Your cart is empty.
Your cart is empty.Johnny Jawbone
2025-08-19 10:57:44
Before you begin reading this, get your head out of the gutter. :) The other thing: I have some electronics experience with amps i.e. soldering, changing tubes, replacing transformers, etc. IF YOU DO NOT HAVE THIS EXPERIENCE, DO NOT and I repeat DO NOT touch, open or fuss with the guts of an amp. You could be seriously injured or worse. You have been warned.For any guitarist that have had a passing thought about, or even come close to a 1/4 inch headphone adapter falling apart inside a headphone jack or instrument jack, anything you use for sound, get these. I had a 1/4 inch adapter fall apart inside my Revv G20's headphone jack. I did my very best to stay calm... I was able to pull out some of the adapter's parts with what I had on hand but the frigging tip of the headphone adapter was locked in place by the part that locks the connection for the jack. Those that have taken apart guitars and amps will know what I mean by all that.I could not get the tip out with what I had on hand. This is a testament to Revv Amplification and the parts they use. They will work and work well. To be clear though, this matter is no fault of theirs. Not at all. It was caused by the shoddy quality of the adapter sent with a part of Aud!o-T3nicha headphones purchased elsewhere. I contacted Revv support who recommended getting an extended pair of needle nose pliers to see if I could work the tip out of the locking mechanism. They had to be small yet long enough to get deep enough and still open enough to grab the tip. Here's another reason Revv Amps are frigging killer. If it came down to it, they offered to arrange something for the amp to be repaired due to certain personal circumstances. I digress.Once I received the extended needle nose pliers (from here on referred to as EXTNNP), I went to work. I had to keep the little pressure plate down while getting deep enough into the jack to pull the tip out. The EXTNNPs did not have enough room to open. BUT!!!! The alternative was to get the EXTNNPs inside the tip. I had had some success getting the tip pulled towards the opening. At this point, I worked the pliers into the tip, opened the EXTNNPs while in place and successfully pulled out the tip!!! HOOZAH for the shop keep and HOOZAH to these pliers!This got way longer than I wanted but hopefully it was informative and entertaining. I will end by saying this is a must have tool for any roadie or guitar player. These will save your soul and sanity when you run into a problem like mine. As the saying goes: it's better to have it and not need it than to need it and not have it.Keep practicing, keep playing and feel the noise.Fin.
JEFFREY D TAYLOR
2025-07-30 17:17:07
Just floored at the quality of the product and my overall order. Well done!
Troy, just troy.
2025-07-17 21:26:56
These are nice and long for reach but they're not super sharp. They cut through simple 16 ga solid copper wire with more of a crushing separation than a shaved cutting. I suppose they can be sharpened but haven't delved into that.These will work and cut wire where most others can't reach which makes them useful and worth the purchase price, just don't get them if you are used to and expect performance similar to "Good" name brand (aka spendy) tools like Knipex.
Kindle Customer
2025-06-18 18:03:29
Haven't used them yet but these pliers will be excellent for fine jewelry repair .
Phoenix
2025-05-17 10:24:04
I do big Lego builds and I am a fan of adding a lot of texture and detail. Sometimes you fingers just can't get into tighter spaces or if you can, not without knocking other stuff over. These long needle nose pliers work just right for placing thin small lego like grass blades, tree and plant parts, flowers, and whatnot. The handle has a nice hand feel and great grip so if you have hand based dysfunctions like me, these let you keep building with modified independence!!EDIT- Here is a Tip: Grab a jar of "Tool Magic" to dip the tip of these pliers in (3 hrs to dry) to protect the surface of your bricks or beading wires from any potential tool marks too! It peels off the pliers w/o leaving behind any reside on the pliers too!
TexasTaxMan
2025-05-13 11:42:10
Needed for reaching into those tight spaces where normal pliers just won't work. These are great, especially with the long nose, can reach into those narrow tight spaces for screws, etc. Thanks loads!
rithemking
2025-04-26 13:18:18
First attempt (immediate upon opening packaging) the pliers stuck shut and had to be manually opened. Repeated a couple times and then went looking for lubricant. After spraying with silicone the pliers now open back up on their own, but the lubricant coming back out of the hinge is rusty.Hinge is so poorly fabricated that it doesn't completely open, and when shut the nose leaves a visible gap.3 stars because they can "kind of be useful."NOT something I would have imagined paying full price for when I left home for college decades ago.
Luigi C.
2025-04-05 16:47:08
I bought these pliers for a small home project, and I am very satisfied with them. Very good price and quality, besides you are not going to find them anywhere else. Quick delivery!!!
Bra!
2025-03-22 15:19:45
Bra när man inte kommer åt
Cliente
2025-03-18 12:04:08
Alla prima graffetta sie già rovinato il dente (de bruuuutto). Neanche gratis la voglio più. Sconsigliato assolutamente. Soldi buttati
Cuvellier
2025-03-09 18:52:31
très bonne petite pince. coupante.
vladimirototal
2025-01-18 12:40:59
Producto versátil
sara
2025-01-13 15:46:09
La punta è di fattura molto imprecisa, i due lati sono diversi. Non consigliato
Recommended Products