Your cart is empty.
Your cart is empty.You’re all about earning sweat equity, but to be efficient on the job, you need equipment that will work as hard as you. Good thing the STEELMAN WS-077 Contractor Miter Saw Workstation always outperforms its competitors. Constructed of high-grade and corrosion-resistant, powder-coated steel, this stand has a 500 pound weight capacity and the adjustable tool mount brackets work with most brands of miter saws and other bench-top tools. The tool mounts have a sliding rail that lets you adjust the center of gravity of any mounted tool and create a steady foundation while cutting. The tubular, powder-coated steel legs are capped for use on finished surfaces and have quick-release levers for easy setup and take-down. One pair of legs feature fold-down storage brackets that can hold a variety of builder materials. The top width adjusts from 35-inches to 77-inches, allowing for an extensive workload. There's a convenient carrying handle and sturdy wheels that make transporting this workstation effortless. STEELMAN is an industry leader in automotive and industrial specialty tools and equipment, manufacturing the highest quality, unique, and innovative tools and products, designed to meet the specific needs of mechanics, contractors, and other working professionals.
Jeremy
2025-08-30 12:07:08
This came in to hold and support my husband's saw. It was super easy to put together and has very convenient wheels to help move around. Heavy duty and heavy! But the wheels make it so easily movable without much effort. Love this!
GEA
2025-08-24 13:55:33
Like robotecks (see his review), I just received my stand with the same pieces missing. No MA-0116 (longer) mounting brackets, and no outlets included (even tho there is an opening in the end of the stand to accommodate them). The stand is unusable and will need to be returned if not corrected.Update 8/26/2017: Have worked with Protocol representative (Lindsey) with all concerns addressed, and parts replaced. In the end, it is an excellent stand and supports my 12" Ryobi compound sliding miter saw very nicely. Several of the threaded holes were a bit coarse (not milled well) which created minor damage to the thread on a knob handle, but that was replaced immediately. The electrical outlet is only available on the professional model, but after having used the stand, it would have little use anyway.To address another comment, the legs next to the wheels can be stored first so stand can be wheeled with saw attached, but it's easier to remove a heavy power tool (mine weighs close to 40#). If you have a relatively smooth floor, cupped furniture sliders work quite well.Overall, it is a very good stand at a good price with excellent customer service.
Mick
2025-08-04 17:24:38
Very nice small portable stand. I put my DeWalt 12" compound saw on it and it's great. I like the wheels and it makes moving it around nice. I'm a contractor and have been using this for a couple months now and it's holding up just fine. Also, this stand has the same size rails as a ryobi, so we can interchange our saws if need be.
Steven Orville Johnson
2025-07-29 12:03:37
Arrived with a clamp on the saw mount broken, also the side rollers aren't rollers just tube solid in place which would be okay if they didn't tip slightly to the side at about 10° with no way to correct.
edmocon
2025-07-22 18:01:31
I am a contractor and first I want to say that I got rid of my 12 inch sliding mitre saw and purchased a cordless 7.25 sliding mitre saw and got this stand. It is a really nice stand and has quite a few good features the best being how compact it is. It is very sturdy and really my only complaint is it is very heavy like as heavy as the really long yellow and black ones. I was going for size in the back of my truck and so it does the job but it is heavy.
DS
2025-07-16 18:53:06
Plenty of steel, but not enough quality. I bought a dewalt table saw stand for same price that was much better quality. I Wish that dewalt made this style of miter saw stand. Legs stress the frame when they fold and don’t fit in the cavity without bending. One lock doesn’t engage. Cheap wheels and retainer clips. Won’t stand upright with saw installed. Work support arms weak and sloppy fit.
Duane Linstrom
2025-07-02 14:06:47
But I didn't need it. I was captivated by the photo of the wheel on the unit. I had visions of wheeling my saw from place to place as needed. It doesn't work like that. I have to take the saw off, fold up the apparatus, and carry it to where I want it to go. My old saw-stand would do that. This station is easier to unhitch from the saw than my old one, but that's a minor convenience. But this has chrome wood holders, snappy looking red trim, gray powder coated main body. It looks nice on the job, so I'll keep it.
Daniel C Cruz
2025-06-27 14:57:22
Just right for construction use.
Gloria Hart
2025-06-14 13:33:51
Very well made and heavyduty
Angel Leonardo Cámara Caballero
2025-06-05 13:19:29
Es una base muy fuerte y de buena calidad. Pará la sierra de inglete dw780 ni mandada hacer. Yo en lo particular muy satisfecho.
Kenneth webster
2025-06-02 17:17:34
The whole package was damaged, parts broken, and the wheel bracket did not fit, called the manufacturer and was told no available parts, just send it back to amazon
iusconoclasta
2025-05-28 18:55:11
TenÃa dudas porque en México Protocol no es una marca conocida. Sin embargo, al ver el producto inmediatamente me di cuenta que es de buena calidad. Se siente robusto, fuerte y con mucha firmeza para cargar mi sierra de inglete Milwaukee.También la ocupo para mi sierra de corte o chop saw Makita (para corte de metales) y la soporta muy bien. Eso sÃ, tuve que adquirir la mesa o plato que vende por separado Protocol para ajustar otro tipo de sierras o incluso cepilladoras.Es fácil de ensamblar, transportar y guardar, pues una vez que lo doblas lo puedes poner hasta debajo de la cama.Le he quitado una estrella principalmente porque sólo te permite hacer cortes repetidos en material de hasta 2m de largo (77in). Puedes cortar material más largo, pero para cada corte tendrás que medir. Ahora bien, quizá parezca injusto porque esto es algo que advierte la marca y, para ello, ofrece otra mesa para cortes de hasta 3.10m (124in). Pero creo que en vez de haber dos productos, deberÃa ser sólo uno y con la posibilidad de poner la extensión para pasar de 77in a 124in. Si hubiera estado disponible en México la de 124in, seguramente la hubiera preferido en lugar de esta de 77in.
Stéphane
2025-05-10 17:34:47
Je croyait que c'était de calité, je suis vrement déçu ☹
Jeremy
2025-05-09 15:24:53
This came in to hold and support my husband's saw. It was super easy to put together and has very convenient wheels to help move around. Heavy duty and heavy! But the wheels make it so easily movable without much effort. Love this!
GEA
2025-04-16 11:51:41
Like robotecks (see his review), I just received my stand with the same pieces missing. No MA-0116 (longer) mounting brackets, and no outlets included (even tho there is an opening in the end of the stand to accommodate them). The stand is unusable and will need to be returned if not corrected.Update 8/26/2017: Have worked with Protocol representative (Lindsey) with all concerns addressed, and parts replaced. In the end, it is an excellent stand and supports my 12" Ryobi compound sliding miter saw very nicely. Several of the threaded holes were a bit coarse (not milled well) which created minor damage to the thread on a knob handle, but that was replaced immediately. The electrical outlet is only available on the professional model, but after having used the stand, it would have little use anyway.To address another comment, the legs next to the wheels can be stored first so stand can be wheeled with saw attached, but it's easier to remove a heavy power tool (mine weighs close to 40#). If you have a relatively smooth floor, cupped furniture sliders work quite well.Overall, it is a very good stand at a good price with excellent customer service.
Mick
2025-04-01 13:07:36
Very nice small portable stand. I put my DeWalt 12" compound saw on it and it's great. I like the wheels and it makes moving it around nice. I'm a contractor and have been using this for a couple months now and it's holding up just fine. Also, this stand has the same size rails as a ryobi, so we can interchange our saws if need be.
Steven Orville Johnson
2025-03-05 11:17:09
Arrived with a clamp on the saw mount broken, also the side rollers aren't rollers just tube solid in place which would be okay if they didn't tip slightly to the side at about 10° with no way to correct.
edmocon
2025-02-27 21:58:29
I am a contractor and first I want to say that I got rid of my 12 inch sliding mitre saw and purchased a cordless 7.25 sliding mitre saw and got this stand. It is a really nice stand and has quite a few good features the best being how compact it is. It is very sturdy and really my only complaint is it is very heavy like as heavy as the really long yellow and black ones. I was going for size in the back of my truck and so it does the job but it is heavy.
DS
2025-02-07 12:51:26
Plenty of steel, but not enough quality. I bought a dewalt table saw stand for same price that was much better quality. I Wish that dewalt made this style of miter saw stand. Legs stress the frame when they fold and don’t fit in the cavity without bending. One lock doesn’t engage. Cheap wheels and retainer clips. Won’t stand upright with saw installed. Work support arms weak and sloppy fit.
Duane Linstrom
2025-02-05 16:29:49
But I didn't need it. I was captivated by the photo of the wheel on the unit. I had visions of wheeling my saw from place to place as needed. It doesn't work like that. I have to take the saw off, fold up the apparatus, and carry it to where I want it to go. My old saw-stand would do that. This station is easier to unhitch from the saw than my old one, but that's a minor convenience. But this has chrome wood holders, snappy looking red trim, gray powder coated main body. It looks nice on the job, so I'll keep it.
Daniel C Cruz
2025-02-02 15:58:53
Just right for construction use.
Gloria Hart
2025-01-22 15:17:27
Very well made and heavyduty
Angel Leonardo Cámara Caballero
2025-01-16 12:21:37
Es una base muy fuerte y de buena calidad. Pará la sierra de inglete dw780 ni mandada hacer. Yo en lo particular muy satisfecho.
Kenneth webster
2024-12-10 15:04:36
The whole package was damaged, parts broken, and the wheel bracket did not fit, called the manufacturer and was told no available parts, just send it back to amazon
iusconoclasta
2024-12-02 11:56:20
TenÃa dudas porque en México Protocol no es una marca conocida. Sin embargo, al ver el producto inmediatamente me di cuenta que es de buena calidad. Se siente robusto, fuerte y con mucha firmeza para cargar mi sierra de inglete Milwaukee.También la ocupo para mi sierra de corte o chop saw Makita (para corte de metales) y la soporta muy bien. Eso sÃ, tuve que adquirir la mesa o plato que vende por separado Protocol para ajustar otro tipo de sierras o incluso cepilladoras.Es fácil de ensamblar, transportar y guardar, pues una vez que lo doblas lo puedes poner hasta debajo de la cama.Le he quitado una estrella principalmente porque sólo te permite hacer cortes repetidos en material de hasta 2m de largo (77in). Puedes cortar material más largo, pero para cada corte tendrás que medir. Ahora bien, quizá parezca injusto porque esto es algo que advierte la marca y, para ello, ofrece otra mesa para cortes de hasta 3.10m (124in). Pero creo que en vez de haber dos productos, deberÃa ser sólo uno y con la posibilidad de poner la extensión para pasar de 77in a 124in. Si hubiera estado disponible en México la de 124in, seguramente la hubiera preferido en lugar de esta de 77in.
Stéphane
2024-11-15 11:10:27
Je croyait que c'était de calité, je suis vrement déçu ☹
Recommended Products
$89.03
$ 39 .99 $39.99
$119.99
$ 52 .99 $52.99