Your cart is empty.
Your cart is empty.Product Description
This carburetor is a bolt on and go part, preadjusted before shipping!2001 yamaha ttr225 parts,yamaha 125 parts,2005 yamaha ttr125 grips,ttr125,yamaha 125 ttr spark plug,2003 yamaha carburetor,mikuni carburetor kit for predator 212,2003 yamaha blaster carburetor,yamaha ttr 90 carburetor,ttr125 rebuild kit,yamaha breeze 125 carburetor
Yamaha TTR 125 2000-2003 Yamaha TTR125E 2003-2007 Yamaha TTR125L 2000-2007 Yamaha TTR125LE 2003-2007
Intake Diameter: 25mmm Outer Intake Diameter: 36mmm Outer Diameter to Air Filter:40mm
Package include:1 x TTR125 Carburetor,2x Fuel lines. Please make sure the our item is what you want before you place the order
Compatible with: 2000 Yamaha TTR125, 2001 Yamaha TTR125, 2002 Yamaha TTR125, 2003 Yamaha TTR125, 2003 Yamaha TTR125E, 2004 Yamaha TTR125E, 2005 Yamaha TTR125E, 2006 Yamaha TTR125E, 2007 Yamaha TTR125E, 2000 Yamaha TTR125L, 2001 Yamaha TTR125L, 2002 Yamaha TTR125L, 2003 Yamaha TTR125L, 2004 Yamaha TTR125L, 2005 Yamaha TTR125L, 2006 Yamaha TTR125L, 2007 Yamaha TTR125L, 2003 Yamaha TTR125LE, 2004 Yamaha TTR125LE, 2005 Yamaha TTR125LE, 2006 Yamaha TTR125LE, 2007 Yamaha TTR125LE, Please compare your old carburetor with our pictures to make sure the fitment!
James B
2025-09-03 13:15:01
Bought to put on a Yamaha 125. Bolted it on, let the fuel fill the bowl, kicked it over started right up and haven't had to adjust it at all. great price and great product
bkrowbob
2025-09-01 10:16:14
My kids TTR125 was showing signs that the carb needed work. At this price, it was easier to replace it than clean/adjust the old one. The bike ran as good as new after the install.
Dan Goodman
2025-08-31 18:28:01
Read all the positive reviews and figured I'd give it a shot for half the cost of oem rebuild parts. Unfortunately mine had poor quality castings or the finishing work wasn't completed. Ran super rich - figured out the choke plunger couldn't seat all the way due to flashing on one of the ports. Got that cleared out and the plunger sitting flush, then it ran super lean at 1/4 throttle with proper jetting. Couldn't get that lean spot to go away even with swapping needle from original carb. Gave up on it and rebuilt the oem carb (needle&seat, all gaskets and diaphragm). Spent three times as much in the end, but back up and running well.
jackson s
2025-08-25 10:01:20
I’m very happy with this carburetor! I purchased it for our 2002 TTR125L, and it’s been absolutely fantastic. The bike starts up on the first kick every time, and all I had to do was install it—no tuning or adjustments needed. It’s truly plug-and-play!
Christine
2025-08-12 10:49:59
This is my 3rd replacement carb over the last 12 years on my 2003 TTR125. For a ranch bike it gets abused pretty good, so I consider it normal wear and tear to replace the carb every so often. This carb works great out of the box. I'm at sea level so there are no adjustments/jetting changes were needed after installation. The stock vent hose setup is not used in the same manner, so the other two fittings (other than the fuel inlet and bowl overflow) are simply vent tubes, connect and run the provided hoses down along the frame in front of the swing arm for a clean look.Ensure the air intake nipple on the head side of the carb connection boot is also capped off as well or it will backfire and do crazy stuff.After install, no choke is needed and starts first kick.Keep clean relatively new fuel in the tank, and shut off the fuel line when not in use. Do all your routine maintenance and this will last a long time.
Ray Stoker
2025-07-10 10:16:50
Purchased 2 of these due to I have 2 bikes the same. Put first one on and made minor adjustment and good to go. Second one installed and the fuel bowl overflow was leaking (which is float is bad or most likely the needle is not seating). Contacted company to send me parts to fix it or send another carb. Within 3 days I received another carb. Have not installed yet but just wanted to say this company was on the ball and I give them a 5 Star rating on their response. Great job guys!!
Lelen
2025-07-02 19:33:27
The stock carb on my TTR125L sucked. This item I would give the finish an 8/10 but the bike fired right up. I ended up replacing the jets and the needle with Keihin parts because I am in the mountains the what came on it was not the right jetting for me. Bike shops suck and don't have the big box of jets like they used to so I am only 95% jetted correctly until I source some smaller jets. The bike runs great even jetted slightly off, most people who ride the bike don't notice.
Matt
2025-05-22 13:10:42
Got my ttr125 2001 big wheel to run
daryl
2025-05-19 12:06:23
Works, fit great
Remmy
2025-05-13 15:16:59
Fit great on my 04 ttr125L. Runs great aswell! had to adjust the idle a hair and we were laughing.
James
2025-05-06 12:10:55
Bike ran like a charm after installing this. Good buy :)
Brent Laver
2025-03-10 10:24:39
Unfortunately mine was defective. The little tab holding the float so that it didn't drop too far was too short. As a result the needle kept getting jammed amd flooding the bowl and there was no way to fix it. Too bad.
charles
2025-02-14 16:28:08
not a mikuni oem match but very close. it did need a few alterations an good cleaning to get rid of aluminum filings & fix threads. also does not have overflow port that is shown in picture. but it works well a few adjustments. would buy again for the price.
Recommended Products