Your cart is empty.
Your cart is empty.Please review all product information to ensure that this product is compatible with your unit.A Message to the CustomerOur staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us...we get it. Let's work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model and/or Sub-modelSpec and/or Type NumberCode and/or Serial NumberYearEngine HorsepowerOur knowledgeable product specialists are always willing to help you verify product fitment.Stay rugged, my friend.
Customer
2025-08-17 13:40:51
Everything fits, works great and I got it quick!!
Jennifer Lucas
2025-08-09 18:44:35
I purchased the set to replace worn spindles and they fit perfectly. NOTE: I also bought 4 new wheel bearings INSTEAD of using the new bushings that come with the kit. Whether you use bushings or bearings, I recommend spending some time and remove the powder coating from the spindle where the bushings/bearings spin. In my opinion the power coating leads to faster wear and resistance even if you use grease. Three things I used to get the bearings to fit. I used 150 grit and 220 grit sandpaper as well as steel wool. Since I had to first remove the powder coat I cheated and used a square (not orbital) electric sander using the 150 grit. I then switched and used 155 grit and 220 grit by hand. Careful not to take too much off as you don't want too loose a fit. NOTE: when sanding by hand use sandpaper with the rotation of the spindle. If you sand perpendicular to the spindle you will see the scratches so before you finish, make sure you smooth it back out with the rotation 220 grit. I finished it with the steel wool. Lastly, I tore one of the yellow caps putting it on (luckily have a few extra new ones) I recommend using a heat gun or something to heat the caps as they will go on much easier (and also heat to remove them too).
Roy Schult
2025-05-22 17:10:12
Fit perfectly on my John Deere G110 lawn tractor. Price is great.
Michael
2025-04-27 16:15:20
Fit exactly as should with no problem.
darcy white
2025-02-06 21:42:40
perfect fit
Reparar compresor de aire
2025-01-22 16:30:05
Entrega rápida
Recommended Products
