Your cart is empty.
Your cart is empty.Product Description
About Us
Twidec focuses on the research and development of various switches, temperature controllers, sensors, proximity switches, capacitors, resistors and other products
There are various industrial and auto parts products here. If you need it, you can go directly to the store to buy it. We hope it will satisfy you.
Horn Momentary Push Button Switch 5/8" Mounting Hole 12V Led Light
- Momentary switch operation type: Push & Hold,ON; Release,OFF
- Switch Shell Color: Black;Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles
- Switch Rating: 5A/250AC, Switch Combination : 1NO1NC
- LED Voltage: 12V;Pins: 5
Product Description
LED Light
- LED Voltage: 12V;Pins: 5
- The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it.The switch can be applied as the switches for the additional equipment inside & outside the vehicle.
Pre-wiring Wires
2.8mm Pre-wired design:easy to install,save your time to connect wire to the switches.
Product Size
Products are available in 16mm and 19mm
Wide application
The switch can be applied as the switches for the additional equipment inside & outside the vehicle.
A variety of switches are available
Jorge Isaac
2025-08-20 16:27:54
This push button switch is perfect for car modifications! The red LED light looks great and adds a cool touch. The black stainless steel shell is durable, and the pre-wiring makes installation a breeze. It’s easy to mount and works smoothly for any custom project!
Meghan Winkelman
2025-08-05 17:12:12
When I received the horn button, I was concern since there were no instructions provided or a website to reference. The terminal side of the horn button has hard to see lettering with NO, NC, and C. I went back to the Amazon posting and found the photos to determine which wires went to which terminals. They also provide 5-short wires, 1-red and 4-black, which have to connect to the back of the button prior to installing the button onto the panel, this made it difficult to see which terminal each wire is on. It would've made it easier if they'd provided 5-different color wires or labels on the wires. I put my own labels on each of the black wires so I would know which was which when the button was installed. You will need to know ahead of time, what normally closed (NC), normally open (NO), what is common (C) (the wire to the horn), and which terminal is ground, Also know ahead of time, if you want the light on in accessory mode and the same with the horn or do you want the horn on always and the light only when the vehicle is running. This will determine if it is "NO" or "NC" and which terminals to connect the wires onto. I never did figure out what the 5th terminal was used for so that was an extra wire; however, the horn works well when the Side by Side is off or running and the light only comes on when in accessory/running mode. Again, it's easier if you understand electronics and have an Olm/Volt meter. It will be a challenge if you don't have a meter or some knowledge of electronics.
David S.
2025-07-28 14:02:41
The media could not be loaded.
Frank
2025-07-21 15:54:06
Good unit so far first three days. For installation be very careful with your hole mounting diameter as the push button had a very small mounting flange.
Nathan
2025-07-08 15:49:21
Works great for my train horn
jason
2025-06-10 11:58:06
The Twidec/16MM Raised Speaker Horn Momentary Push Button Switch serves its purpose adequately. With a 5/8" mounting hole, it fits standard installations easily. While it provides basic momentary functionality, some users may find its design and durability to be average compared to other options on the market. Overall, it's a functional switch for those seeking a budget-friendly solution.
Brenden Murphy
2025-06-09 10:22:28
I received it fast and it’s easy to hook up
Brandon
2025-04-10 16:37:03
After following the instructions and verifying proper installation I tested this button with my air horn. At first it worked properly, but when I put the bolt on the back of it to hold it in its installed location the bolt caused a cross connection and sparked causing the button to shirt out. Guess what? It stopped working. Went to my local auto shop and got a button from there and everything works like a charm. This product looks good, quite small though. Installation instructions are going to be confusing for anyone not used to reading electrical layouts. And the light wasn't very bright all. Quality was poor since it shorted out.
Terra
2025-04-07 12:50:51
Size, shape and use.
EDUARDO GUTIERREZ MARTINEZ
2025-03-01 16:31:40
Está muy práctico
Jon Hunt
2025-02-21 16:57:27
Purchased this momentary button to replace broken horn button on my boat. The led light is nice and not too bright. You can choose between always lit and only when pushed. Always lit is nice. It has a very positive feel, and I like the looks. If I had one gripe, the bezel could stand to be a hair larger diameter. Connections are supplied and fit well. 10/10 would buy again.
ESTEBAN P.
2025-02-08 18:13:46
Es miniatura, voy a imaginar que funciona bien, no tiene sentido que sea tan pequeño, me hace pensar que al apretarlo una vez dejará de funcionar. El tamaño es un poco ridÃculo, no puedo asimilarlo.
Robert
2025-02-04 18:06:55
was good nice looking when installed into the dash, but no wire diagram was not provided with this item.
Recommended Products