Your cart is empty.
Your cart is empty.This 12-Inch compound miter saw, model 3821, includes the Quick Mount System, a laser, extension rails and a powerful motor that make it an ideal miter saw for any intermediate Dyer or woodworker.
Ryan_79
2025-09-05 17:36:21
Does precise cutting with its laser guided feature. Strong motor, cuts through a 4x4 with ease. Great mountable tool.
David J. Mulholland
2025-08-31 11:47:30
This was my first time buying a major power tool through Amazon. And, I would do it again. The SKIL compound saw is a great saw. It is built very solid. The extended arms on each side have been very beneficial. The best part is the laser light which takes away the guesswork on where the saw will cut. The angle markings are dead on - it's horrible when you use a saw that says you are cutting at 45 degrees only to find that it wasn't really a 45 degree cut - you wont' have that problem with this saw. Like any saw, it can generate a lot of saw dust, so the dust catching bag is a benefit as well. I have used this saw quite frequently, and I am still getting great cuts out of the original blade that came with it. I use the saw for general household repairs and also for doing compound work for molding and trim. Any fears I had about purchasing a major power tool online have been overcome, and I will return to Amazon to purchase more in the future.
tylioromiosaurus
2025-08-20 12:16:03
I love this saw! At first I thought the laser light wasn't working, but alas there is a switch on the handle that turns it off and on. It is very easy to set up and adjust. All of my test cuts have been very accurate. The extension bars on the side are nice, although will only work with shorter cuts. Overall, a nice saw and a great price.
Classy
2025-07-27 12:47:08
Great price with the Father's day $15 discount and aligned right out of the box. Easy to set up, cuts are smooth (although will be getting a better blade), light weight and although I have not used lasers on my other miter saws, this one made cutting so much easier. I would recommend for any DIYer as a must have. Would have given it five stars if not for issues with registering the saw for warranty on-line.
robert markgraff
2025-07-03 13:01:09
Works great
Bill
2025-06-07 13:32:29
First let me start by saying I can afford to buy any saw from $1.00 to 100K. I looked online a little and saw this one read the reviews and decided to go with this one. Like the headline says it's a good saw for the average homeowner and weekend woodworker. This is all you would need why waste your money on features you will probably never use. Hope this helps everyone that is considering this saw you will not be disappointed if you purchase this saw.
Carol
2025-06-03 11:27:54
I had it just beyond the return time frame and it popped like a circuit tripped. Turns out it was the motor or something. Had to take it in for service which could take weeks. It is also not a compound bevel as described. Had I read reviews before I bought it, I would not have bought it.
Lost and Found
2025-05-23 18:21:27
It's my first miter saw, so I can't compare it to other saws like a seasoned carpenter, but for a DIYer like me, it's great, and I'm glad I got the 12" and nothing smaller, as I cut 4x4 posts on one chop with this one. The stand made for it is also a must-have for me, as it is very solidly built and a perfect fit. I did get a better blade for it of course, as the one that comes with it is just for rough cuts, but is adequate for many jobs.
HORACIO G.
2025-04-29 18:49:21
Ok
JTF
2025-04-08 14:45:04
Replaced a smaller sliding mitre saw that drove me nuts with this unit. Easier to move, cuts everything I need, better made, feels more stable even though it was a lighter weight than previous. Terrific buy,
T N
2025-04-04 17:30:17
I purchased this to replace some boards on a 45 degree deck. The value was unmatchable for this DIY project. I found the carbide blade in this unit to be OK, but a little rough.I was going to try to switch it out for a Diablo blade and read the instructions on how to remove the blade.Let me tell you, there is one screw and then an IKEA style hex wrench. Both the screw to move the blade guard and the bolt holding the blade were so over torqued that I nearly stripped both, was sweating like a pig and cut my hand. There is no way anyone could expect a human being to remove those two screws.I’ve ordered a replacement, but I am a little worried that this was an issue on a brand new unit. Had I decided not to switch the blade in the first week I had it, I might have tried this in a year or two when then components are older. The saw would become useless if that centre bolt was stripped.I would suggest when you receive the unit, read the section about how to remove the blade. Loosen the blade guard bolt and the bolt that holds the blade right away, then retighten them snug but not so snug that the bolts end up stripping.UPDATE:Bolts on replacement unit came off easily in order to install a finer blade.Further, the bolt down for the angle has a plastic end on it, while the first unit was just metal on metal that pulled the cut off by a half degree.
SavageContracts
2025-02-17 12:20:20
Great saw weak laser, glad I have great eye sight
Cape Bretoner
2025-01-31 10:47:05
I'm on my 3rd set of brushes.It very powerful. I use it as a cut off saw at the mill so it gets heavy use .
Recommended Products
