Your cart is empty.
Your cart is empty.Slime Tube Sealant prevents and repairs flat tires caused by puncturing objects up to 1/8-inch (3mm) in diameter. Slime works repeatedly to repair new and existing punctures and is guaranteed to perform for up to two years. Slime Tube Sealant seals multiple punctures repeatedly, and is non-toxic, non-corrosive, non-flammable, non-aerosol, and also water soluble. This inner tube formulation should not be used in a tubeless tire. Slime sealants are designed to treat tread area punctures only and should not be used to repair sidewall punctures, snake bites, rim spoke punctures, or gashes from metal or glass.
Joe W
August 25, 2025
I’ve been using the Slime 10004 Dirt Bike Tube Puncture Repair Sealant on my KTM EXC 450 with the Tubliss System, and I have to say, this product has exceeded my expectations! Whether I’m riding on the street or tackling the roughest single track, including challenging river crossings, this sealant has kept my tires sealed to the rims and provided peace of mind.Reliability and Performance:The real test for any sealant is how well it holds up during extreme conditions, and Slime performs flawlessly. On both pavement and technical off-road trails, I’ve never had issues with losing air pressure. Even after hitting sharp rocks and navigating through muddy, rocky river crossings, my tires have remained perfectly sealed, and I haven’t had to worry about flats.Tubliss System Compatibility:Using this with the Tubliss System on my KTM EXC 450 has been a game-changer. It complements the Tubliss setup perfectly, keeping both the high-pressure and low-pressure sides properly inflated. The sealant flows into the inner tube, filling small punctures almost instantly, preventing air loss during those long, rough rides.Ease of Use:Adding the Slime sealant to the tires was simple, and the product works quickly to seal any small punctures or leaks. The bottle is easy to handle, and you don’t need any special equipment to get it into the tire. I’ve had to use it a few times during my rides for minor punctures, and the results are always quick and reliable.Overall:If you ride a dirt bike, especially one with the Tubliss System, the Slime 10004 Dirt Bike Tube Puncture Repair Sealant is a must-have. It provides excellent protection against flats, keeps your tires sealed under tough conditions, and saves you from the hassle of constantly checking air pressure or dealing with tire issues. I highly recommend it for anyone who rides in rough, unpredictable conditions. It’s definitely earned its place in my gear bag!
DragonFire1024
August 14, 2025
I love this stuff. It works like a charm and is easy to clean up even when you finally have to change out the tube or tire. There might be a little bit of spillage but it's nothing that doesn't clean up with a little warm water and a towel. Seals amazingly well. Add enough to the tube and it will seal even brand new punctures even while the debris is still in the tube or tire. Definitely worth the money. I plan on getting one of the bigger jugs and refilling up a small bottle to take with me in my bag just in case. Easy easy easy.
Carol
July 12, 2025
The slime sealant has been a real lifesaver for my cycling. It’s easy to use and works effectively, sealing punctures fast and preventing flats during rides. I've already avoided a couple of flat tires thanks to this sealant, which has saved me a lot of hassle on the trails. The fact that it's non-toxic and eco-friendly is a big plus, making it a safer choice for both me and the environment. Suitable for all tube tires, it's a must-have for anyone who wants reliable protection against punctures while riding.
Looking for only best products Watching you
June 25, 2025
Great product
Buster Brown
April 27, 2025
I've used Slime in previous bike tires with tubes, and they've saved me from several punctures. (well, still got punctures, just didn't lose air.) I've also used their inner tubes that come with Slime inside, and they worked well. (no flats, so....)This time applying this was pretty difficult, having to remove valve stems and then somehow squeeze in the correct amount of slime per tire.The problem is that there's no clear strip on the bottle to judge amounts. Though I noticed there are some bump like things on the bottle where I could gauge the halfway mark, and if you old bottle up to the light, you can get an estimate of how much is left.It didn't help matters trying to get the clear filler tube out from under the adhesive label. I'm not sure how youre supposed to do this, as the label will not peel off easily.So I got out a little pocket knife and slit the label next to the tube to try to remove it.Got the valve removed, got the tube onto the stem, which was very difficult since you flatten the tires first, and the valve stem pushes into the rim when you try to push the tube onto it.Having to try to hold the valve stem while pushing the tube on is pretty difficult.But I got it on, went to squeeze the stiff bottle that's NOT made for squeezing, and .... Slime poured out of the side of the bottle all over my hands. Yep, I'd accidently put a tiny slit in the bottle while trying to cut the label and get the tube out. Nice.Had to struggle a lot getting the stuff in while holding a rag over the slit. A big mess. And it took several complete squeezes just to get a quarter of a bottle into the tire.Was doing the rear tire and another big squirt of this stuff came out and all over rim and tire. This stuff isn't fun to clean up. ha.But at long last, I got roughly a quarter bottle in both tires as per instructions, and got valves back in and rode a bit to distribute the stuff.I go on faith that this will save me from flats, as I've had luck with it in the past.Lesson: Be very careful if you resort to cutting the label to get the fill tube off the bottle.Could be improved with clear panel with measuring marks on bottle. Making the bottle not to stiff that even if you squeeze it as much as possible, it only squeezes out a small amount, making it necessary to remove the entire tube and bottle, get air back into the bottle, and repeat several times just to get a 1/4 bottle into a tire.
Rafael Contreras Nava
April 26, 2025
Realmente si me funcionó para sellar una fuga entre el rin y el neumático en una de las ruedas de mi patÃn eléctrico, auque el producto advierte que solo sella pinchaduras en la franja de rodamiento yo incline la rueda para que al lÃquido se mantuviera a un costado entre el rin y el neumático y si selló. Gracias...
Customer
April 24, 2025
Very good product. Works very well.
M.E.
April 5, 2025
Does not work. Had a most tiny puncture of 1mm or less, causes the tyre to slowly go flat , can see green fluid leaking from it but simply not sealing it. Disappointed
Werner666
January 24, 2025
Works great ,I had a small nail in my bicycle tire it plugged up the hole for over a year so far,I always keep a small bottle in my backpack while cycling
joel barrera
January 14, 2025
Works even in inner tubes
Recommended Products
