Your cart is empty.
Your cart is empty.The attraction is obvious! for perfect registration, the Size magnetic platform uses high-grade magnets to hold thin its, frameless and other chemically-etched, wafer-thin dies securely in place during cutting. This makes them instantly compatible with the BIG kick, big shot, big shot pro and Vagabond machines. To die-cut one layer of thin material using Size frameless, thin its and other chemically-etched wafer-thin dies, the magnetic platform is required along with cutting pads. The diagrams on the magnetic platform and its tabs offer easy guidelines about how to make the perfect Size sandwich.
Mom
2025-07-10 11:07:17
I have a Spellbinder Platinum cutting machine and this plate works perfectly. It is only half as big as the standard platform, but l am finding that to be very handy.The magnets are very strong. It has a warning to say that the magnetic field it generates can interfere with a heart pacemaker, so be aware before you buy it.This platform is perfect for cutting a bunch of tiny dies in one pass without having to use tape to hold them all down. It is also great when you are cutting patterned papers and you want your die to line up with the pattern.A smaller platform is much easier to use. Fewer cranks to get it through the machine. Very few dies need the full-sized platform.Another benefit of the smaller size is that it is more affordable. The standard size magnetic platform costs around $70, so this is a great deal.I did purchase brand new acrylic plates and a self-healing mat to use with this platform. I make a sandwich using this platform, a sh mat, the paper and dies, and one acrylic plate. Then l use lightweight cardboard, aka cereal boxes, as shims, if needed.Very happy wirh my purchase. Planning to buy one for a fellow crafter as a gift.
shopper
2025-06-10 15:20:53
This makes die cutting so easy. The dies stay in place on the paper and the cutting is the same as with the original platform. This is a game changer, especially when cutting multiple dies at the same time. I can't believe I went so long without it. It's a purchase well worth it's price if you want to stop taping dies or having them shift.
Susan H. Sackett
2025-06-01 14:35:59
Using this magnetic board makes cutting with thinlets super easy! My cuts were perfect!!!!
Linda Lee
2025-05-14 12:28:12
I bought this Sizzix, Multi Color, Magnetic Platform for Wafer-Thin Dies 656499 several weeks ago, and finally had the time to experiment with it yesterday. I have several very pretty ornate hearts, butterflies, and frame dies. But I couldn't get the entire die to cut out all of the die. So much wasted paper and time. Very frustrating!!!I have the Sizzix Big Shot Plus. I found that using the small magnetic board, Heavy Weight Scrapbooking paper, and the Blueberry plates, I am able to successfully get a full cut out of these lovely ornate dies. It takes extra time, but it is worth it.Here are the steps I do:~ I cut heavy weight scrapbooking paper to fit the magnetic board.~ I make sure that I am using 2 flat Blueberry plates that have matched curves, but are as flat as possible.~ In making the "sandwich", the magnetic board goes on the Big Shot Plus face up. Then place one Blueberry plate on top of the magnetic board.~ Place the heavy weight paper on top of the center of the paper. Then place the ornate die FACE DOWN on top of the paper.~ Place another Blueberry plate centered over the magnetic board and first Blueberry plate.~ I then run the "sandwich" vertically through the center of the Big Shot Plus, and wind it backwards too. I repeat this 2-3 times.~ Keeping all the "sandwich" together, I now turn the sandwich horizontally which fits perfectly from edge to edge in the 9 inch wide opening of the Big Shot Plus.~ I run the "sandwich" back and forth through the machine.~ I lift the top Blueberry plate off. I pick up the die with the heavy paper still attached to the die. I check the paper very carefully to see if there is still a place that needs to be cut.~ If there is an area that still needs to be cut, I use another set of flat Blueberry plates and repeat the process, making sure that the paper is not shifted out of the ornate die.~ Success and no wasted paper. Gorgeous ornate frames, hearts, and butterflies.I am very happy with this small magnetic board. The magnet is truly strong. It is so helpful in holding a die in place through the bottom plate of the sandwich.Kudos to Sizzix for making this magnet board.
Jim Gonsalves
2025-04-30 17:38:45
Good quality and material
Janet
2025-04-13 13:30:18
This helps keep die cuts in place when running through my Big Shot. Use it often.
Donna d
2025-03-11 12:17:01
Works well, fits machine well
1Beach4u1
2025-03-06 18:57:08
The magnetic platform has a strong pull. My metal dies wont be sliding around now.
Dulce Maria Hernandez
2024-12-19 20:01:28
Sirve para troqueles bebés o texturizadores
Francesca
2024-12-14 14:44:38
Super comoda, indispensabile per chi utilizza la Big Shot!
Client d'
2024-12-13 15:54:09
Pourquoi formidable : plus besoin de repositionner mes dies, du premier coup tout est droit, cela ne bouge plus le temps de remettre la plaque du dessus
schamon
2024-12-01 19:54:05
Ich habe länger gehadert und hin und her überlegt, ob ich das Geld für diese magnetische Platte in die Hand nehmen will…Und bin froh, dass ich es gemacht habe.Ich stanze nicht in rauen Mengen, aber auch für mein gelegentliches Basteln ist das eine wunderbare Erleichterung, weil die Sachen halt nicht mehr verrutschen!Zumindest bei der Papierstärke, die ich meist verwende (bis 200g)Dickeres Papier habe ich noch nicht ausprobiert.In einem Video habe ich schon den Tipp gesehen, Papier zum besseren Anlegen beim Kleben mit Magneten darauf zu befestigen! ->🤩klappt hervorragend! (Also neben der Stanzmaschine)Ich kann sie nur empfehlen!
S
2024-11-28 10:16:17
جيده
Recommended Products
![Retaining Clip Rings Compatible with Cricut Maker and Explore air, Keep Rubber Roller Wheel from Moving, Rubber Roller Resolution for Cricut Maker [12 pcs]](images/loading.gif)