Your cart is empty.
Your cart is empty.Product Description
Size
- Wheel Diameter: 2 inches
- Wheel Width: 1.14 inches
- Groove Depth: 0.4 inches
- Total Height: 2.5 inches
- Mounting Hole Diameter: 0.25 inches
- Plate Thickness: 11 Gauge (3mm)
Installation
The V groove wheel can attach to the sliding gate in different ways
The thick mounting plate is designed for weld-on installation; the holes on the mounting plate are for bolt-on installation (1/4" bolts needed)
ABOUT THE V GROOVE WHEEL
Material
The v groove wheel is built with solid construct, consistent quality and corrosion resistance
It's made of high quality standard 45 # steel which is galvanized
With sealed double 6000RS chrome steel ball bearings, it can roll smoothly and last long
Load Capacity
Each heavy duty caster allow load 650 lbs capacity, and all four casters easily carry up to 2500 lbs, supporting and rolling the heavy duty gate steadily
Rosemary Norris
2025-09-04 14:37:56
Roll smoothly, easy to install, very sturdy
TK
2025-08-24 10:02:52
High quality. Heavy. Works well.
paul dennison
2025-06-26 11:31:32
Used these to make a rod bender for my press. They’re holding up ok and have bent 5/8†rod with them so far.
Andrew stegner
2025-05-24 10:07:26
Overall they are built fairly well, however the only thing that concerns me is the bolt that goes through the bearings. The bolt fits snuggly in the bearing near the head of the bolt, however the side towards the nut doesn't and has some play in it. I suspect that this is because of the threads on the bolt instead of being a shoulder bolt which would eliminate this play. Over all construction seems very well aside from this.
j
2025-05-09 17:39:34
I used these for a shed door. They ride on a piece of 1 1/2 angle. They're quiet and smooth when in use. They've been outside for 2 years in all types of heat and freezing temps. They still look brand new.
Dave in CO
2025-04-20 13:55:52
double heavy duty...match mounting hardware carefully...bolts would be best or 3 " hex head screws
Timothy C. Tripp
2025-04-11 10:07:17
Easy to install to 2x2 tubing. Smooth operating. Bearings appear to be high quality
FEDERICO
2025-04-05 18:14:17
Very good product😂
Avery Penner
2025-03-02 14:20:30
Works as advertised, bit more friction than I was expecting.
Jos
2025-02-23 11:38:37
Good product
Jon
2025-02-05 14:29:26
des bonnes roues sur des bon bering
trekkerkev
2024-12-30 10:22:00
replaced standard nylon wheels, these inverted V Groove wheels on an inverted V-track have much less rolling friction and have changed the roof rolling off from a hard job to an easy job.
Recommended Products
$23.99
$ 11 .99 $11.99