Your cart is empty.
Your cart is empty.John
2025-09-04 14:26:16
works great and like the clamping jaws on two separate dimensions depending on if you're installing in-vehicle vs out.
John Rushing
2025-08-12 17:23:36
There's not much that can go wrong with these pliers. When I got them I didn't know what the hole in the top was for and then I found out I can crimp the hose clamps using the side of the pliers also. This has come in very handy when I didn't have much room to get the pliers on the clamp.
Mike
2025-08-09 12:55:47
Works as it should
G. Harder
2025-08-06 13:58:34
Glad I hot this type of ear clamp crimper. The clamp was in a tight space and I needed to use the side of the tool. The quality of the tool also appears good
Donald Klein
2025-07-26 20:36:52
Exactly what I needed. Works very well even in tight space with the different options of clamping points it offers
Paul
2025-07-20 11:18:06
Worked great! Would buy again
A. Lai
2025-05-08 20:23:50
These ear clamp pliers will help you get the job done - I like the price and the fact that it can pinch from the top or the side. The metal used is sturdy, BUT the quality of the finish is not great. There were a few burrs that would definitely cause some nasty scratches to your hand if you brushed against it wrong. They could be buffed out, but why should I need to do this on a brand new set of pliers? Also the cut of the side pinch jaws is not very good - they should be angled slightly to allow the clamp to be crimped evenly. Instead, they leave the crimp tight on one side and loose on the other.I ended up returning these pliers and upgrading to the more expensive German built ones. I was happy to pay the price difference for a better finished tool. But if you are price sensitive - the Speedwox pliers are certainly good enough to help you get the job done.
dougiefresh
2025-03-24 17:02:57
This is a good quality wrench for half the cost of the Knipex. Purchased for ss crimp rings on fuel & oil lines for the motorcycles. Also will use on PEX plumbing system for the house and RV.Some comments about machining made me hesitate, but there's always Amazon returns. :-)See the photos. The machining was as good as it gets...in China. This model was done really well. It looks like the front jaw of crimper has small gap, but it doesn't. Front jaw is a little thicker to cut nails off. The jaw still comes together tight.Definitely recommend.
Valentin
2024-12-25 12:35:54
Ok .Cumple con su propósito .Un saludo
Armando Ruiz
2024-12-22 12:11:27
Funciona excelente
Pascal Gélinas
2024-11-29 18:24:06
Parfait
SW
2024-11-25 18:58:02
Siehe Fotos, tolle Zange. Mein Exemplar ist kein Fehlguss oder schief oder dergleichen wie sich in anderen Rezensionen darüber beschwert worden ist. Die Zange kann es meiner Meinung nach mit doppelt so teurer Markenware aufnehmen. TOP
Perea
2024-11-13 21:57:54
Gute Verarbeitung Griffe sind rutschfest auch die Verarbeitung ist super für diesen Preis
Recommended Products