Your cart is empty.
Your cart is empty.Product Description
We're a small business and our team put the spirit into skate idea and create an icon - A Skateboarder with A Waving Tie, which encourages to relax on skating or skateboarding after a whole busy day working, symbolizes daily life should be more liberty, rapidity, strength and adaptability.
About this item
Note: These 608 size bearings fit 8mm skates, it requires adapted spacers sleeves if wheel axles are 6mm or 7mm diameter, please double check the skate axles size.
- Pre-lubed precision 608 8mm bore x 22mm outer diameter skateboard bearings (Set of 8)
- Premium chrome steel balls and races, accurate clearances groove
- Reinforced nylon ball cages, both sides unique pattern removable rubber seals
- Plus coating nylon lock nuts and speed washers, logo holographic pattern paper
-
GOLDEN ORANGE
Replacing worn to durable one
Another high-personality for advanced skaters. replace original one with the golden coating for longer life span than normal.
- Golden thin protective coating of steel races, light-weight, hard-wearing, rust prevention and unique aesthetic looking.
- Seven polished chrome steel balls, fine finish races groove and optimal clearances, ensuring rolling smooth, fast speed and high impact toughness.
- Special nylon ball cage balance strength and elasticity, reducing vibration and noise effectively.
-
NEON PINK
Replacing worn to shiny color
For high-personality for advanced skaters. replace original one with the oil slick shiny for longer life span than normal.
- Oil slick thin protective coating of steel races, light-weight, hard-wearing, rust prevention and unique aesthetic looking.
- Seven polished chrome steel balls, fine finish races groove and optimal clearances, ensuring rolling smooth, fast speed and high impact toughness.
- Special nylon ball cage balance strength and elasticity, reducing vibration and noise effectively.
Impressive Replacement Kit
From Lock-nuts to Washers
Choosing to replace the easy worn out parts with all the compelling durable and aesthetic appeal one, including skateboard/skates truck nuts and washers
Fit 8mm Truck Axles
Compatible with most skateboard, longboard, cruiser board, surf skate, modern roller skates and more.
- Bearing Sizes: 608 8mm bore x 22 mm OD x 7mm Thickness, 0.31"x0.87"x0.28"
- Lock nut bore: 8mm(5/16"), thickness: 17/64"
- Washer thickness: 0.7mm
Pick It Up
Pocket-sized carrying package, flat and fit snugly, put into pocket and take away.
Product Wt: 4.3 oz - Sizes: 2.76"x3.15"x0.67"
Note Before Use
- The color of bearing ball retainer/cage is not certain depending on the batches, it could be different colors.
- You could take a short bearing break in for the best rolling performance instead of hand spin.
Skate in versatile terrains
Crucial parts for skating and skateboarding
For skater who need better performance across diverse terrains and conditions, whether in session training, outdoor skating or seasonal riding, choose the right bearings for a smooth, reliable ride that enhances your tricks, styles and experience.
ThePandaPhotographer
2025-09-04 15:59:40
The media could not be loaded.
Don't buy save your money item sucks My opinion.
2025-08-31 13:08:43
Fast and smooth in the wheels waiting for my Royal trucks to finish the test.
JD
2025-05-28 18:06:24
These started very fast though I did take the time to put some lube on before install as mine were dry when they arrived but the shields will not stay on during use. I've had this issue on other bearings at times and there is no rhyme or reason to why but some brands have shields that just will not stay in place if they are street/park skated hard. So the shield will come loose but can't fall completely off because of the axel nut and this allows dirt to work it's way inside but doesn't let it come back out easily. The only solution when this happens is to remove the shields, clean off the lube and run them dry so dust doesn't stick to the lube and accept they are not going to last as long as they should so that is the phase I'm in now. 2 good sessions before the shields came off and now I'm 3 sessions running dry and sheildless and they are still working well enough but who knows for how long. These started very quiet and fast so I think they are more suited to longboards or cruisers, some designs just can't handle street skating impacts.
Matthew Danielson
2025-05-06 11:24:03
I was very excited about these. I loved the gold colorway and included hardware, they seemed decently smooth, and I liked the promise of titanium durability.They might have delivered, but the shields are a weak point. I ended up popping of the caps, which in some ways I prefer, but it definitely limits the speed and longevity a bearing can offer since the balls are now always covered in dirt.Honestly, for the money, I prefer Reds. But, these are still definitely a valid option with a unique style.
aarliann
2025-04-28 20:04:46
I had some old rusty bearings that were loud when rolling on an old board and thought these bearings would be a good replacement to breathe some new life into that setup. It was well worth the upgrade, after switching these in the wheels spin a little slower freely but they’re finally quiet and look immaculate. Also, because these have rubber bearing caps I can oil them up the next time things get loud. Hoping these will last me longer!
Thomas L. Jackson
2025-04-24 17:54:28
I purchased a new long board and wanted something other than the stock hardware for my new ride. I ran across the Naivskb Skateboard Bearings for a good price, so these were the luck ones that I went with. This bearings set cane with everything that I needed to do a full swap out. The Bearing were well engineered, I couldn't find not one defect on any of the bearings. The install took me less than 10 minutes, as the bearing literally slid right in. Truly a flushed fit. Prior to installing these bearings, I noticed that my wheels were pretty laggy and restrictive. After putting these on, I noticed an incredible difference, The wheels glided way more freely, which allowed me to pick up a lot of speed with less effort. Again, solid product, I don't have anything to complain about. Definitely recommend to anyone looking for a performance upgrade.Best Regards,Amazon Vine Voice (Product Reviewer)
David White
2025-02-21 17:17:11
These are undoubtedly better than standard common bearings out there. The thing i noticed the most right away is how quiet they roll. I think its because the bearing balls are polished and shiney. Or a combination of that and the titanium coating. They roll extremely well and have nice tight rubber seals on both sides. I always space my wheels out on the trucks so the axles arent sticking out so the fact that they give you a full set of gold washers is awesome. They feel incredibly tight too. Most bearings have a slight yaw and wobble to them. These dont at all. Super tight and nice. Love them. I would be surprised if you can find better bearings for the price!
J. Agey
2025-02-15 13:55:08
The media could not be loaded.
DM
2024-12-21 17:25:33
We have an abundance of skateboards, scooters, freeboards and even 3D printer parts that use this size of bearing and these are great quality replacements. It's not obvious in the listing but it suggests they're ABEC 9 which I'd well believe. £6.91 at the time of writing is a bargain!
Recommended Products