Your cart is empty.
Your cart is empty.Dr. Tom
2025-08-25 15:55:37
This tool does a great job of cutting the horizontal cut, but does not provide enough lip on the vertical. It takes some getting used to, but in the end very worthwhile to purchase. Use your good razor cut for the money cut.
Gary muniente
2025-08-11 11:56:43
Good quality. Works as it should
Relayer
2025-07-27 15:00:38
The media could not be loaded.
David G
2025-06-24 18:55:51
After botching up some tiles, I stopped trying to use this for the face cut and only used it to do the edge cut. The problems I had were: 1 - the tool marred the surface of the tile. I had to put some painter's tape along the face of the tile to prevent that from happening. 2 - the tool didn't make a clean cut, even when making several passes of increasing depth. 3 - The width of the recess on a factory tile is 3/8". This cuts only 1/4" and sometimes that extra 1/8" makes a difference, especially if you are cutting opposite sides.I think where this tool came in really handy was in making the edge cut. I could set the depth to 3/8" and run the tool along the edge from the bottom side of the tile, then run over the face edge with a utility knife and a straight edge to make a nice, clean cut. It is really hard to get that edge cut with a utility knife, so this saved me some time.
Colgam
2025-06-01 18:28:03
I ordered cutter for work I'm doing on my home. It was an update from old to newer. The project was already under way when I received a link about your tool. Outer rim pieces and corners had to be cut to specific lengths. For the time of delivery, the ceiling was finished, except for perimeter tiles. I used the cutting tool and it cut through like a warm knife through butter, no fraying, no dust and the edge was smooth. Thanks
KD
2025-05-23 13:16:05
Tool is not worth the money. Blade is dull. Tool leaves residue on ceiling tile. Just a bad buy. Was hoping to save some time and it was just a joke how bad it worked.
Fred Hamble
2025-04-16 16:02:26
Unique tool that does the job.makes cutting easy and neat!
JAY RO
2025-03-01 10:21:00
I used it to cut the shadow line on the ceiling tiles that I had to cut down to size for my new drop ceiling install. When cutting down to size needed you lose the existing shadow line. After getting familiar with the tool it worked as intended.
Bernie Kisiloski
2025-02-07 17:49:57
Good delivery
Reg
2025-02-02 16:33:02
You see videos of the pros doing it free hand with a blade .. but this tool means anyone can do it.Simple solution to something that requires skill...
Customer
2025-01-26 18:15:58
Used this today for the first time.It cuts the horizontal cut for a shadow line ceiling tile perfectly.Clean and consistent depth of cut. Saves lots of time.
jim s.
2025-01-24 13:19:31
Good product, but way too expensive.
Steven M.
2025-01-20 15:30:26
Works great
Recommended Products
