Tom
2025-09-04 16:43:11
Cannot beat this for the price! It fits perfectly on the 1qt bottles of fluid. Pumps fast and smoothly without adding too many bubbles to the mix. Worked great for my trucks transfer case service.
Shaun
2025-07-13 14:22:46
Works like it should. Very handy
Nikalis Roberson
2025-06-17 17:09:57
Perfect fit for quart jugs, works well, seems to be durable and worth the money.
Greener
2025-02-05 10:06:28
Does the job, far from perfect though. leaks a bit.Finally got around to changing the transmission and diff oils this past weekend in my 1999 Jeep Wrangler Sahara 4.0 5sp.The kit comes with a couple of tubes to install and they are great for the 1QT bottles, but too short for the 5QT bottles. With the 5QT bottles i just tipped the bottle to get the oil level to reach the pump tube.The screw on cap didn't work with my Redline oil containers, and actually was small enough to fall in to the 5QT bottle. But all this was to be expectedIt handled the thick 75W140 oil just fine, however it lead at the nozzle end. It didn't really seem to leak much on the 90w transmission oil, but it did a bit on the 75W140 diff oil. I was going to use a zip tie to help seal it better, but it didn't warrant me getting up off the ground and stop my progress. i will do it before i need to use it again.Overall happy it worked, and didn't break or fail mid job, really no major gripes. If anything I would find a longer tube for the 5QT bottles.
Ron S
2025-01-28 13:46:53
Much better than the tube-type pumps. This one screws onto the bottle and has worked in multiple uses. Some of these others are one and done, as the seals deteriorate.The Slippery Pete pumps have worked in multiple jobs for me. Power steering, transmission, and differential fluids are no problem for this pump.
Dark Helmet
2024-12-23 15:50:23
For some strange reason certain companies use bottles with odd sized openings (smallish) for their oil. There are no pumps for these bottles. This pump will loosely fit over those weird bottle openings and still work. You just need to hold the pump on the bottle and be careful not to spill any.The pump works great. The plastic clip at the end of the hose is nice and handy for holding the hose in the fill hole. Eventually a small amount of oil will start to leak between the hose and the plastic clip... I'm guessing a zip tie or small hose clamp should help with that. Good product and works well.
Harold
2024-12-21 16:31:51
I used this to refill the transfer case in a JGC. The pump works very well and makes it easy to fill where fill holes are difficult to access.
Customer
2024-11-17 13:40:53
These pumps work great for pumping gear oil or anything else you need to fill. Great product
Tobias
2024-11-13 18:45:36
Tut was es soll