Your cart is empty.
Your cart is empty.Product Description
michael l crisler
July 22, 2025
Having the grit size printed inside the sleeve is very helpful.
CCJ
July 18, 2025
I have a floor standing drill press with three fee of table height adjustment... so no issues with clearance. I run the drum art 1450RPM and the drum sanding sleeves seem to work just fine at that speed. The smaller the diameter sleeves wear quickly... but that is to be expected.
EG
June 25, 2025
Seems to be ok so far
Thomas
April 26, 2025
I used these to remove some scratches and ridges on the inside of my adjustable kettlebells' handles. The smallest spindle fits perfectly in the elbow of the handle.Swapping rolls is easy. The bolts on the top and bottom of the spindle retaining the sandpaper rolls hand be removed and attached by hand easily. I did not have any problems with anything coming loose or slipping when using it. They even include washers which is a nice added touch.There are two spare replacement rolls for each spindle size. The rolls have very consistent grit and feel solidly constructed.
Milo
December 18, 2024
This is a good sanding drum set, and they include a few of sleeves for each size in different grits, 80, 120 and 240. These are pretty useful grits for woodworking. They held up well, and each sleeve is marked with its grit for easy identification. The length of the drum seems to be unusual though at 4.5". I haven't seen any sleeves sold in that size, but you can never have too many sized drums because you never know what you'll be able to obtain since there doesn't appear to be a standard once you get past 1" or 2". The held up fine, and worked well on my benchtop drill press.
Recommended Products