Your cart is empty.
Your cart is empty.Product Description
Features:
-Combines with a flash cold shoe mount, umbrella holder and a light stand bracket.
-Updated cold shoe mount: Will firmly catch your flash speedlite when you are on moving condition.
-Updated metal locking wheel: Better support the cold shoe mount on top without breaking off.
-Umbrella holder: With a hole for holding umbrella, silver screw to lock and hold the umbrella.
-Light stand bracket mount: Comes with conversion screw 1/4”-20 to 3/8”-16, attach to a tripod/ light stand via 1/4” or 3/8” thread screw.
Specifications:
Material:whole aluminum alloy Dimensions: 3X1X4 in Weight: 5oz per pack
Package Contents: 2 x E Type Flash Bracket Umbrella Holder with 1/4”to 3/8” convert screw.
Note: Accessory only, camera and flashes are not included.
Chancy Rendezvous
2025-09-03 16:56:40
Take the (1/4-20 3/8-16) adapter out and you're left with an actual 5/8 female, which fits perfectly on standard 5/8 studs -- so many cheapie swivels turn out to be non-standard and don't fit. I mostly use these on the end of magic arms, but they fit great on any of my stands too. These are also a bit sturdier than others I've tried, not that they're asked to carry much weight. I typically do not use the umbrella holder on these kinds of swivels.The cold shoe doesn't have its own locking mechanism! I like having one less thing to fiddle with, but it means you can't double-lock down the flash extra tightly. Pick something else, obviously, if this might be an issue for you.
JJ Finklestein
2025-08-24 13:10:25
Sturdy and easy to use. The only negative is that the flash holder part is a "fixed" or non-adjustable clamp, depending 100% on the flash unit to hold the flash unit. Slightly more costly units have built-in clamps that tighten with a thumbscrew, which gives an ease of setup and added security so the flash does not fall off. Knowing of this "soft engineering point, I can deal with it and it is quite functional.
Mark Gilden
2025-08-05 18:21:30
If you have a flash or constant light on a stand and it doesn't support its own diffusion holder, this is the piece you need. I was working with hot tungsten lamps for a video job in a semi-permanent studio by one of my clients, and it was basically a 500 Watt bulb in a dish, which obviously casts a very harsh bright light with lots of shadow. I picked out some shoot-through umbrellas to get some basic diffusion of the light, and added this piece to go in between the light fixture and the stand to hold the umbrella rod. If you have worked with light setups like this before, you should be familiar as it is pretty standard/basic. Like other adapters of this sort, there is a hinge that lets you tilt the light to get a little extra control over where you are aiming. If you are using this with off camera flashes that use a shoe mount, it already comes with that preinstalled. In my case, I didn't need the cold shoe mount (the video lights screw into a 1/4" 20 threaded bolt), so I just removed the shoe mount which revealed exactly the connection I needed underneath. Very useful piece of kit for a simple setup.
RVS
2025-06-29 15:04:27
Durable and precisely machined mount of improved design eliminates unnecessary adjustment screw and clamp for photo flashes or other accessories such as radio triggers that typically incorporate their own locking mechanism, reducing failure points, while adding a front stop to achieve an even more secure fit. Serrated rotating hub incorporates multiple stops to provide accurate aiming and prevents slipping when tightened. Devices such as flash triggers with a locking wheel fit very nicely, although pressure may be required to fully advance the locking lever (if desired) on some devices so equipped.
Rafael
2025-06-16 16:00:42
Like the engineered design
Bob A
2025-06-03 13:55:03
The price was right, and very sturdy - good deal!
Mr. G
2025-05-14 17:29:12
They are inexpensive and will do the job but the most important part...the cold shoe adaptor on top has NO CLAMP or any way to keep the flash attached to it. The flash simply slides on and can just as easily slide off meaning you could have a broken flash with these. Find one that has a clamp.
Photographer
2025-05-07 15:16:50
Great value for the money. Functions well and the finish is very good.
tap and dies set
2025-04-16 18:07:38
Works we
Daniel
2025-03-18 15:19:19
Montage griffe porte flash difficile
Gianfranco
2025-03-14 10:57:47
Robusti, resistenti, adattabili a ogni sostegno (a vite o morsetto), costruito in lega e non in plastica, perfetti!
philoulefilou
2025-01-19 16:22:49
J'utilise ces supports pour les cliper sur mes têtes de trépied et pour pouvoir fixer les flashs cobra dessus. Matériel fiable et performant. Un bon rapport qualité-prix. Je recommande.
Gordon B.
2025-01-12 13:33:29
Perfect for my photography, better than expected
Recommended Products