Your cart is empty.
Your cart is empty.Charles L.
2025-08-27 12:23:10
Parts were missing, ( wheel axil).no assembly directions.
Super Man
2025-08-26 12:14:55
It was easy to assemble and it is sturdy when pulling and tearing off paper sheets.
ALF70
2025-07-30 18:52:04
It is great for the DIY, I can't give it a 5 star as there's no instructions to put it together and was missing some bolts. The clamps that holds the paper in place a very cheap and I am going to make some out of metal. For 130$ it will work, but should be in the under 100$ range
Mike D
2025-07-10 13:26:44
Gave me way too many washers, which was ok. Just the right amount of bolts, and shorted me 4 nuts.Assembly was fine, used a pic of the unit. Cut and dried assembly until I ran short on nuts just as I was installing the tear-off sections. I modified the tape rollers by using fender washers on each side to more smoothly control friction to keep the tape tight to the paper. The supplied washers are way too small and slide right inside the rollers lol.
Dawson Smith
2025-06-11 09:49:49
Love the “36 bars ,36†&2-18â€paper is how I set mine up.I’m gonna order a 2nd one .this a lot better than 18†paper machines ..
Jeong W. Lee
2025-05-31 11:55:47
4 lug nuts were missing, sent me 2 left frames that was hard to adjust to fit in wholes that was supposed to click together.. I had to jig it and force it for 30 minutes. Same old made in China chip junk!Since I'm missing 4 lug nuts I can't attach my cutters now!! I gotta go to home depot I guess to buy me some right?I would not recommend this product to anyone. Oh and the wheels that come with this product is a cheap plastic wheels that was worse than the toy wheels.Treys were already bent up.
Michael J Kimball
2025-05-27 16:46:18
Very nice for the price
Capt. Obvious
2025-01-22 11:47:43
I was happy that it arrived within 24 hours of my order but this NOT worth what I paid.FIRST I had to weld up ALL FOUR holes for the tape dispensers and redrill new holes that were straight otherwise the tape would dispense at an angle to the paper.SECOND The spot welds to hold the tray sides together were not holding. I added 7 spot welds to make the trays solid.THIRD I recieved twice the washers needed, half the nuts needed and was also short two bolts.AND LASTLY I'm a cultz, and the extremely cheap plastic wheels will need replacing. I already accidently hit one of the wheels with my foot breaking the wheel in half.
Recommended Products
$62.07
$ 30 .99 $30.99