Tire Pressure Monitoring System Tpms Sensor Replacement 315MHZ for Chevy GMC Cadillac Buick

• BATTERY RELIABILITY Superior ensor batterypower provides maximum sensor life，longer thanmost sensors ensuring greater replacement value.

• LOWER WEIGHT Lower weight is significantly lighter than most sensors ensures greater security and stability use.

• SCREW RELEASE Exclusive screw release valve provides the interchangeable rubber & metal valve stems, flexibilityproviding a betterfit for a wide variety of Vehicles.

• Reference Part Number: 13598771 23445327 13586335 22853741 20923680 25920615 15922396 25799331 15254101

For Chevrolet

2007-2013 Avalanche 2002-2018 Aveo 2017-2021 Bolt 2010-2015 Camaro 2011-2017 Caprice 2008-2017 Captiva Sport 2008-2010 Cobalt 2015-2022 Colorado 2009-2013 Corvette 2011-2015 Cruze 2016 Cruze Limited 2007-2012 Equinox 2008-2011 HHR 2006-2020 Impala 2014 Impala Limited 2008-2015 Malibu 2006-2007 Monte Carlo 2007-2020 Tahoe 2009-2017 Traverse 2013-2012 Trax 2008-2009 Uplander 2011-2017 Volt 2007-2022 Express 2007-2019 Silverado 2007-2020 Suburban

For Buick

2007-2011 Allure 2016-2019 Cascada 2008-2017 Enclave 2013-2022 Encore 2015-2020 Envision 2006-2016 Lacrosse 2007-2011 Lucerne 2011-2017 Regal 2012-2018 Verano

For Suzuki

2007-2008 Suzuki Forenza 2007-2008 Suzuki Reno 2007-2009 Suzuki XL-7

For Pontiac

2008-2010 G3 2008-2010 G5 2008-2010 G6 2008-2009 G8 2007-2008 Grand Prix 2008-2009 Montana 2008-2010 Solstice 2007-2009 Torrent

For Hummer

2007-2009 Hummer H2

For Cadillac

2013-2019 ATS 2016 CT6 2008-2019 CTS 2006-2011 DTS 2014-2016 ELR 2007-2020 Escalade, 2007-2016 SRX 2009-2011 STS

For GMC

2007-2016 Acadia 2007-2009 Envoy 2010-2020 Terrain 2008-2020 Savana 2007-2019 Sierra 2007-2020 Yukon

For Saturn

2007-2010 Aura 2007-2010 Outlook 2008-2010 Sky 2007-2010 Vue

For Saab

2011 9-4X 2010-2012 9-5

static learning mode

learning steps

1. Install the tire pressure sensor correctly.

2. Pull up the parking brake.

3. Turn the ignition switch to the power-on position (engine off)

4. Enter the tire pressure learning mode through the vehicle dashboard. There will be corresponding prompts on the instrument panel (there will be differences in the method of entering the tire pressure learning mode for various brands of models, please refer to the vehicle manual or consult a professional).

5. Starting from the left front wheel (some models will have the corresponding position turn signal flashing), use the activation tool to activate the tire pressure sensor. If the activation is successful, the vehicle will whistle or the turn signal corresponding to the position of the sensor being learned will flash.

! Note: The first sensor should be learned within 2 minutes, otherwise repeat step 4

6. After the left front wheel sensor is successfully learned. For the remaining positions, activate the remaining tire pressure sensors in the order of front right, rear right, and rear left. The activation prompt and activation success status are the same as step 5.

! Note: The remaining sensor learning needs to be completed within 3 minutes, otherwise please skip back to step 4 and repeat the sequence operation.

7. Turn the vehicle to the state of power off. Adjust all tire pressures to standard tire pressure values.

8. The tire pressure warning will disappear after the learning is successful (if the tire pressure value is supported, the real-time tire pressure data will be displayed). If learning fails, repeat steps 4-7.