Your cart is empty.
Your cart is empty.TAP MAGIC 10016E EP-XTRAOZ ONE FRIENDLY CUTTING FLUIDS - 16 OZ. SPOUT TOP
Benjamin M.
2025-09-07 17:46:42
Tap Magic cutting fluid is superb when used properly with a slower drill speed. It also works great to remove markings made by using a wax pencil, a permanent marker, and dye that are often used during lay out. I don't trust any other fluid with my drill bits and hole saws when drilling into any metal. Watch for smoke. That makes it an obvious sign that either too much pressure is being applied or too much speed is being used.
Jesse
2025-06-16 11:44:03
If you haven’t used this before, it’s a thin oil, so runny, but I use it for tapping and lathe turning and it works fine in steels
sandyk490
2025-05-19 15:17:59
does work, thank you
Dan
2025-05-12 10:22:20
This for me, a DIY/hobby welder/fabricator changed my entire perspective on drilling/tapping oil. In the past I've used multiple types of oil, motor olive, vegetable oil, light machine oil, WD-40 etc... this performed 1000% times better. I tested it out using a drill press with a ½ cobalt drill bit (mid grade bit) drilling through 3/4 mild steel flat bar at 500 RPM's. It drilled through it like butter. I only had to apply a small amount of fluid pre dill and only once halfway through the drilling. it's a good size bottle for the price and it works fantastic! I highly recommend it
Dude
2025-04-11 17:41:17
Great for drilling and taping . Would be even better with a red cap to seal it. The one they sent was garbage.
S. Rodriguez
2025-03-11 11:56:13
Pays for itself. I think so and here is why.Been drilling metal, mostly steel, all my life. I have worn out tons of drill bits over time and I am only a hobbyist.On current project drilling a small set of drill bit sizes over and over for a year now I still get good performance from the select bit sizes I frequently use. 1/8" pilot comes to mind as I use than on everything to get started. Yep still on same bit.I decided to use an old 4oz can I save for tapping this past year on drill bits. This greatly improved drilling performance and as noted extended drill bit life.Like the results with drill bits so much, I started to apply to metal cutting bandsaw, steel cutting chop saw, etc.This is why I purchased the 16oz size of Tap Magic. I pour it in four squeezable oil bottles with needle type tip and keep one at every cutting station.Love Tap Magic.
Devon Madison
2025-02-03 10:29:51
Tap magic works great been using it for years. Worth the money.
Fordman
2024-12-02 10:31:19
Great product for drill press
Recommended Products
$69.80
$ 28 .99 $28.99