Your cart is empty.
Your cart is empty.Product Description
Dedicated Cage 2168C
Cage for Canon EOS M50/M50 II/M5 Camera
Offer lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of cameramen during shooting
-
Tripod Shooting
For use in low light and when shooting longer exposures
-
Stabilizer shooting
Conducive to the stabilization and anti-shake of the picture
-
Handeld Shooting
More comfortable, more flexible, adjust the angle at will
vincent
2025-08-21 17:29:32
I purchased the SmallRig Canon M50 Cage and I have to say, I am impressed with its quality and functionality.The build quality of the cage is fantastic, it feels solid and durable. It provides great protection for my Canon M50 camera and at the same time, it does not add much weight to the camera making it easy to carry around. The cage fits the camera snugly and securely, I never have to worry about my camera coming loose during use.The cage has a variety of mounting points for accessories, making it easier for me to attach different devices to my camera setup. The included NATO rail and cold shoe mount are especially useful for me.Overall, I am very happy with my purchase of the SmallRig Canon M50 Cage. It is well worth the investment for anyone looking to protect their camera while adding versatility to their setup. I highly recommend this product to any Canon M50 owner.
Robert Cheng
2025-07-20 14:58:46
I have not dropped my camera and hopefully never will, so I cannot comment on how well the frame protects the body. However, after some use, I can give a review on the fit of the frame and the comfort of it on my Canon M50.I noticed when buying this that many people were commenting that the rig was made for a M5 and that a M50 was slightly too small which caused it to move a little within the frame which would eventually lead to the mounting screw coming loose. Many people posted solutions to this in the review section on how to fix it by putting another point of contact between the camera body and the frame. I purchased this knowing that I may need to utilize one of these DIY fixes, but to my surprise when I put it on my body, it fit like a glove. There is no wiggle in the camera when mounted on and it feels very secure. Maybe smallrig updated their frame size to better accommodate the Canon M50?In terms of comfort, I have relatively small hands, so the small body of the Canon M50 felt pretty comfortable in my hands even though some people, especially those that have used bigger bodied DSLR cameras before may feel that the body is uncomfortably small in their hands. This is a great solution for that since the groove around the battery makes the grip much larger and really gives you a much larger area to grasp. My only complaint is that it is pure steel all the way around the frame including in the grip area which covers much of the nice rubbery grip of the camera's body. This means that you trade in the grippyness of the grip for a larger sized grip. You can always DIY fix this by putting some type of adhesive there by yourself, but it would have been a nice touch for smallrig to add something to make the grip feel just that much more secure.I would highly recommend this product, especially if you are planning to mount many things to your camera as it gives you and extra shoe mount and many other places to add accessories.
Dia
2025-05-22 14:29:20
I use the EOS M50 primarily for still photography and was finding it awkward to use due to its small size and light weight. I kept accidentally pushing buttons as I was positioning it in the tripod or moving the back screen. It was driving me crazy and I was considering returning the camera.This has transformed the M50. There's now a better, more secure grip and the camera has added weight so it feels solid and less fragile. There's easy access to swing the battery door and the bottom rail serves as a plate that fits into my arca Swiss clamp. This works well for me and I'm happy.I experienced a slight wiggle until I did the simple & quick "gaffer tape" fix as mentioned by another reviewer and now it's solid as a rock. This has been a positive addition and I'm quite satisfied with the rig. Plus, I am all set if I decide to use it for video.
Dr. Barbara Nostrand
2025-05-21 15:32:57
I previously purchased the original version of this cage. The original version obstructs the WiFi button on the side of the camera. I purchased this upgraded cage which does not obstruct the WiFi button when I noticed that it is available Regardless, SmallRig makes good mechanical accessories for cameras.
Pdxcasterman
2025-05-19 11:50:36
Very well made unit however there has been many complaints about the M50 camera having some play within the cage, when I received mine and installed my camera I too discovered the slight play (looseness) within the camera and cage, I looked at where the camera touches the cage and noticed some raised ribs on the bottom of the camera around the threaded tripod hole, these are there to keep the camera in place when mounted on a traditional tripod, I simply took my Dremel tool with a small sanding drum and cleared about a postage stamp sized recess about 1/16" deep around the inside mounting point of the cage and created a small recess, this now allows the camera to sit flat inside of the cage with absolutely no wobble at all, once you've made the recess you can simply color it in with a black sharpie. Really quick, simple and effective fix.
J-Zone
2025-04-23 12:19:38
This fits my M50 perfectly. It added more grip. The quality is very good and I like that I can connect it to any arca swiss plates.
Jorge Leyva
2025-04-14 14:54:32
Es increÃble el producto, un poco caro es cierto, pero buenÃsimo sobre todo para armar un set up funcional y modular para el flujo de trabajo, muy bueno, ahora a complementarlo con más accesorios
Cliente
2025-03-27 13:15:00
Soy usuario de la M50 y encaja a la perfección. He leÃdo muchos comentarios negativos sobre su fijación y holgura, pero he de decir que en mi caso ajusta perfectamente. No se mueve y cuando empuñas es una pasada. Ahora bien, si es cierto que, usando objetos pesados (800-900 gramos), al voltearla para poner la tapa, los dedos hacen presión sobre la cámara y la desplaza un poco respecto al cage, desajustadola y dando la sensación de que la toma del tornillo pueda romper. Es un escenario muy particular y habrá que tener cuidado, pero lo veo dentro de la normalidad, tal ves si tuviese otro punto de apoyo detrás de la cámara, harÃa sujeción en ambos sentidos.PROS: muy ergonómico, ligero, práctico, versátil y bonito. Para objetivos pesados, no lo duden, para objetivos ligeros APS-C, es un plus que no está mal. Adicionalmente añade algo más de protección a la cámara.CONTRAS: con objetivos pesados puedes hacer presión y separa el Cage de la cámara dando la sensación de que la toma del tornillo de la cámara pueda romper. No es compatible con los adaptadores Viltrox usando los soportes para trÃpode. Cierto es que no es necesario el Cage con el trÃpode, pero: 1. Anuncian que es compatible y cuando vas a atornillar el soporte en el Viltrox encaja justÃsimo, y cuando aprietas los tornillos ves como el Cage se desplaza haciendo presión una vez más, la toma del tornillo de la cámara puede ceder y romper.2. DeberÃa ser compatible con los adaptadores Viltrox al 100%, no siempre me apetece estar poniendo y quitando el Cage.
Dorian
2025-02-19 13:48:58
Commandé cette semaine, reçu hier, je l'ai immédiatement monté sur mon EOS M50.Il va à merveille, cette version permet de mettre un adaptateur Canon pour utiliser les objectif EF et EF-S dessus.Cette cage semble solide... elle permet également une meilleur prise en main de l'appareil car sur ce modèle la poigné est assez petite et j'ai de grande main, cela ma donc permis d'avoir une meilleur prise en main !!!!
Recommended Products