Your cart is empty.
Your cart is empty.Product Description
Automotive Brake Pad Thickness Gauge
How to use the Auto Brake Base Plate Tester with Scale ?
Thickness of the brake pad could be measured without removing the tire.
- Place the measuring contacts against the brake disc.
- Push out the measuring rod and place the measuring pen vertically.
- Reading data from the backend, this is the approximate thickness of the brake pads (minus the thickness of the brake iron sheet).
Easy-to-Use Brake Pad Thickness Tool
- Fitment: Fit for brake pads (lV,V category) with 6mm /0.2in thick base plate.
- An ingenious tool that saves time, essential to any vehicle Measure the brakepads of the vehicle without removing the wheels.
- The slim design allows the tool to position the back of the pad So that theprobe can measure the distance between the bottom of theliner and the brake disc.
- Suitable for internal and external brake pads With 1.5mm markand calibration check.
- Easy to operate, align the brake pads and press to measure.
Lestat
2025-09-01 13:27:00
As a tech, i use this for steel wheels. I compared the measurement to my standard gauge tool. It's fairly accurate. If you read anything under 4mm, I would definitely take the tire off to get a better look.
Robert Jensen
2025-08-31 17:42:49
Good tool for the right price
armyvitale
2025-07-22 21:19:23
So when I got this tool, I thought it didn't measure right. I went to work the next day and used it on a customers vehicle. That's when I realized I was not using it right. It measures from the outside of the pad shim to the rotor not from the inside edge. It works well for a quick measurement without taking the wheel off.
David Mayberry
2025-07-20 14:57:40
The part that hold on to the pad broke off within the fist week. It was a awsome tool till that happened
Marcial Larios Jr
2025-07-16 13:48:45
Brake package has been easy to use. Makes my life easier at work.
Maurice Stewart
2025-07-05 10:21:23
Work well
GreatOutdoors610
2025-06-22 15:08:33
Got tired of the “surprise brake-job†at state inspection time. Handy little tool to let you know where you’re at.
J Martin
2025-06-10 18:22:54
I'm not sure I like this. I tried it a few times and double checked against a standard brake gauge and it is close but seemed to read slightly bigger. I think the problem is that this tool reads from the back of the backing plate to the rotor face. If you're measuring the pad thickness, it should be from the inside of the backing plate to the rotor face. Different pads have different plates. My measurements were about 1-2 mm off. That's too much for a professional setting.
Lestat
2025-06-01 16:16:49
As a tech, i use this for steel wheels. I compared the measurement to my standard gauge tool. It's fairly accurate. If you read anything under 4mm, I would definitely take the tire off to get a better look.
Robert Jensen
2025-05-21 14:31:15
Good tool for the right price
armyvitale
2025-05-12 11:24:34
So when I got this tool, I thought it didn't measure right. I went to work the next day and used it on a customers vehicle. That's when I realized I was not using it right. It measures from the outside of the pad shim to the rotor not from the inside edge. It works well for a quick measurement without taking the wheel off.
David Mayberry
2025-05-05 11:47:32
The part that hold on to the pad broke off within the fist week. It was a awsome tool till that happened
Marcial Larios Jr
2025-04-06 11:53:06
Brake package has been easy to use. Makes my life easier at work.
Maurice Stewart
2025-03-27 13:51:36
Work well
GreatOutdoors610
2025-02-18 18:19:18
Got tired of the “surprise brake-job†at state inspection time. Handy little tool to let you know where you’re at.
J Martin
2025-02-15 15:17:23
I'm not sure I like this. I tried it a few times and double checked against a standard brake gauge and it is close but seemed to read slightly bigger. I think the problem is that this tool reads from the back of the backing plate to the rotor face. If you're measuring the pad thickness, it should be from the inside of the backing plate to the rotor face. Different pads have different plates. My measurements were about 1-2 mm off. That's too much for a professional setting.
Recommended Products
$69.99
$ 32 .99 $32.99