Your cart is empty.
Your cart is empty.Product Description
Simple & Effective
The Cinch was designed for one purpose, to hang your snowboard on the wall for a beautiful display. It's set of rubber bumpers can be spaced to fit your board's width and grip your board's edges to hold in place. No frills, just a great look!
Floating Minimalist Design
It's ultra-slim design show off your snowboard, not the rack. Perfect for displaying boards with sharp graphics and designs. Hang up one snowboard or order multiple mounts to show off your entire arsenal of snowboards!
Easy Storage Solution
Use the Cinch to mount your snowboards in your home, garage, or resort home for easy-access storage. Have your boards organized and ready to go by the door for your next trip to the slopes!
Sleek Indoor Display
Display your favorite snowboards in your home, office, apartment, dorm room, or ski shop! Your snowboard adds that personal touch for a decorative addition to any room to show off your snowboard obsession
About StoreYourBoard
- The most trusted name in the industry for organizing your outdoor adventure gear!
- Headquartered in Charlottesville, VA
- Since 2009, we have designed and developed innovative solutions to store your snowboards, skis, skateboards, longboards, surfboards, kayaks, paddleboards, bikes, wakeboards, skateboards, canoes, fishing rods, tools, and more!
- Our mission is to optimize your storage space while protecting your gear from excess wear and tear. From our first Scorpion Wall Rack designed in our founder's basement, we have now grown to become the most trusted name for outdoor adventurers around the world!
- Free up space in your home, garage, or retail shop and have your gear ready to go for your next trip!
Margaux
2025-09-05 18:07:54
If you have snowboards/skis or skateboards, you NEED these! I have purchased twice now and LOVE them! I have since added another snowboard (not pictured) and will be buying more for my skis. I put rubber mats from IKEA to catch water that drips off, as these are in my living room. These are SO easy to use once have been installed, just pick up your snowboard and go! Plus, snowboard art is the best kind of art. Just make sure you have a vacuum handy from dust/wall pieces that will fall off in installation. Thank you so much! Cheaper than making your own at home depot (I checked)!
Doug Warren
2025-08-30 16:25:25
Pretty simple yet effective solution to get boards off the floor and on the wall, really just two rubber stoppers spread mounted at the same height and you slide the board down between them. The stoppers give just enough to catch the edge. To remove, you slide the board up to release rather than pull straight out. Just as it looks in photos other have posted. . Mounted on pine so I had no need for drywall anchors and had no problems installing... took 5 minutes. I'll be curious how these hold up over time.update: two years with no deterioration of the rubber, bought two more sets for additional boards.
Greg Goldman
2025-08-09 17:17:58
I've used the "Hang Time" product and that worked excellent!!! Used this for my son's college room to hang his board. Super easy to install. Cheap price, but I guess overpriced when you realize it's a drywall anchor, wood screw and a rubber stand-off. That said it did work as advertised. I like the "Hang Time" better and if I could provide them one suggestion I would use a pan head screw and a metal washer to prevent the tapered wood screw from driving into the rubber stand-off. Anyway, I would buy it again or just buy the "Hang Time." I feel like that's a better product despite costing twice as much. It's a really nice way to store and display your board.
Tiffj535
2025-07-15 21:20:48
Works well... would recommend.
Customer
2025-07-01 18:26:35
I bought two of these. The first pair went in easy, the instructions matched the parts. The second pair, the supplied anchors were different than the first. I had made pilot holes that would fit the original anchors assuming that's what they would be. Be careful about what parts are in the package before you start drilling
Customer
2025-03-07 19:15:01
This wall mount system is a perfect method for storing your board and putting it on display. Outside of getting a board that's the right size and shape for your riding style, your affinity for the design plays a large part of the selection process - so why not share it with people? This mount design is minimalistic and doesn't take away from the aesthetics of your board. It's very easy to install - I used a tape, laser level, pencil and drill but that was probably overkill. The wall anchors bore right into the wall and stay securely in place. I inserted the screws into the rubber mounts so that the tip was visible from the other side before fastening to the wall anchors. To me this was the easiest way to ensure proper alignment. My board is on display and there's no worry of it falling off the wall.
Jessica
2025-02-17 17:05:30
Love these things for verticle wall mounting for my boards. Easy installation other than the fact that the drywall anchors provided aren't the best quality. Took like 15 minutes to mount 3 boards and it looks beautiful.
Shannon Murray
2025-02-16 12:32:16
We hung a ton of snowboards on our wall with these and they were perfect! Not very large and made our snowboard collection look organized and easy to access! Love these!
Customer
2025-02-12 15:22:57
Easy to install, minimalist and seems to be strong. Only been up for 1 day but they seem sturdy enough.
Samuel Bisson
2025-02-08 18:12:28
Easy to install and looks clean on my home office wall. Instructions could be better formated, but it's not like we really need them.
Michal Zielinski
2025-01-29 18:37:57
Works great and an easy setup. Need to be carefully when installing the screws in the rubber stops, too much force will cause the screw to go right through.
Suzanne
2024-12-11 12:29:16
Brilliant product. So easy to fit & has gained us loads of room in my son’s room.
Captain
2024-12-08 12:00:01
It does what it says on the tin, but very expensive for what you get… doubt it would cost more than £1 for all parts received. Would have returned due to being overpriced but it’s not eligible. Lastly, for anyone with solid walls, you will need your own raw plugs, only dry wall/plasterboard fittings come in the kit.
Recommended Products