Your cart is empty.
Your cart is empty.Product Description
TCT-MOTORPARTS Saddlebags Saddle Bag Guard Rail Bracket Fit For Harley Touring Road King FLHR 1997-2008
Saddlebags Guard Mount Bracket
Chrome & Black
Condition: Aftermarket 100% Brand New
Material: High Quality Metal
Position: Left And Right
Custom made from heavy-duty steel tubing and beautifully chrome-plated; Adds protection against unwanted damage to your saddlebags; Each kit comes with rear saddlebag guards, side rails for easy installation
Replacement: H-D#91216-97; Note:Does not fit with fender filler panels
Saddlebags Guard Mount Bracket Accessories:
Justin
August 14, 2025
Fit my 07 Electra Glide like it was OEM. I used the original HD hardware from the bag guards.Quality seems alright, fit was great, hopefully the finish lasts too. I'll update if anything changes.
Rich
July 20, 2025
If you're getting rid of your saddle bag guards? This part is a perfect fit. 06 ultra classic, two bolts on each side and your done.
Dennis Pridmore
June 9, 2025
They are lighter gage then factory and the hardware that is sent with them are garbage but they do work and for the cost you can't expect oem parts I would have gave a five stars but the hardware was disappointing even for the price the alen screw would not even tighten up in the locknut that was sent with it just stripped out with out torquing it I installed the on 2008 road king. I have before and after pics to get an idea.
David C.
June 6, 2025
This cleaned up the look of my 01 Ultra Classic.
Aditya B.
May 8, 2025
This is good quality aftermarket, similar to the on HD sells for Sportsters. I managed to install this with the burly sissy bars (also aftermarket from Amazon). Others recommend bending the pipes, I used a steel spacer to cover the gap. Used the following:- 0.5"x0.75"x0.75" steel spacer (02 pcs.). I painted these black myself.- 1/2"-13 x 3.5" lg steel bolts (02 pcs.) for suspension.- 5/16"-18 x 3.5" lg steel bolts (02 pcs.) for sissy bar.Importantly, attempt this only if you have a lift to pick up the bike from the frame. As soon as you remove the suspension, the rear will drop and will be impossible to pick and re-align without a lift. My only concern would be the paint thickness, it is really thin.Really happy with the mod. The bike is officially travel ready now!!
billy s worthy
May 2, 2025
These bars are solid and fit really well. can not tell the from OEM. Bolts sent with bars are a little short so you will have to get two longer bolts for the top attachment point.
mike
February 1, 2025
The right hand side was off a little but when the bolts had been tightened all the way it went into place and worked. After install of the left side, the turn pin holes that hold the luggage are off by over 1/2" , I took off the factory rubber lower mounts , the luggage moved down a bit but the twist pin holes are still so far off it can not be installed. My factory mounts are very rusty but worked, I took months to get around to change them. make sure you install them right away
Mark
January 25, 2025
Good quality. Easy to install. They sit too far to the rear. Saddle bag is about 3 inches past rear fender. Makes it look stupid. For $40 ill keep them. I'll custom fit bags to it or alter the brackets. You can't use these with the chrome front protector bar. There's not enough room for both between frame and fender. These are cheap. Buy them and play around with them . You might find a bag that looks good.
T-Hamm
December 7, 2024
The media could not be loaded.
Recommended Products