Your cart is empty.
Your cart is empty.Size:500mL | Style:Isopropanol Size:500mL | Style:Isopropanol Yellow Isopropanol, 4-Color Wash Bottle - Right-to-Know, Safety-Labeled, Wide-Mouth, (bag of 4) Low-Density Polyethylene/Polypropylene 500ml (16oz) Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2”) for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and suggested protective clothing and equipment. Leak-proof, these translucent* LDPE bottles have color-coded polypropylene closures to aid in quick and easy identification. Research, industrial and healthcare professionals rely on SP Scienceware for their sample handling needs. Sold worldwide, Bel-Art and H-B Instrument brand laboratory supplies include over 5,000 items from safety wash bottles to fume hoods, thermometers, racks, desiccators, hydrometers, ice buckets, scoops and spoons. Custom calibration services, plastic molding, specialty coatings and wire manufacturing are also available. Wilmad-LabGlass brand laboratory glassware complements Bel-Art and H-B Instrument with over 7000 items including NMR and EPR consumables and specialty glassware, as well as custom fabrication for individual glassware, glass repair services and OEM glass parts. SP Scienceware is a division of Warminster, PA based SP Industries which also include SP Scientific laboratory, thermal management, and pharmaceutical production equipment and SP Ableware aids for daily living.
RSC
July 23, 2025
I was tired of using squeeze bottles from Walmart and Hobby Lobby for my common solvents like rubbing alcohol, Kerosene and light machine oil in my shop that kept leaking or even popping lid causing mess. I was looking for more robust dispensers that are resistant to solvents and yet are tight to hold these fluids from leaking. I knew I could use "Reagent"grade squeeze bottles that are common in laboratory use but they are usually expensive. I found these to be just the right price point for the quality and utility in the shop or for household use. They are reagent grade made from LDPE (same as your Ketchup or syrup) with a molded spout on the lid. The lid and the body have good deep threads and lock tightly to prevent leaks. There is a long "draw" tube that allows the liquid to be dispensed even when it is held upright and almost to the bottom. Has nice white label strip to mark and label your item including the OSHA-HMIS (Hazardous Material Identification System) labeling.Just a tip to prevent the liquids that have high vapor pressure (low boiling) from coming out of the spout due to expansion in hot weather, just make a pin-hole in the lid using a hot sewing needle or a thin nail tip (make sure there is no flammable liquids inside) before you fill the bottle. This will allow natural venting without impeding the dispensing. Make sure the hole is very tiny and at a convenient location where you can close it with your finger when squeeze. You can also adjust the amount of flow through the nozzle by expanding the orifice at the tip using the hot nail technique. Do not make a large hole as this will allow too much liquid to gush out.Overall this is the best solvent holding and dispensing bottles outside high priced bottles from Fisher and other scientific supply houses.
D. Porrey
July 9, 2025
What you think of this product may depend on how you use it. I purchased this to have a small water bottle next to my soldering iron to wet the sponge whenever I use it. The sponge dries out between uses and taking it to the sink every-time was a pain.The plastic is thick and feels sturdy. I like the overall quality. I also like that I could trim the end of the tube to control the water flow when squeezed. I was able to dial that in perfectly.
Luis
May 31, 2025
Tal cual a la descripción
Zander Bowen
May 13, 2025
Worked perfectly with anohydrus acetone. Would buy again if needed. 10/10
W.B.
April 18, 2025
These bottles are great. I use them to water my plants. I just snipped off the tip of a few of them to get better flow. The only real issue I have with these is the markings that come on this are a joke. They come off simply by holding the container in my hand. I always have flakes of the printing on my hands after use.
M. Frazier
January 11, 2025
I love the concept of this bottle, but after one use, it just drips, and drips, and drips, and drips (you get the idea.) It wastes so much that it is not cost effective to justify using this over a factory can. The only way to stop the drip is to remove the top, and evacuate the straw (which wastes about an ounce of liquid each time.)I'm really disappointed. I purchased a less expensive version of this bottle, and it works far more efficiently.
Brackenwood
December 25, 2024
May have to heat tip to bend it up a little and prevent leaks, otherwise, baller
Joseph
December 1, 2024
The kids do not completely seal up. They work for what I use them for.
Recommended Products
