Your cart is empty.
Your cart is empty.1 USqt. (32fl oz.) UV (Sunshine) Activated Polyester Resin (can be used indoors with a black light (385-410nm)
Jose
2025-07-15 12:04:46
Works great drys fast and is really strong worked for my project
Reviewer2
2025-07-09 11:21:01
This product does what it says , But you can take your time with fiberglass and that normally doesn’t go together, get all your edges flush , smooth , keep brushing cause it doesn’t harden till you tell it. I’ve been in car audio for 20yrs and this makes life so easy. Way worth the extra money for not having to mix a 2 part and have to rush just to have your brushes get hard and go bad. If you see any product with SMD label it’s there to help.
yogegoy
2025-07-04 19:05:05
You can do a lot of things with this product because it gives you great manual control when you want the resin to start curing. It offers how much resin you just need by reusing the leftover in for future use, I rather keep it in a separate container than pouring it back in it's can. Although it is a bit pricy, you can surely weigh it's benefits. Very glad this is not an alternative, it's going to be my primary resin.
james Peterson
2025-06-16 14:40:09
Great product, works just like it states. Direct sunlight, instant hardness. It does smell strong but still not as bad as Regular resin. I highly recommend this product.
zach eastman
2025-03-20 16:10:56
Obviously I'm not able to give this product a 4.7 score, but that's where I would put it. The product itself is amazing, I've been building fiberglass products and curing them with a black light indoors in just a few minutes. I bought one can to test out, and after I found it to work so well I ordered four more. I can't believe how fast this sets up. With my black light I'm seeing a 3 - 10 minute cure time depending on thickness and amount of resin. My only complaint is that this brand of UV reactive resin is slightly more expensive than others. If it was $70 per gallon it would get 5stars from me
Robert
2025-02-21 14:56:27
Had 2 quarts sitting around for over 1 year which worked better then the 2 extra quarts that I needed to finish my project. Product needs A LOT of Ventilation until you throw it out in the sun. Needed to buy a quart of Bondo resin to finish project, not as much lingering smell from the Bondo brand as the SMD SUNFLASH. (Don’t leave one dot of product on your table, the smell will be there for days.....) Great product for beginners or slow worker working with fiberglass or if you need perfection but if you know what your doing save the $10.00. Live in Vegas so I have plenty of sun and heat. At least with other resins with harder you know you won’t have smells lingering around when cured. I must have a drop of it somewhere on my floor!😩
Supaclay
2025-02-16 17:49:30
Very easy to work with. I made some custom door speakers panels. Used it in my backyard in the shade then out in the sun light for 3-5 mins and it was good to go. I grabbed some thicker chop mat from Amazon too. I’m done using 3M fiberglass stuff
robert boyle
2025-01-06 13:20:51
Works ok.......If you plan on doing anything other then a small project make sure to order alot....doesn't go very far!
Recommended Products
$39.99
$ 17 .99 $17.99