Your cart is empty.
Your cart is empty.MADE IN THE USA! The LEDGE is a large cup holder designed to securely hold top-heavy and/or fat-bottomed drink containers - please see all measurements shown in the product pictures. The LEDGE fits snugly between the interior door glass and seal of MOST vehicles. Installation may take a little more effort than expected, please feel free to contact us for assistance!
Harrison
2025-09-03 12:33:06
This is a great product, my Mitsubishi Mirage had cupholders under the main console that were too small for my mug, so I thought I'd give this a try. The back has a soft piece to keep it from scratching your window, it slides into place easily, you can even move it back and forth along the door depending on where you want it. My mug fits great, it's very sturdy, and opening and closing the door doesn't dislodge it. It moves just a little bit when you roll the window up and down, but if you have a full mug in it that seems to keep it in place, even without a mug in it though the little bit that it moved doesn't seem to be a problem. I initially bought one to try it out but I got a second one for the passenger side as well!
Teresa tmarienau
2025-08-20 13:34:54
This is a X-large car door cup holder. I drive a Chevy Malibu. When I tried to install this cup holder with the paper like it explained to do, it didn’t work the paper crumbled up. So with my car door open, I rolled the window almost all the way down, liking about 1/2 inch, then then looking over the top of my door looking down so I could see exactly where it was going I placed the back of the cup holder in between the glass and seal. It did take a pretty good push but then it went right in. It’s pretty deep and will hold any cup or bottle that I have. I love these.
Bren M
2025-08-11 10:37:38
Very sturdy. I really wanted these to work for us. These simply would not fit our doors- way too tight and still sticking up a good inch. 2005 Buick. Was afraid they would damage something if forced.
L.Cook
2025-07-25 21:52:26
The cup holder is a beast. What makes it so nice is that it fits different door thicknesses. Its size will fit a wide variety of cups and mugs. It is very sturdy and not likely to break very easily. I am very pleased with this.
L.A.S.79976
2025-06-12 15:22:21
I can't find anywhere to slide this on my '21 Toyota C-HR's driver's side. Will obstruct door handle, buttons, too narrow toward the back or hits my arm toward front.... Anyone else have these issues? Am I doing something wrong? Have had it 4 months w/ot using it.
Customer
2025-05-15 11:12:07
Love this cup holder. All other cup holders were too narrow to fit my door. This one is wider to fit the area between the window and inside of the door. The cup holder part is also big enough to fit larger beverages when buying a fountain drink or large coffee at a convenience store. It also fits my tall yeti mug. It's very stable. The basket part is larger than a standard aluminum can, or small bottled water so they wiggle a bit, but is deep enough that they do not tip and still works just fine. My car only has 2 cup holders in the console, and with my phone holder in one spot (I need it for the gps), so there was only one spot left. This cup holder is a perfect solution. Now both my husband and myself have a place for a beverage. It worked so well, that I bought another one for the passenger side. It was a little tricky getting it in place...it seemed like it did not want to slide in the door. However, when reading instructions on the thin piece of cardboard that comes with it and then using that cardboard to secure the cup in the window, it slides right in. Just be sure that if you roll down the window, you may have to hold the cup holder in place when rolling up the window, as sometimes it can ride up a bit.
Monardia
2025-04-10 15:55:55
It is a bit difficult to initially get it into the window space in my 2006 Cadillac srx . But they include a card in the cup holder that has links to videos to held and the card is also used to help get it in. It took me a bit of time to get it in but once it’s there it seems all right. I wouldn’t put the window the entire way down till you are sure it is in properly. I have a 32 oz water thermos that measures 3 1/2†across and it holds it very nicely. I just ordered a second one for my husband’s side of the car. I find you need to find a position on the door that doesn’t interfere with the side view mirror and that it is far enough back to lift your bottle out without hitting where the window slopes down in the front. This holder is really stable and sturdy and your bottle stays put. It really is designed to hold bigger bottles and cups , smaller ones may bounce or spill without tight lids. I tend to drink large drinks so it works great for me.
Brian G.
2025-03-12 18:58:20
Arrived quickly and holds big drinks great. I would recommend periodically you need to push down on the top to keep the item from working it's way out. I didn't on my first pair and lost the one on the passenger side. Had to replace that one.
Donna FreemanSeadevil2515
2025-01-07 17:20:57
I use this cup holder on the passenger side of my vehicle. I had a cheaper model from another store which was really flimsy, only paid a few bucks for it,. I used it a lot, and because it was so flimsy I lost it somewhere. I told my husband I wanted to get another one but they weren't selling them anymore. So I looked up on Amazon and found this one, and am very pleased with quality, and it's very sturdy. Love it...
Romina Marian Cardenas couoh
2025-01-06 12:10:21
Excelente para diferentes tipos de trastes
Lenin Rios
2024-12-30 15:54:51
Me sorprendió su tamaño. Y cumplió con lo requerido. No obstante creo que el precio es elevado
TorontoKidd
2024-11-23 18:01:23
Made in Texas and looks very well made!!
Wade
2024-11-22 09:50:59
Does not fit in all vehicles bit great in the one it does.
Recommended Products
$10.09
$ 4 .99 $4.99