Your cart is empty.
Your cart is empty.Product Description
Ihdr
2025-09-05 17:28:46
Did the job perfectly! I read a few horror stories about people messing up their crankshafts! Not with this tool you won't!!
jeff
2025-09-04 16:55:09
Fit my can am renegade 2019 xmr worked great and didn’t break like from what I hear happens to most of them
silllo
2025-08-11 14:17:28
Does not fit 2018+ Outlander models. The tool head is way too big to fit in the 8mm hole in the clutch. Called company as directed by Amazon, and was told it was not their problem. Apparently this Amazon does not need to be accurate in their product description. Also, they do not honor their return policy. When asked for the agent's name, they pretended to not hear anything over the phone. Avoid.
Big_D
2025-07-17 13:54:18
I used this to remove the inner primary sheave on a ‘13 Outlander 650 XMR... worked great! After removing the outer primary, spring and one way bearing, I threaded the tool in by hand until it stopped and then hit it a few times with an impact. Inner sheave popped just like it should!
WadeR B.
2025-07-14 12:24:58
Works great on a 2007 Can am Outlander 800xt for removing the rear primary clutch assembly.
Kyle
2025-04-19 20:07:42
Pulled the clutches on my outty 1000 no issues. No stripping Works good enough
mike
2025-02-01 13:35:08
It worked but I had to put grease in the hole first to create like a hydro press cause my clutch was on tight
Dylan armstrong
2025-01-24 11:39:57
Same quality as the cheaper ones. Came in with no box and rusted. Looks used. Save some money and get away from these.
Recommended Products
$23.88
$ 11 .99 $11.99