Your cart is empty.
Your cart is empty.Product Description
Twinkle Star 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit
NOTES:
1. The water heater owner must manually operate the valve at least once a year to ensure the waterway is clear.
2. Please check to see that the dis-charge line is securely attached and properly in-stalled before lifting the lever, prevent injury or property damage.
3. Avoid contact with the hot water dis-charged during the test to prevent personal injury.
4. At least every three years the valve shall be inspected by a licensed plumbing contractor or qualified service technician and replaced as necessary.
5. If discharge occurs during normal operation CALL A PLUMBER IMMEDIATELY. Discharge indicates an unsafe temperature or pressure Condition or a problem with this valve.
Package Include:
- 1x hot isolation valves
- 1x cold isolation valves
- 1x pressure relief valve
- Material: Heavy Duty Brass
This complete kit made from lead free heavy duty brass for years of usage. One-piece forged brass body effectively prevents any leakage or dripping.
The main isolation valve set is factory tested to be leak-free so that your heater can be maintained periodically during each flushing sequence.
The tankless kit works with all 3/4 inch size is suitable for most U.S. residential usage, both residential and commercial gas tankless water heater brand such as Noritz, Rinnai, Rheem, Takagi, Navien and so on.
Fisher Man
2025-08-29 20:34:26
The isolation valve kit is absolutely necessary in order to properly flush the unit of scale and buildup on an annual basis. I purchased a home that was retrofitted with a tankless water heater. The installation was horrendous with the hot water supply installed on the right side and cold water on left, the TPR located in the wrong place and was unable to be tested because of its location, exposed electrical conductors that had brittle and failing insulation from UV damage and no isolation valves or hookups to properly flush the unit. The Twinkle Star valve kit solved this issue and appears to be of very good quality and works flawlessly.
arles cisneros
2025-08-23 16:43:40
Excellent product at great priceWill buy again and again
Dave B
2025-07-18 21:01:19
Saves a small fortune compared to having a plumber flush your system. Easy to use.
Mike
2025-06-28 12:39:45
This install kit is a must have when installing a tankless water heater. Good quality parts. This kit made my installation quick and painless. The extra contact points will make flushing the unit very quick and simple as well.I highly recommend this kit.
Kindle Customer
2025-04-16 12:26:51
Wanted endless hot water. This works well so far but we lost water pressure and that was disappointing.Don’t know if that can be fixed or not.
Kenneth Hugen
2025-02-09 15:31:36
I installed a new Rannai Tankless water heater. I used these for the isolation valves. Keep an eye in the little flat rubber washers in the unions though. One popped out when I removed it to make a pipe adjustment. I didn’t see it pop out but when I tried to reinstall it, I searched for a while but finally found it! I have a little sheet rock repair and sweat a few copper lines for the PRV, but was happy with the fast delivery, great quality and price.
Lenny Sh
2024-12-17 13:39:30
I said that it is easy to install, because the installation includes only obvious connectivity with standard piping and electrical wires.Replacement would be an easy DIY project.But for the first installation or replacement to the tank heater, you still need to hire plumber and electrician to correctly bring needed water and power lines
Antone
2024-11-17 18:38:27
Great
Recommended Products
$15.85
$ 7 .99 $7.99
$38.77
$ 19 .99 $19.99