Your cart is empty.
Your cart is empty.Product Description
- Filters Moisture and Particles from the Air.
Product Description
Air Filter Single with Manual Drain Valve
- Port Size:1/4" NPT;Gauge Port: 1/8" NPT
- Material:Aluminum Alloy Body, Strength to Engage in Corrosion Resistance
- Pressure Range:0-150 PSI
- Operating Temperature Range: 40-140F(5-60℃)
- Easy To Use:light Weight, Small Size, Easy Installation And Maintenance.
Product Feature
5 Micron Element
- Equipped with 5 Micron Element, It can Filter out up to 95% of Particles and Moisture in the Air.
Filter Cup
- Transparent Filter Cup Allows You to See the Volume of Water and Oil in the Glass.
- The Capacity of the Cup Must Not Exceed 80%.
Installation Direction
- Pay Attention to the Airflow Direction,And Follow the Arrow on the Pressure Regulator.
Complimentary Accessories
- 1 × Nickel-plated Iron Air Plug and Iron Air Coupler、2 × Male Pipe、1 × Filter Elements、1× Copper Nickel Plated Ball Valve、1× Teflon Tape.
Steps for Replacing Filter Element
Step 1
- Rotate to the Left to Remove the Protective Case and Filter Cup.
Step 2
- Rotate to the Left to Remove the 5 Micron Cartridge for Replacement.
Step 3
- Replace it with the New Filter Element.
Step 4
- Install the Protective Case and Filter Cup Back into Place.
Introduce
Customer
2025-08-12 10:36:36
Installed this next to a machine (I'm installing driers at all machines in my shop). I'm on a quest for the driest cleanest shop air ever.. Hopefully this will never need to catch any water with my new cooling system running, but I know that if moisture does get by, this trap will catch it. It's well made and the filter can't let even moist air through.
S. Andrews
2025-05-31 12:00:22
Installed on one leg of garage PEX style compressed air distribution system.This is on the leg that I use for HVLP gravity sprayers.So far no leaks and I do not expect any. Good volume trap that I can see water after heavy use. That’s good news! It works.
James Williams
2025-05-08 11:35:42
This is a fairly inexpensive air filter with a copper/metal element. It is best suited to eliminating water vapor from the air stream. For oil you usually want a different filter material. I'd pair this with an oil filter if you are using an oil-based compressor.You get a lot of accessories including an on/off valve. These accessories are pretty solid.The unit has decent threading on the input ports and on the main filter chamber. Take the metal guard off and you have easy access to the polymer bowl. The seal is done properly with a gasket, and the threads allow you to really crank it into that gasket. Changing the filter element is easy.
Brian
2025-05-04 11:21:24
I really love this brand/style of air dryer. They are almost all metal instead of the cheaper plastic models. The only thing i have to say about this one that i didnt quite realize upon ordering is it has no air pressure controller or gauge. This is the first out of 15 or so air dryers i have ordered (i have a large paint and other setup) that does not have this stuff. Thats ok though, it will still come in handy.
Ray Metcalf
2025-02-13 18:53:02
Great replacement part, works exactly as described
Anon
2024-12-21 14:12:48
Threads are in spec, no leak at the gasket and it traps moisture. Here in Texas I have no shortage of moisture in the air and having this on the output helps a great deal with keeping condensation out of the hose.And it does help to run this between two regulators. I have the compressor output regulator set to 95 psi and the hose regulator at 75. I still get a little moisture but nothing like I did before.
Recommended Products