Your cart is empty.
Your cart is empty.Product Description
- 3-Stage Filtration System That Combines Regulation and Filtering to Prevent Dust and Moisture from Damaging Pneumatic Tools and Accessories.
Product Description
Triple Aluminum Alloy air Filter with Manual Drain Valve
- Thread Size: The Air Drying System has Two 1/4" NPT Ports and One Gauge Port 1/8" NPT
- Material:Aluminum Alloy Body, Strength to Engage in Corrosion Resistance
- Pressure Range:0-145 PSI
- Operating Temperature Range: 40-140F(5-60℃)
Product Feature
Tips For Replacing Desiccant
- Do I Need To Replace Desiccant Beads?
- In Its Normal State, The Desiccant Bead Is Blue.
- When It Needs To Be Replaced, It Will Change To Red.
Filter Element Change Tips
- Does Filter Elements Need to be Replaced?
- The Normal State And The State When It Needs To Be Replaced Are Shown In The Diagram.
Installation Direction
- Pay Attention to the Airflow Direction,And Follow the Arrow on the Pressure Regulator.
Complimentary Accessories
- 1 × Nickel-plated Iron Air Plug and Iron Air Coupler、2 × 1/4" Male Pipe、2 × Filter Elements （5 Micron Element & 0.01 M）、4 × Desiccant Beads...
Steps for Replacing Filter Element
Step 1
- Rotate to the Left to Remove the Protective Case and Filter Cup.
Step 2
- Rotate to the Left to Remove the 5 Micron Filter Elements and the 0.01 Micron Filter Elements for Replacement.
Step 3
- Replace it with the New Filter Element.
Step 4
- Install the Protective Case and Filter Cup Back into Place.
Justin G
2025-07-13 13:58:23
Not sure what to think about this set up. The pressure gauge hits the tightening ring on the filter body before its seated and air tight. I have seen others complain about this issue. Not sure why manufacturer hasnt fixed this problem but nope. Contacted seller and they did give me a $20 refund to buy a 1/8in npt brass fitting to move the gauge away from the ring. Just dont think I should have to do this step it should work from the factory. Also when I pulled the filter bodies apart to change locations one body had 1/4in npt holes versus the 3/8in npt holes in the other 2 bodies. I wanted 3/8in fittings to get the needed air to my plasma table and its not what I got. Contacted the seller and the response was they are out of stock. Um what is out of stock the correct size filter body. And are you telling me you shipped it knowing it wasnt correct. And does that mean you will send the right one when it is in stock. So right now im not the happiest but will see what happens. At least when I contact the seller I get a response fairly quick just a little hard to make sense of the replies. Update on review. The seller allowed me to keep the system and refunded the purchase price. While i wish they had the correct body I can live with that and they responded quickly with all my questions. Customer service is good. The filter system I got has been installed on my cnc plasma and is working well even with the restricted airflow so Im good with that.
PJS
2025-07-03 13:50:58
I added this to a home shop compressor that does not see a lot of use. I like the 3-stage filter system as it allows for the use with HLVP paint sprayer or a pot sprayer. Getting rid of the water in the air is important. I replaced a another filter with this one.Installed very easily. The threads worked well and all the parts fit.The air regulator seems to be off by 5 to 8 pounds. Which is not an issue as I compensate for the differential, however, it should be accurate.Okay product for the price.
Truth Seer
2025-05-24 15:28:44
The durability of this three-stage air-drying system is exceptional. It appears to be well-made with high-quality materials that can withstand regular use. The robust construction gives me confidence that it will last for a long time, even with frequent operation.The three-stage filtration process is highly effective. It ensures that the air is thoroughly dried and cleaned before it reaches my airbrush. This is crucial for achieving a smooth and flawless finish in airbrushing, as any moisture in the air can cause issues with the paint application. Since using this system, I’ve noticed a significant improvement in the quality of my airbrushing projects.One of the standout features of this air-drying system is its versatility. It works great not only for airbrushing but also for other pneumatic tools that require dry air. The system efficiently removes moisture, oil, and particulates from the air, providing clean and dry air for various applications. This makes it a valuable addition to any workshop or studio.The ease of installation and use is another major plus. The system comes with clear instructions, making the setup process straightforward. Once installed, it operates smoothly and requires minimal maintenance. The user-friendly design ensures that even those with limited technical knowledge can use it effectively.This three-stage air-drying system is a fantastic investment for anyone who needs reliable and dry air for their projects. Its durability, effective filtration, and ease of use make it a standout product. Whether you’re into airbrushing or other pneumatic tool applications, this system is sure to meet your needs. I highly recommend it to anyone looking for a high-quality air-drying solution.
Aliviana York 2.0
2025-03-26 12:22:16
I wish these came with extra Orings for the sediment cups.The first time I took them apart I couldn't get one to reseal at all and finding a replacement Oring locally was like a scavenger hunt, ended up having to go to an industrial supplier and paid like 8 bucks a piece for them.I will probably never take it apart again because of that.The pressure gauge needs a spacer or else it will bind up on the sediment cup retainer ring. Luckily I happened to ave a brass 45â° elbow in a can of random fittings. That elbow gets it away from the bowl and it angled the gauge upwards for easier reading.
Larry Sable
2025-01-29 12:20:33
I needed something to help remove the air in my small powder coating shop and this made a big difference.I like that it comes with extra beads to help with drying and it is very heavy duty!!!Only thing I did was replace the pressure gauge with a better one but that is no deal breaker.5 stars!!
William
2025-01-03 21:14:25
Needed this to keep the moisture out while airbrushing, and it does the job really well
millerized
2024-12-27 14:48:49
Out of the box, you get everything including a few extras. 3 extra bags of dessicant. Well worth it to have a few extras on hand while your used ones dry out. An extra coalescing filter, and extra 'fines' filter round out the package of spares. Super nice to have those as well. Construction is aluminum, as mentioned, but not the soft stuff you'll get elsewhere. Probably 6061 or similar. Threads are true, and easy to seal with the PTFE tape included in the kit. All the extra fittings, from reducers to nipples to an air chuck quick disconnect outlet are hard to beat. They seal well. The only issue I found is that the air pressure gauge is a bit short, and contacts the ring of the coalescing section, forcing a loosening of the gauge to get the filter cartridge out. Not a show stopper, but you might want to consider a small 1/8-1/8 reducer to get it away far enough to not be an issue. Other than that, it works perfectly for what it's intended.
Recommended Products