Your cart is empty.
Your cart is empty.For field installation, use this Square D by Schneider Electric Neutral Lug. It is compatible with aluminum #12 - 2 or copper wire #14 - 4. It has both a UL listing and ANSI certification.
Grant Oesch
2025-09-04 19:54:36
Great option for when your adding a sub panel and need a larger lug on your neutral bar. Also good when you have to increase neutral conductor size for voltage drop.
Jane Himes
2025-08-23 14:05:34
Worked great, I needed a #6 neutral in a square D box, with no lugs that size avalible. This fits in 2 of the smaller (#10) holes on the bus bar and provides the larger lug I needed.
Tom Lockwood
2025-07-29 14:59:16
This was exactly what I needed to add another large gauge ground cable to my service panel. In this case I was adding a 100 amp feed from my garage to a second garage I was building. Worked perfectly and kept me from having to screw around to get it wired. Perfect!
Nathan S.
2025-07-12 11:40:14
Great product and price
Monkle124
2025-06-19 13:00:51
Most neutral or grounding buses are vertical and so the wires run up and down in the box. The hole with set screw is oriented in the wrong direction causing major headaches to install a large solid grounding wire. It’s in the pile of useless and I hade to buy a different connector.
BS6
2025-03-22 10:44:49
This part was supposed to be be able to allow a #4 conductor to land on a neutral bar with #10 sized terminals. But what was sent to me was a 4 terminal neutralbar as shown by the picture. It appears to be the wrong part in the correct package. Will return not what I needed
Gerry A.
2025-02-15 16:31:21
Square D products are reliable and are of great quality. I am leaving a one start review because this item in not as pictured. I wanted this because it bolt onto the ground/neutral bar. Instead this has a double prong fork that slides into it. Still would work but this is not what I wanted.
Recommended Products
