Your cart is empty.
Your cart is empty.Product Description
Perfectly fit for all Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt End caps, also suitable for All Seastar Hydraulic Steering End Caps.
Designed to rebuild the leaked device on outboard engine, hydraulic trim and tilt unit used to remove/ install the Trim & Tilt Caps without damage it and the steering cylinder
There are three different sizes (32mm, 35mm and 38mm). This pin wrench tool set will make it a breeze in removing trim/tilt that just make sure you choose a correct size wrench when use.
Our MT0004+MT0006+MT0009 wrench set allows you to open the cylinder in minutes without any grief and put it back together with confidence.
Operate easily, only makes both pins line up with the hole and insert, then work with 1/2" breaker bar (Not include).
Chris Fischer
2025-08-07 17:09:19
it worked well for my trim cylinder caps (Yamaha 250 SHO) , at a fraction of the higher priced tools. I replaced the seals and they are nice and dry.....no more sheen in the water. Plus it has the tools for the TILT cap and the steering tube caps!!!!! I made my own part in the past and it was a real struggle. This works PERFECT! You will need it eventually if you're a DIY boat fixer like me. Or else you can spend thousands at the local shop if not.
William C Miller
2025-08-03 14:43:41
Used the Yamaha size to remove the top trim cap .Worked excellent. Had some torque on it and no breakage of the pins .Worth a try for 25.00 $ .
Vickimarie
2025-06-04 15:31:37
Bought this to repair the lift cylinder on our 2012 evinrude 90 hp outboard. These spanners do not fit the end cap or piston spanner holes. NOT a happy camper. See if you can find an adjustable one.
Boatman7lakes
2025-05-04 13:32:59
No issues
Customer
2025-04-23 17:50:39
This tool set is well made and did the job well. I had to remove the caps on my Yamaha outboard power trim cylinders. I highly recommend the tool.
André
2025-03-06 15:49:05
The tools are the right size and the pins are very strong. It did the job well.
Cheech
2025-02-22 17:49:49
It worked perfect it did what it was supposed to do nice quality for the money
Amirul Lasker
2024-12-22 13:27:55
Cheaply made Chinese product. Didn't fit my sea star steering glands as advertised. The pins are off by a millimeter or so. Spend the money and get the good ones made by ONI tools which I got now and fits perfectly or the ones made by Marine tech. Save yourselves some headache!
Recommended Products
$11.99
$ 5 .99 $5.99