THIKPO Universal Fuel Injector Tester and Cleaner Tool Kit, DIY Cleaning Tool Kit, 8 Pulse Modes, 4 Wire Dual Channel for 2 Fuel Injectors, 4 Size Cleaning Adapters, 12V/5V Output Power

UPGRADED UNIVERSAL FUEL INJECTOR TESTER AND CLEANER KIT

NOTE: We promise a 3 years after-sales service. If there is any problem with the fuel injector tester, please let us know. Don't worry! We will send you a replacement

TEST 2 INJECTORS SIMULTANEOUSLY--- Our THIKPO fuel injector tester has two pairs of pulse output terminals (test leads), which can test two fuel injectors at the same time for comparison while some brand which has one pair of pulse output terminals can only test one injector.

8 PULSE MODES & MODE LOCK FEATURE--- Designed with 8 pulse modes, help you diagnose and clean injectors, and easily identify common faults such as stuck, blocked, leaked, or burnt-out conditions of the fuel injector. Its mode lock feature ensures test condition uniformity.

4 SIZE CLEANING ADAPTERS & UNIVERSAL FOR MOST INJECTORS--- Come with 4 different size adapters, this injector cleaner is compatible with 12V injectors of almost all vehicle models, for both EFI and GDI injectors. Clean the injectors effectively for you.

PROTECTION SYSTEMS--- Designed with power input reverse connection protection and output short circuit protection function. When the fuel injector is damaged or short circuit of the pulse output terminal, the power indicator light will flash to prompt you. Ensure the working is safe and make the injector get effective testing and complete cleaning.

8 Pulse Modes (Mode 1 - Mode 8)

Mode 0: Standby, no output

Mode 1 / Mode 5, Single Pulse Low Power/High Power: The Injector Tester will emit a pulse with an approximate pulse width of 255 ms.

Mode 2 / Mode 6, Short Pulse Low Power/High Power: The injector tester will emit 50 pulses with a pulse width of approximately 7 ms.

Mode 3 / Mode 7, Long Pulse Low Power/High Power: The injector tester will emit 100 pulses with a pulse width of approximately 3.5 milliseconds.

Mode 4/Mode 8, Continuous Pulse Low Power/High Power : The Injector Tester will continuously output pulses at a rate of approximately 50 pulses every 1450 ms with a pulse width of approximately 7 ms.

NOTE: During pulse output, the MODE SET button is locked, please press the PULSE button again to terminate output and then the MODE SET button is unlocked, and you can set the mode again.

4 Size Fuel Injector Cleaner Adapters

Once an injector becomes clogged and the spray pattern changes from mist to stream, the injector must be replaced or cleaned.

Replacing fuel injectors can be difficult and is always expensive. Cleaning is a good option when the injectors are clogged.

The 4 size cleaning adapters included are for DIY cleaning of fuel injector nozzles removed from the engine, which can improve your engine's performance and save your budget.

• Small and Large Size Adapters: Compatible with fuel injectors on most vehicles.
• Medium Size Adapter: Compatible with VW and Audi vehicles.
• Adapter with Threaded Hole: Compatible with BMW N series vehicles.

CAUTION: It requires a combination of 12V DC power (not included) and an injector cleaner (not included). Please prepare these necessary tools before cleaning work.

High Efficient and Wide Application Diagnosing Cleaning for Fuel Injector

WARM CAUTIONS:

• The cleaning operation of fuel injector cleaner kit requires carburetor cleaner or injector aerosol (not included) and 12v DC battery power supply (not included). Please prepare these necessary tools before your cleaning.

• When using the fuel injector tester cleaner, please do not expose the cover and plastic housing to cleaning agents to avoid damage.

Additional Function: This injector cleaning tool can also be modified for relay testing or solenoid valve testing, and other modifications should be carried out under the guidance of professionals.

Easy to Operate the Fuel Injector Tester

• 1. Turn off the vehicle engine.
• 2. Unplug the injector wires of the vehicle to be tested, and then connect a pair or two pairs of the pulse output terminals to the vehicle injectors. (The red pulse output terminal is connected to the positive terminal of the injector and the black pulse output terminal is connected to the negative terminal of the injector.)
• 3. Then connect the red clip of the injector tester to the positive terminal of the 12V car battery and the black clip of the injector tester to the negative terminal of the battery.
• 4. Insert the DC plug into the power input port of the injector tester.
• 5. Press the MODE SET key to switch the desired pulse signal output modes, and the screen will display the currently selected mode.
• 6. After selecting the desired pulse signal output mode, press the "PULSE" key, the tester will output a pulse signal to the injector of the car to be tested, and the signal indicator will light up when the pulse signal is output.
• 7. If you need to repeat the test in the same mode, you can press the "PULSE" button again.
• The MODE SET button is used to switch modes, but during pulsing it will be locked and you need to press the PULSE button again to terminate the pulsing output, then the MODE SET button is unlocked.

PACKING LIST

Specifications

• Power supply : 12V battery or DC 12V (recommended 2A) power adapter
• Working conditions: 0°C-40°C; relative humidity ≤80%
• Storage conditions: -20°C-50°C; relative humidity ≤85%
• Unit Size: 4.70*3.14*0.98 inches
• Weight: 0.75 lb

Note

1. Before using this injector cleaner, the vehicle engine must be turned off.

2. It is recommended that you wear goggles or take other measures to avoid splashing on eyes and skin surfaces.

3. Use this Injector Cleaner only in a ventilated area to avoid inhaling exhaust fumes and vapors emitted from the vehicle.

4. Do not short-circuit the positive and negative terminals of the vehicle battery.

5. Do not smoke or light a fire in the vicinity of the vehicle.

6. Do not spill automotive fuel on hot engine parts.

7. Do not get close to any rotating (or moving) parts of the vehicle and do not touch any hot parts of the vehicle.

8. Do not touch any part of the automobile that carries a dangerous voltage.