Your cart is empty.
Your cart is empty. Treal Brass Extended Hex Hubs Wheel Spacers for SCX24 Bronco Gladiator C10 Deadbolt Betty Upgrades +5mm Black
Features:
-Specially designed for AXIAL SCX24 AXI00002 AXI00001 AXI90081 1/24 RC Crawler Car
-Extending the truck width(+5mm)for a wider stance and greater control and stability
-Weight 2.4g/pc,perfect fitting the wheels
-7mm hex matching stock wheel hub
-CNC machined solid brass billet ensures anti rust, sturdy, durable, wear resistant high performance
You will receive:
Brass Hex Wheel Hubs (4)pcs
Pins (4)pcs
Nuts (4)pcs
Washers (4)pcs
These wheel hubs are designed for fitting SCX24 stock wheels and Treal Beadlock wheels, if you need them to fit other after-market wheels, please double confirm with us. Thanks
Brendan c.
2025-07-27 17:00:34
Very straightforward installation. After reading mixed reviews about these, I wanted to leave one. These fit both the proline hyrax 1.0 wheel and tire combo as well as the Treal beadlocks pictured. This will not fit the stock c10 wheels without modification, because the center hole for the wheel is a smaller diameter than the included wheel nut. These may make the tires rub on the c10 body due to the extended stance.
luke
2025-07-26 21:29:30
Loved them, nothing bad
Jason E.
2025-07-06 17:16:22
Awesome product. Super easy install and adds some extra width. Does fit injora 16 bolt wheels. A little tight, but fits.
MrBlappy
2025-06-05 13:07:02
Have a dremel handy, you will need it. I have RWDrc beadlocks and boy are these puppies tight. So tight that I had to dremel out the inside of the receiver hubs so they lock in place. The pin/lug design is horrible where you will need tweezers and to work on each wheel compared to taking them all off at once. This is due to the open pin design and the extension just locking in over them with a slot in the metal. They could have thought for one more day or tested this out prior to production.In the end I was able to get them to work and they really do help extend the width of your crawler but some of these design flaws I cannot ignore.
mr.elco
2025-03-17 11:17:21
No spacers for the Trx-4m yet, so I made these work. Drill the spacer out to 3.5mm and use a 2mm drill bit and a m2.5 tap to resize the wheel nut. I love Treal's quality and was too impatient to wait for them to make stuff for the trx4m lol
Customer
2025-01-06 18:02:33
Good part . Fit with no problems.
Michael
2025-01-03 17:04:57
Hexes are nice, and IMO, the perfect width for my build. Unfortunately, Treal chose to package the kit with barrel nuts that are just too short, or too soft, or both. They are barely long enough, once the hexes and wheels are installed, to engage just a couple of threads on the front stub axles of the SCX24. And as we all know the treads of the stub axles have a slight taper for the first couple of threads... Sooo... invariably, with just light finger pressure to get the barrel nuts torqued just enough to not fall off, I managed to strip the leading threads of three of the 5 barrel nuts included. So not I have a worthless set of hex extenders. And now I'm basically forced to get another set (of another brand) that uses barrel nuts of adequate length, just to be able to use the Treal hexes. And to make matters worse, I'm down for three days while I wait... They should have made the barrel portion long enough to reach the cross pin in order to allow for the added thickness of a wheel hub. These may work IF you don't want to install wheels on them. But add the thickness of a wheel hub, and nope... The barrel nuts aren't long enough to get adequate engagement on the front axles. I'd recommend looking elsewhere.
Casey French
2024-12-25 10:12:56
Fairly easy to install and fitting real well until the last one. The notch in the hub is cooked and absolutely will not seat over the pin. Rocking 3 extended wheels while I'm trying to decide if want to send them back...
Recommended Products
$34.99
$ 17 .99 $17.99