Your cart is empty.
Your cart is empty.Product Description
Ceiling Fan Remote Control Kit Works for Hampton Bay/ Harbor Breeze/ Hunter
This ceiling fan remote control kit works for most major 110V 3-speeds AC ceiling fans, compatible with Harbor breeze, Hunter, Hampton Bay and other Ceiling fan Lights.
This ceiling fan & light remote control kit has the function of dimming.
The light dimmer compatible with incandescent light bulbs and some dimmable LED lamps.
Most LED lights and all CFL lights are non-dimmable, light dimmer only supports the ON/OFF function in that case, and it may cause to flicker when using the dimming function.
This item does not include a 3V battery.
Our products are regular original OEM products with reliable quality.
Note: Not recommended for use with hugger style ceiling fan.
Ceiling Fan Remote Control with Light Dimmer
It brings great convenience to our life !
It adds remote control compatibility to any fan.
This remote controller is designed for 3-speed ceiling fan to separately control your ceiling fan speed and light brightness. There are four buttons (HI, MED, LOW, OFF) to control the speed of the fan and off.
Please note that this remote not have the Reverse button. light on/off button just controls the brightness of halogen and incandescent lamps On/Off. LED/CFL lights are Not Dimmable, and the remote only control the On/Off in that case.
It has a LEARN Key that allows it to match more type of receivers.
LEARN KEY button
The production settings of HK05&05R have been configured and can be used directly. If it fails to work, please use the learn button to re-match.
How to set the function of learning button:
1. Disconnect the receiver's power cord and connect it again to restart the receiver.
2. Please press the "Study Button" (it is a small hole in the battery case, you need to use the needle to press it) of the remote control within 30 seconds and keep this action for 3-5 seconds.
3. If you hear your receiver making a beeping sound or the indicator light flashes a few times, the match is successful.
NOTE
1. If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
2. If you have multiple ceiling fans in your home, please make sure that the PIN code settings are different between them, otherwise it is likely that the transmitter next door activates the ceiling fan in your bedroom. This will cause the ceiling fan to turn on strangely while you sleep.
Easy to Install
1. Remove ceiling fan canopy from the mounting bracket
NOTE: Remove power from the circuit.Otherwise power can cause serious injury or death.
2. Installing receiver in ceiling fan
The receiver wires are labelled, and the wires all have the correct color codes.Make connections as follows,using the wire nuts suppliied.
Red receiver wire（AC IN L)......Red supply wire
White receiver wire (AC IN N)......White supply wire
White receiver wire (TO MOTOR N)......White com(FAN/LIGHT N) wire
Black receiver wire (TO MOTOR L)......Black fan wire
Blue receiver wire (TO LIGHT L)......Blue light wire
ATTENTION: Wire color maybe different in very old fans
3. LEARN KEY
Use the LEARN key to match the receivers.
4. Install a 3V battery
Install a 3V battery (NOT INCLUDE in the Package) in the remote, and you can control your fan now.
Package Includes
1 x Remote Control
1 x Receiver
1 x Wall Mount
6 x Wiring Cap
2 x Screw
1 x User Manual
(NOTE: 3V battery is not included)
Specification
- Input voltage: 110-120V
- AC Frequency: 50/60Hz
- Require Battery: 3V battery
- Properties of Lights in Controller: Relay contact on/off
- Transmission Mode: Radio Frequency (RF)
- Radio Frequency Band: 303.9MHz
- Remote Control Range: 60 ft
Fred Ulise
2025-08-24 14:00:36
Works well
M. McAleer
2025-08-05 17:56:55
My husband installed this himself. He said it was easy to do. Everything works like it should. The only thing I dislike is the remote fits loosely in the holder. We leave it on the wall but when you try to push a button it moves around. Still overall happy with my purchase. My house is older and has a light switch that turns off plugs also so this is so much more convenient.
Asim Malik
2025-07-29 13:14:49
My hunter remote stopped working and this replacement was an identical replacement. Very easy to replace and install for all the DIY.
Enelcee
2025-07-20 10:41:11
I bought this to replace a non-responsive remote receiver in a Harbor Breeze Ceiling Fan that I had purchased several years ago. This unit was a direct replacement and the receiver was roughly the same size as the old one. The wiring was also the same, so the installation was straight forward. The transmitter is a little bigger than the original and takes a 2032 button cell battery. I really like the light dimming feature! There is one thing that it does which is strange, the receiver has a nice feature that when you start the fan on the slowest setting, the receiver starts in the highest speed setting for about two seconds to get the blades turning and then it automatically goes back to the slowest setting. However; for some reason while the fan is in the slowest setting, you can hear and see the receiver randomly kick in to the highest setting for about two seconds and then drop back to the slowest setting? There is no rhyme or reason to when it does this, it is very random. This anomaly doesn't bother me all that much, it's just weird. One more thing is that this receiver is louder than the original, there is an audible "click" that comes from the receiver when changing speeds. Other than those two things it works fine and I'm glad to have my fan working again!
bubbajay
2025-07-17 17:31:42
Works like the original when it was new. A lot easier than replacing the entire fan.
APO
2025-02-04 10:05:58
The remote does not completely turn off the fan light (dim). Must use pull chain fan unit to completely to turn off. Return unit and will try again with same unit (reorder). Fan motor operation OK. Suprise that this old unit, controller had battery inside (USED) New unit no battery, everything work OK with new unit
Paul Schneeman
2024-12-24 16:22:14
My fan did not like the substitute for some reason, could of been a programming remote learning issue ? Don't know, wired fan directly to switch power, and used mechanical speed and direction switch chains which dangle down from fan was the solution when OEM electronic remote board fried. Open up original OEM board and notice capacitor and diode smoked, board burned.
MKShopper
2024-12-09 14:49:21
Easy to install. Needed a replacement remote kit for a Hunter fan. Got it installed in 1/2 hour. Easier than the original that came with the fan. Wires are clearly labeled which is great.
Recommended Products