Your cart is empty.
Your cart is empty.Product Description
MIRROR Print your design on the BLANK side.
Notes: After printing, allow the paper to dry for a few minutes.Please keep the printed image away from liquid (such as, water, drinks and sweat) before washing, or the ink may run.
Cut out your design with scissors. It is NOT compatible with cutting machines.
Apply HEAVY pressure and High Temperature (190℃ /374°F for Heat Press Machine).
Peel off the backing paper while the transferred image is fully cool.
TROUBLESHOOTING
1.Why does the backing paper peel off while printing?
a. Check if the transfer paper gets damp;
b. Check if the transfer paper has been bent;
c. For some front fed printers, sometimes it may have such problem. Suggest you use transparent tape stick the lifting edge of the transfer paper and then feed through the printer. However, if you receive bent or damp transfer paper, don't use it.
2.Why the image cannot stick to the cotton fabric?
Light 1.0 requires heavy and even pressure to be used. If the pressure is insufficient, the image won’t well adhere to the cotton fabric. Heavy pressure means you should hold the iron with both hands and use your whole body's strength to press the iron.
3.Why does the transferred image look grainy and smeared?
If you peel off the backing paper while it is still hot, the image will look grainy and smeared. Light 1.0 requires you to peel off the backing paper after the transferred image is completely cold. We suggest you wait for about 10 minutes and then peel off the backing paper.
Jasmine
May 19, 2025
Lifted up with t shirt material
Recommended Products