Your cart is empty.
Your cart is empty.Product Description
234715 (WB30M2)
RANGE SURFACE ELEMENT
SPECIFICATIONS:
- 8"
- 5 Turns
- 208V/1765W ; 240V/2350W
Stove Burner have been upgraded !
*Tube ends sealing process:
Ours: we use the Teflon to seal, it can completely seal the tube ends well to avoid the moisture get in, this not only improves safety, but also avoids leakage caused by dampness when not used for a long time.
Others in market: sealing material used by silicion cap, it can prevent the short circuit when the cold pin is bent and touched with the tube, but the disadvantage is no moisture-proof effect, normally called it fake sealing processs
*Brand
Choosing a good brand, is to enjoy better protection of consumer rights and interests, brand merchants will do a better job of after-sales, So we reject unbranded goods
*UL/ETL:
For such this electrical products, it must pass the basic certifications, American Markets required this product must be UL/ETL approved .For your safety, be sure to choose the burner with UL/ETL. .Our burners are all UL/ETL certified, Can be assured to purchase.
234715 (WB30M2) DIMENSIONS : PLEASE MAKE SURE TO CHECK THE DIMENSIONS BEFORE BUYING! (UNIT: MM)
234715 (WB30M2) REPLACEMENT PART NUMBER & COMPATIBLE BRANDS
- REPLACE NUMBER: TOP-HEATER Electric Range Surface Burner 234715 replaces : YCH30M2, CH30M2, AP2634728, 2797, 340524, AH243868, EA243868, PS243868, WB30K5027, WB30M0002, WB30X5072, WB30X5120, WB30X5122, WB30X5130, B003BNZ4Z4, etc.
- COMPATIBLE MODELS: JMP28GR3AD, JBP80WS1, JMP29GT1BB, JMS08GR2AD, JMP28GT1WH, JSP28GT1BB, JSS16P2WH, JBC16G*R2, JBC16G*R3, JBC17G*R3, JBC17GS1, JBP20GS1, JBP22*R3, JBP22G*R3, JBP22GES1, JBP24G*R3, JBP25G*R3, JBP26G*R3, JBP27G*R3, JBP28G*R3, JBP45AS1, JBP45G*R3, JBP45GS1, JBP45WS1, JBP48GS1, JBP48GS2, JBP55G*R3, RB502S1WH RB502S2WH RB632GS1 RB632GS2 RB632GV1 RB632GW1 RB632GW2 RB633GV1 RB636*F4 RB636*J1 RB636*J2 RB636*N1 RB737*J1 RB737*J2 RB737*J3 RB737*J4 , 36342482200 36342482201 36342489200 36342489201 36343482200 36343482201 36343489201 3639878911KS 9119851190 9119851191 9119851192,etc.
- Matching 6" Electric Stove Burner Element WB30M1, which can be replaced by 234710, 2637, AH244055, EA244055, PM30X0120, PM30X120, PS244055, WB30X0359, WB30X359, WB30X359R,etc.
- Compatible Brands: GE, Hotpoint, Ken-more etc .
EASY TO INSTALL WITHOUT TOOLS
INSTALLATION TIPS
For a few cooktops or stoves, the coil surface element may not be stable sitting on the drip-pan. In this case, you should make the prong heads are parallel and push a bit down 2~5mm to stabilize the top surface element.
- Make both prong heads are parallel
- Bend down both prong heads for 2~5mm
234715 (WB30M2) 8'' SURFACE BURNER ELEMENT
Simple Installation , No Tools Required
Our product is an easy-to-install plug-in element that can directly replace for most stoves in USA. The installation steps are as followed :
- Turn off all range elements power. Make sure all stove dials remain in the OFF position during the installation.
- Wear work gloves,remove the existing range elements from the stove manually.
- Plug each surface element into its size appropriate location on the stovetop.
- Protect your hands. After the power is turned on,do not touch the element during the test.
- Universal 8" surface range element
- Y type bracket
- Rigorous processing technology
- Stainless steel 321 premium material
- UL certification with higher safety
STAINLESS STEEL 321 PIPE MATERIAL
234715 (WB30M2) electric range burner element is made of stainless steel 321. Compared with stainless steel 304, stainless steel 321 is added the composition of titanium, which has higher temperature resistance, stronger oxidation resistance, better wear resistance and lower deformation during electric stove burners working. Moreover, the service life of stainless steel 321 pipe will be longer than that of the stainless steel 304 pipe.
ADVANCED NEW SEALING PROCESS
OLD SEALING PROCESS
The range elements of old seal process can not ensure higher safety and quality.The old seal process is a technology 10 years ago,in fact,the end of heating element is not sealed. If the range elements are not used for a long time,it’s easy to cause leakage and shorten the service life. Therefore, many manufacturers will not use the old seal process to produce heating elements,but adopt a new seal process to ensure that the products have better quality and higher safety.
- Low security
- Easy to cause leakage
- Shorten the service life
ADVANCED NEW SEALING PROCESS
Sealed with Teflon caps and shrinking at the two ends of tubular heating element
Our range element adopts new seal process which is sealed with Teflon caps and shrinking at the two ends.Compared with the old seal process, which is sealed with silicone caps and without shrinking, the new seal process ensures surface element a longer service life,improves safety and avoids the leakage caused by damp though it’s not used for a long time.
- High security
- Avoiding the leakage caused by damp if the surface burner element doesn't work for a long time
- Improve the service life
UL APPROVED
Most of our heating elements have passed UL certification, fully complying with the electrical safety standards of the U.S. market. As a professional manufacturer with more than 30 years of experience in the electric heating element industry, we TOP-HEATER have manufactured a large number of products to North America according to the requirements of different customers, and are highly recognized by customers for providing high-quality products.
Diane F.
2025-07-22 17:23:44
Was hard to put in but managed to get it to fit. So far it works great1
ashley
2025-05-28 10:42:50
One of my burns blew and had to get a new one fast and it came on time and fit great.
Betty L. Davidson
2025-05-02 12:05:53
I was very happy to find these burners available from Amazon because I was very unhappy with the new Sensor burners that came with my new kitchen range. These sensor burners are very poorly made and they turn off whenever they decide to and you find that food that was supposed to be cooked is not done because the burner turned itself off!!!.
FRANCISCO M. PALOMO
2025-04-27 14:44:31
Did not fit for my stove burnner (Hotpoint) had to send it back
SAD
2025-03-26 12:04:38
It works perfectly with my stove. It came very quickly also. Awesome experience.
Love it!
2025-02-12 13:35:25
This item was perfect and shipped fast but it would not fit my cook top . Had to return.
Jose mejia
2025-01-07 21:38:35
We like it the way is made this part and fit proper and I recommend a 100%
jafet Nunez
2024-12-27 11:50:22
Used to replace a GE complicated heater, bought a few month ago, still working.... hope it keep it that way
ben
2024-12-18 15:40:02
Product quality is a little bit low compared with the price, but works fine, hope it can last long enough.
Always experimenting with new products
2024-11-26 11:51:17
Delivery service fast. And was perfectly packaged. It’s the correct size for the stove but didn’t fit correctly. Will have to make some adjustments. To level the element.
Recommended Products
$74.75
$ 35 .99 $35.99