an extension hose to purchase a M22 hose adapter with a 14MM x 14MM bore.
Randy H
April 24, 2025
Works great, exactly what I needed.
Nicholas D
April 18, 2025
Excellent quality hose, great flexibilty and durabilty so far! I bought this to replace the 25' hose that comes with the Sun Joe SPX3000. I felt it was more worth it to buy a 50' as opposed to the 30' Sun Joe HD hose. It even comes with an adapter to make it 75' by using the stock with it, if you desire. Pressure is exactly the same, if this is a concern. Probably slightly better gpm's. Overall great buy!:)
Josée L.
March 17, 2025
très bon produit , durable et de bonne qualité
Riles
March 13, 2025
I was looking for a thicker hose, with less kink to replace the one that came with the machine.Good value for the money, pluse I was able to get a length that's good for me.Time will tell about the durability.
Stéphane Bergeron
January 12, 2025
Le tuyau est un peu rigide
Firepsych
December 30, 2024
Someone said this fits the older Simoniz S1800 so I assumed it would fit the S1900 YL02 model, but it doesn't. Quality looks good etc but really can't give a legitimate review.
Recommended Products
$133.45
$ 55 .99 $55.99