Your cart is empty.
Your cart is empty.Product Description
It Can Effectively Filter Impurities, Dust, Moisture and Particles in the Air Regulating Function: With Pressures Ranging from 0 to 145 PSI, You Can Pull the Button on the Filter and Rotate It to Reduce the Pressure.
Product Description
AFR2000 Air Filter Pressure Regulator
- Air inlet size: 1/4 NPT
- Flow:500L/minutes
- Max Working Pressure: 145PSI(10.3BAR)
- Operating Temperature Range: 40-140F(5-60℃)
- Drain Type: Manual Drain
Product Feature
Precision Pressure Gauge
- The Pressure Gauge with Purple Copper Core is More Accurate to the Pressure Induction, and the Metal Shell is Resistant to Impact.
- (psi/mpa)
Efficient Filter Element
- Filter Element Pore Size Uniform, Close Arrangement, Seamless Welding Process is Used in the Connection, Not Easy to Deformation, Impact Resistance.
Transparent Filter Cup
- Transparent Filter Cup Allows You to See the Volume of Water and Oil in the Glass.
- The Capacity of the Cup Must Not Exceed 80%.
- The Drain Port is M5
Complimentary Accessories
- We Will Give Away the Following Accessories: 2 × PC-1/4-N2，2 × Male Pipe, 1 × Teflon Tape，1 × English Instruction.
Steps for Replacing Filter Element
Step 1
The Air Filter Pressure Regulator is Placed Horizontally.
Step 2
Remove the Transparent Filter Cup by Turning It Counterclockwise.
Step 3
Replace the Supporting Filter Element and Tighten the Nut.
Step 4
Turn the Transparent Filter Cup Clockwise.
J. Medina
2025-09-02 11:54:56
This package comes with all you need to replace the regulator on your compressor. The housing is nice, the gauge is clear and easy to read, and the package includes several different fittings, including a shutoff valve. The knob lifts up to turn, and then pushes back down to lock. The plastic does feel a little cheap, but I rarely change the pressure so I dont expect any issues.
John Donahue
2025-08-31 17:03:59
We’ll built. Functions very well. Regulates very well and catches any water vapor and grit.Used on a 23 gallon air compressor. Easy to mount.
Placeholder
2025-07-27 10:29:58
Overall, it's rather cheaply constructed when you look at the plastic components. The threatings okay, and it is suitable for running air. it does not seem to leak.I used mine to drop 90 psi air down to about 3 PSI so I could use my big air compressor to supply Air for a bank of aquariums. My big compressor kicks on about once a day, and this allowed me to replace a whole bunch of little unreliable air pumps, and makes the area around the aquariums a whole lot quieter.I would probably buy this again, but I would be much happier if they had a higher quality adjustment knob on it.In their defense, it does work even though it is ugly.
E. G.
2025-07-22 13:47:45
I needed just a filter to keep dirt and dust away, but found this that came with an oil/water filter for almost the same price. Decided to try it and so far works perfectly. It's airtight and see no loss in pressure whatsoever for my amateur airbrushing needs. There are two regulators; one for air pressure and the other to maintain the amount of moisture that goes out. So far, it has surpassed my expectations in performance, although the main regulator knob can be improved with a little bit more precision, which is not a deal breaker. I love this product for its quality and value for the price. Don't hesistate to buy this if you're in need of an airbrush compressor filter regulator.
Dragon_dude
2025-07-11 10:01:42
Found out that I had a leak on one side ports due to bad 1/4" NPT threads on the body; about 4 threads in. I did use a small amount of teflon tape, maybe 3 to 4 wraps, on the included couplers however did not make a difference since the threads on the body was not very good. I ended up getting a replacement through Amazon, but the replacement came in a relabeled box and was missing all 4 couplers. So I ended up returning for credit. 5 stars for Amazon's return service, 0 stars for inconvenience, lost time, and crappy QA on the product.I just noticed that there were other reviews on here that experienced the same cross threading issue also.On the positive, the price is right if you can get a working set. The brass couplers themselves are nice quality and have consistent threading on them. The quick connect couplers were also nice quality, though i'm unsure of the material.Good luck!
Gary
2025-05-02 17:01:59
Was used with a bubbler system allowing regulation of air in bottom of parts washer.
Rene Ramirez
2025-04-04 11:00:41
Usually, you can change what side the "input" goes by removing the pipe plug on the reverse side. NOPE NOT THIS ONE. I tried heat, I tried Kroil. I tried heat and Kroil. That pipe plug aint coming out especially since the Allen key got spun (yes had to put that much force) So had to do creative plumbing the get the tubing to the proper "input" port instead of the way I wanted it.Also, the pressure gauge will not seat where the gauge is properly centered. My OCD cringes at that but the gauge works.Its inexpensive, it kinda works and its not leaking. Next one I but will be from someone else which is a shame because I have NEVER had any issues with any TAILONS products.
Guy from TX
2025-03-25 16:24:17
The first regulator that arrived didn't function quite properly. I contacted TaiLonz simply to ask if we had an error on our side, and they immediately offered to send a new unit without ever being asked to do so.New unit arrived today, our guy installed it, and it works like a charm!Super happy with this seller!
Stan
2025-02-05 20:06:33
Has a airleak between black and blue parts on Regulator. I return it. Do not buy.
Recommended Products