Your cart is empty.
Your cart is empty.Product Description
Steering bell cranks, drag link (blue-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled) Enhance steering precision, strength, and looks with Genuine Traxxas machined aluminum steering bell crank assemblies. Engineered exclusively for Rustler, Bandit, and the Slash, the ball bearing equipped bell cranks offer silky smooth operation for reduced friction and long life. The pre-assembled units are easy to install, include detailed installation instructions, and are available in fire-red or a brilliant-blue anodized finish with laser-etched Traxxas logo. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.
From the Manufacturer
This is the 3743A Anodzd Alum Steering Bellcranks Blue from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truely the fastest name in Radio Control.
DLE
2025-07-06 16:30:22
Quality part, looks good, works good and all parts fit perfectly.
CHAD F GRUNOW
2025-06-29 16:40:28
Good looks and vary strong. Can take a lot of abuse. Mine are still working just fine. And I bash hard.
Matthew R
2025-06-23 16:47:52
These have bearings. I am a big fan of bearings. ("its all ball bearings these days", lol....reference to the movie Fletch if you didn't catch that)I think my car handles better since this upgrade. I believe the white plastic stock parts may have been flexing under the stress of my 2075 servo at high speeds. (read: bashing) I think it may flip over less and I see some different handling like the rear wheel coming off the ground on hard turns at higher speeds. It is subtle but I do believe they give some extra steering performance.If you think about RC cars, tires are a huge factor. Motor, ESC and battery are obviously big factors. Suspension setup is huge. Steering is also a big deal. Having a high torque servo makes a difference to a point. (over 100oz of torque is good enough) For your 125oz Traxxas 2075 servo to work properly and run at its advertised speed and torque properly, bearings and aluminum really help. (no more twisting and bending the lightweight stock white plastic setup)You don't see them much.....you aren't going to admire their great looks much but you also won't see the white plastic anymore. I have heard they can be hard on your servo. I have had no issues but I use a servo saver. Servo saver is a must with these unless you want to replace servo gears.
sam
2025-05-24 20:50:28
I bought this to replace a knock off I got previously that ended up stripping out a bolt and breaking.The fitment is 100 times better then my previous was
Curtis
2025-05-21 16:34:31
While it is a very nice quality it will NOT fit a vintage Nitro Rustler.
Tracy F.
2025-05-18 14:05:33
I purchased the steering bell cranks, going by the description, as I wanted to upgrade my Stampede (new to RC and Traxxas). Was looking around for different aluminum parts, and found this (with numerous other Blue items), and purchased them on 3/23. I travel a lot, and finally got around to upgrading the vehicle ... first part: awesome, second: awesome ... and so on. Got to the Steering Bell cranks, and there was no place to install. I looked and researched and ... no joy; the part does not fit the Stampede. That sucked. It is now 4/26 and my window to return expired on 4/25.The part appears to be very well constructed - so I have nothing against giving the part a high rating (for appearance of quality) ---- but it is very aggravating when a company like Amazon has no quality control on their product descriptions to give a clear picture of what they are selling to us: their customers. My next step will be to provide feedback to the seller, or Amazon, for the faulty listing; which has now cost me $26.00.Se la vÃ
Customer
2025-04-20 11:59:29
Works a lot better with e bearings it comes with. Way better than the stock one was pushing really smooth and doesn't stick so far.
Ben Bishop
2025-04-08 11:22:14
If you take the screws out of the shock tower and the first set on the upper plastic chassis by the fuel tank you can bend it up enough to get the old out and new in. Keeping the bearings in place is difficult but can be done.
Client d'
2025-03-13 17:33:08
Je crois qu’il ne fit pas sur un 44
Customer
2025-01-15 15:03:35
Fast shipping great price thanks
Tyler
2025-01-07 14:43:11
good build quality but returned because this is for the 2wd model. and i have the 4wd...
Michelle Littlejohn
2024-12-15 11:26:27
it is a good product but does not fit my slash 4x4 like i thought, so be sure you buy the right product to fit your vehicle
A&L
2024-11-22 18:13:22
Arrived in two days intact
Recommended Products
$25.99
$ 13 .99 $13.99
$29.99
$ 15 .99 $15.99