Your cart is empty.
Your cart is empty.Product Description
Suspenz SUP and Surfboard Storage Rack
KEEPING YOUR GEAR ACTION READY
The Suspenz SUP and Surfboard Storage Rack gives your board the royal treatment it deserves! This rack stores your board on a strap on its side so it never touches a hard surface for the ultimate in protection. Its powder-coated steel frame is designed for both indoor and outdoor use with safety straps to securely hold your board in place.
What's in the box?
- 2 SUP Racks with Straps
- Wall Mounting Hardware
*If you are missing any parts or need replacements, reach out to us directly and we will assist you from our Atlanta office.
Key Features
Available in Marine Grade Black!
Marine Grade Black - Powder-coated steel and stainless-steel hardware. Note: Due to the base material being steel, it will rust in saltwater environments.
Your SUP Never Touches A Hard Surface
Protect your SUP by having it never touch a hard surface! The Suspenz Suspension Strap System eliminates pressure points and protects against hull distortion.
Double the Storage!
Need to store two boards? Join two SUP Racks together with the Suspenz SUP Expansion Plates (sold separately).
Specs:
- Height: 21.5"
- Material: Powder-coated steel frame
- Extends 10.5" from wall
- Board Opening: 8"
- Load Capacity: 100 lbs.
- Indoor and outdoor use
- Safety straps included
Variety of Mounting Options
Hang on a Wall
Get your paddle board or surfboard off the ground. These racks are great space savers and keep your boards stored securely up and out of the way!
Side of Golf Cart
These racks can be mounted to a golf cart using our Quick-Release Brackets (sold separately).
Off the Dock
Keep your boards on the dock using the Over-Water Dock Mount or attached to a railing/posts.
On a Pontoon Boat
Save space inside your pontoon boat and mount these racks on the outside so you can always have your boards with you!
Brett & Kirsten Doherty
2025-08-13 17:13:50
Solid rack! Check out Suspendz for all their other awesome products. They make brackets for their racks that allow you to easily mount/unmount which is what I used for the side of our RV. Pretty awesome setup for fulltiming and getting our boards off the ground. Even though I unmount them for tavel, you could probably drive down the road with the board in the rack they are so sturdy.
J. Frost
2025-05-02 16:57:38
I combined these racks with plastic rail clamps to secure the rack onto the side of a sailboat. This allows me to stow a paddleboard outside the lifelines and off the deck which frees up space and removes obstructions for people making their way on deck as well as sail lines.The racks are well made and there is a drainage hole at the bottom of the U shape so that any water that enters the tubing can escape.I appreciate the strap design which lifts the board off the hard metal rack and suspends it like a hammock. This protects the finish on a nice fiberglass board.
Kim Palmer
2025-03-12 17:16:29
Mounted it on the side of the pontoon boat for my huge 11 ft inflatable paddle board and it works great!
Emily J Vanderipe
2025-03-04 10:10:36
They say this mount fits surfboards but it does not. I got these mounted to the side of my vehicle to hold my surfboard. The straps are way too long and I cannot tighten my board down. Pretty mad Beacuse now there mounted into the side my my vehicle. PLEASE DO NOT BUY IF YOUR WANTING TO USE YOUR SURFBOARD
Clark L.
2025-03-03 18:25:09
I've just purchased my second set of brackets. My first set rusted and fell apart after several years, which was not surprising since I live in the NC coast. The product works great for outside storage, especially in windy conditions. The only complaint I have is that this company, like many others, manufactures a solid and sturdy product, but then supplies inadequate hardware to install it. Even with drilling pilot holes and adding wax to the screws that were supplied, it was difficult installing the supplied screws without damaging them. The company supplies an offset screwdriver, which is a joke, as the size of the phillips driver is much smaller than the size of the phillip head screws that are included. In hindsight, I wish I would have purchased stainless screws for installation as opposed to using the ones provided.
Tom
2025-02-15 15:17:54
Bought to store my wife’s paddle board on our boat dock. It was super easy to install and hold the board firmly and safely.
Jeff
2025-02-13 13:20:57
Perfect fit for pontoon
George Navarro
2024-12-16 21:40:44
This product is made very good and easy to install on my pontoon boat. Great price too.
T. Bohdanetzky
2024-12-03 17:00:36
This is a five star product. It is definitely easy to install, extremely sturdy, and very good value for your money. The company made an error with my order, but they took care of it immediately and in the best way possible, and I cannot say enough good things about their business practices and their products. I would definitely recommend this product from this company, I have already purchased a second rack from this company for my boat because I am so impressed with the product and the company.
Recommended Products