Your cart is empty.
Your cart is empty.Product Description
Reliable Quality
Coolant reservoir hose heater hose Junction is made of upgrade material aluminium, which is harder than the original plastic coolant reservoir hose, not easy to break to extend the service life. What’s more, we equiped the hose with 3 manganese steel clamps to prevent the hose falling down from the connector, which has high strength, good toughness, and the surface has been treated with Dacromet, which is corrosion resistant.
Installation
The installation of the junction is easy. Connect the hoses to the connector, use the clamps to fix the hoses, not need any special skills.
Compatible with
Chevrolet Silverado 1500 1999-2013; Silverado 1500 Classic 2007; Silverado 1500HD 2001-2003; Silverado 1500HD 2005-2006; Silverado 1500HD Classic 2007; Silverado 2500 1999-2004; Silverado 2500HD 2001-2013; Silverado 2500 HD Classic 2007; Silverado 3500 2001-2006; Silverado 3500 Classic 2007; Silverado 3500HD 2007-2013; Suburban 1500 2000-2013; Suburban 2500 2000-2013; Tahoe 2000-2013.Avalance 2007-2013; Avalance 1500 2002-2006.
GMC Sierra 1500 1999-2013; Sierran 1500 Classic 2007; Sierra 1500 HD Classic 2007; Sierra 1500 HD 2001-2003; Sierra 1500 HD 2005-2006; Sierra 2500 1999-2004; Sierra 2500 HD 2001-2013; Sierra 2500 HD Classic 2007; Sierra 3500 2001-2006; Sierra 3500 Classic 2007; Sierra 3500 HD 2007-2013; Yukon 2000-2013; Yukon XL 1500 2000-2013; Yukon XL 2500 2000-2013. Cadillac Escalade 2002-2013; Escalade ESV 2003-2013; Escalade EXT 2002-2013.
APEX753
2025-09-03 10:12:21
Have had it installed and it hasnt given me any issues. Ive had it for almost a year. I will recommend this to anyone that needs it
AnimeSupplyUSA
2025-08-30 10:36:28
Bought this for my 2006 Cadillac Escalade. Love the aluminum, looks well made, casting seems consistent. Only issue I forsee are the clamps. As pictured you can see they are a little thinner, and actually a little larger in diameter. Being thinner and a little larger, they will 100% not apply as much tension as the factory clamps. Idk if they are still strong enough to hold, but I'm not going to take that chance and recommend to anyone, to just run the stock clamps. Still giving 5 stars despite this because the main product seems well made, and I'm glad someone is making obscure upgrade parts like this for our old trucks. Now I just wish someone would make the heater connector fittings in aluminum in 90 degree angles, using a wire clip, instead of the crappy quick connect clip that always fails.
jose lopez
2025-08-11 18:33:00
Fit perfect easy to install strong material better than the original
Silver Chief
2025-08-01 14:15:52
UPGRADE TO PEACE OF MIND. No cheap plastic to dry out and crack leaving YOU STRANDED.
Joe M.
2025-06-22 15:07:52
This unit arrived on time and with everything I needed to install. You will need a new razor blade to cut out the old plastic piece that is on the hose that is OEM. Installation was a breeze, and I was done in about 40 minutes. If this section of hose failed on your truck then this is what you should be replacing it with.
Tre
2025-06-10 15:43:09
Hose clamp are not strong enough
Jumping Jehozafat
2025-03-28 16:14:53
Absolute life saver on top of saving me a fortune to replace with oem part. On top of that the aluminum will last easily longer than the life of the vehicle.
jw
2025-02-13 17:17:10
Fit, performance.. did the job
Manuel Alvarez Jr
2025-02-07 17:57:44
Traer una en el caro o por si acaso se ofrece te saca de apuros en la carretera saludos
Recommended Products
$11.99
$ 5 .99 $5.99