Your cart is empty.
Your cart is empty.Tekton Angled End Handled Pry Bars are made with a bar stock that's heat-treated to balance strength and toughness. The black oxide finish won't flake or chip off. The end of the pry bar is angled for prying and positioning: slide in between materials or under objects with the pry bar's chisel tip, then use the angled end of the bar as a fulcrum to push apart or lift up the workpiece. The 1-inch diameter solid steel striking cap is designed to be struck by a hammer. The end of the cap directly contacts the bar stock so that any force you apply is effectively transferred through the tool. The large polypropylene handle is impact-resistant and unaffected by most fuel, solvents, and common chemicals. It's lightly textured to provide your hands extra grip when working.
HPRC R&D
2025-08-28 11:46:55
It works perfectly for what I needed it for, pulling down the suspension arm to change ball joints.It works with my S-hooks for one-person operations.It is super stiff, no bending at all.The hand grip is comfortable.
Berserker
2025-08-06 17:05:57
I use this all the time when working on my 76 Squarebody. It was critical for suspension work but I've used it on all sorts of things and it's shown no signs of damage. It's a high quality pry bar and despite my best efforts has not chipped or bent yet.
Lawrence m.
2025-07-24 11:46:33
Seems a good stuff, just feeling the weight and the length. The handle makes it easier to grab without slippery.Easy to use. Kind of expensive, Walmart have same for lesser price. Next time I'll do multiple search before purchasing. Overall go for it.
Eric
2025-06-30 16:02:14
I specifically purchased this pry bar to replace an alternator. I was able to use this tool to pull on the serpentine belt, so I could lock the boss in the loose position to remove the belt around the alternator. Then, after I secured the belt, I used the tool to pry out the alternator. It made short work of the job I had been struggling with before I ordered this tool.This is a tool you don’t think you’ll need, but once you have it, you’ll be glad you did.Pros: price, size, and durability.Cons: the handle does feel a little cheap, but not a deal breaker.Overall, I was able to complete the job with ease. Now I want a full set!
T.D.
2025-06-21 14:36:35
A great pry bar. Heavy duty construction. The business end is chisel like. Love the metal tip on the handle that allows for striking the bar without shattering the handle.
Cody
2025-06-01 10:08:32
Nice pry bar, shaft isn't as big in diameter as I thought it would be. But seems very strong so far.
TROGDOR
2025-05-17 11:18:16
The abuse I have put this thing through is actually crazy. I work as a heavy duty diesel mechanic, semi trucks, coach busses etc. this pry bar has been nearly bent at a 45 degree angle and it always snaps back straight. I have used this to turn a 1" crossthreaded bolt by turning a wrench with my full (fat) weight prying against the wrench with this bar. Fantastic.
Customer
2025-05-12 18:40:08
This tekton prybar comes with a striker at the bottom end if u need to hammer it into place. It is long and built pretty well. I've used it to work on the roll up doors for a truck and it does the trick. These tekton tools are always very well built and works perfectly. I highly recommend buying this pry bar.
Sandeep
2025-03-20 11:53:35
Value for money.
Customer
2025-02-25 12:50:19
I have put this thing through the test. I used it for some serious automotive jobs and I have had no issues with it. The strike plate at the top is solid and the bar itself is sturdy. Great addition to the tool box.
Tim
2025-01-25 18:36:51
I like it too much Thanks
Robin Davindisch - Quebec
2025-01-17 10:18:32
For a 50$ Pry Bar, thats made in the USA, it's pretty damm amazing. The only thing I can and will complain about, is the handle Grip Quality and size. Especially the size. Compared to a SnapOn PryBar, where you can put 2 hands on the grip, You can only put 1 hand on the Tekton. There is no Hand protection when hammering and the thickness of the grip is a little too small for the size of the bar. That handle would be good for a 24" bar, not a 36in. Handle is made of hard plastic, which feels a little "Chinese" to me, for a bar thats made in the good'Ol US of A. But like I said, for 50$cdn, it's gonna do the job. Price is right. The steel is great. The tip is well cut, and the angles for prying are great. Like I said, there could of been a little more design effort put into the Handle.
Recommended Products
